定量显微镜表征煤工尘肺患者肺内颗粒物
本研究开发了定量显微镜-颗粒物(QM-PM)方法,用于表征美国煤工尘肺患者肺组织中的原位粉尘。QM-PM可重复地测量矿物密度和色素分数,与病理学家定性评估和SEM/EDS分析相当。当代矿工的矿物密度高于历史矿工和对照组,提示二氧化硅/硅酸盐粉尘暴露更高。
要点
- QM-PM可自动化、可重复地表征肺内二氧化硅/硅酸盐和碳质颗粒。
- 当代矿工矿物密度高于历史矿工和对照组。
- QM-PM与病理学家评估和SEM/EDS分析结果相当。
核心结论
- QM-PM能可靠、可重复、自动化地表征肺内二氧化硅/硅酸盐和碳质颗粒,有望用于职业性肺病理理解和暴露控制。
研究设计与样本
- 研究纳入85名煤工(62名历史矿工和23名当代矿工)及10名健康对照的肺组织样本,使用QM-PM分析并与病理学家定性评估和SEM/EDS比较。
主要发现
- 当代矿工矿物密度高于历史矿工(186 456 vs 63 727/mm3;P = .02)和对照组(4542/mm3)。
- 当代与历史矿工颗粒大小相似(中位面积1.00 vs 1.14 μm2;P = .46),双折射相似(中位灰度亮度80.9 vs 87.6;P = .29)。
关键数值与推荐
- QM-PM测量的矿物密度和色素分数与共识病理学家评分及SEM/EDS分析相当。
临床怎么用
- QM-PM可作为职业性肺病理中原位粉尘表征的工具,辅助理解暴露与疾病关系。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
CONTEXT.—: Current approaches for characterizing retained lung dust using pathologists' qualitative assessment or scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS) have limitations. OBJECTIVE.—: To explore polarized light microscopy coupled with image-processing software, termed quantitative microscopy-particulate matter (QM-PM), as a tool to characterize in situ dust in lung tissue of US coal miners with progressive massive fibrosis. DESIGN.—: We developed a standardized protocol using microscopy images to characterize the in situ burden of birefringent crystalline silica/silicate particles (mineral density) and carbonaceous particles (pigment fraction). Mineral density and pigment fraction were compared with pathologists' qualitative assessments and SEM/EDS analyses. Particle features were compared between historical (born before 1930) and contemporary coal miners, who likely had different exposures following changes in mining technology. RESULTS.—: Lung tissue samples from 85 coal miners (62 historical and 23 contemporary) and 10 healthy controls were analyzed using QM-PM. Mineral density and pigment fraction measurements with QM-PM were comparable to consensus pathologists' scoring and SEM/EDS analyses. Contemporary miners had greater mineral density than historical miners (186 456 versus 63 727/mm3; P = .02) and controls (4542/mm3), consistent with higher amounts of silica/silicate dust. Contemporary and historical miners had similar particle sizes (median area, 1.00 versus 1.14 μm2; P = .46) and birefringence under polarized light (median grayscale brightness: 80.9 versus 87.6; P = .29). CONCLUSIONS.—: QM-PM reliably characterizes in situ silica/silicate and carbonaceous particles in a reproducible, automated, accessible, and time/cost/labor-efficient manner, and shows promise as a tool for understanding occupational lung pathology and targeting exposure controls.
引用
- Hua JT, Cool CD, Lowers HA, et al. Characterizing Lung Particulates Using Quantitative Microscopy in Coal Miners With Severe Pneumoconiosis. Arch Pathol Lab Med. 2024. PMID: 37270802. doi:10.5858/arpa.2022-0427-OA
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。