文献速递关节外科

不锈钢股骨头比离子注入钴铬头降低翻修率:40,468例全髋置换分析

Stainless Steel Femoral Heads Reduce Rate of Revision When Compared to Ion-Implanted Chromium-Cobalt Heads With a Single Cemented Femoral Design: An Analysis of 40,468 Total Hip Replacements From the Australian Orthopedic Association National Joint Replacement Registry.
PubMed 文献 · J Arthroplasty · 2021-09-01

基于澳大利亚骨科协会国家关节置换登记系统,比较不锈钢与低摩擦离子处理(LFIT)钴铬股骨头在Exeter/Trident混合髋与高交联聚乙烯(XLPE)内衬中的翻修率。

要点

  • 两种合金间松动翻修率无差异,且不受年龄分层影响。

核心结论

  • 不锈钢股骨头较LFIT钴铬头翻修率更低,且LFIT植入物成本更高。
  • 推荐在Exeter/Trident混合髋配合XLPE内衬时使用不锈钢股骨头。

研究设计与样本

  • 基于澳大利亚骨科协会国家关节置换登记系统的回顾性队列分析。
  • 纳入所有因骨关节炎行初次Exeter/Trident混合髋置换并使用XLPE内衬的不锈钢或LFIT股骨头。
  • 采用Kaplan-Meier估计生存率,Cox比例风险模型校正年龄和性别比较翻修率。

主要发现

  • 共纳入40,468例全髋置换。
  • 两种合金间松动翻修率无差异,按年龄分层亦无差异。

临床怎么用

  • 在使用Exeter/Trident混合髋配合XLPE内衬时,优先选择不锈钢股骨头以降低翻修风险。
  • 考虑LFIT钴铬头增加的成本,不锈钢头具有更优的性价比。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: In order to reduce the incidence of total hip joint replacement revision for wear, multiple advanced materials and alloys targeting hip replacement tribology have been introduced. Ion implantation of chromium-cobalt heads is thought to reduce wear due to increased surface hardness and lower friction. These advances in technology result in additional manufacturing costs. However, it is unclear whether these attributes result in a decreased rate of revision for wear and when used with modern highly crosslinked polyethylene (XLPE). The aim of this study is to compare the survivorship of stainless steel and ion-implanted chromium-cobalt femoral heads in order to determine whether ion implantation has a lower risk of revision. METHODS: Data from the Australian Orthopedic Association National Joint Replacement Registry included all stainless steel and low-friction ion-treated (LFIT) femoral heads used in conjunction with a primary Exeter/Trident hip replacement combination and XLPE liners performed for osteoarthritis. Kaplan-Meier estimates of survivorship were used to describe the time to first revision. Hazard ratios (HRs) from Cox proportional hazard models, with adjustment for age and gender, were used to compare revision rates between the 2 groups. RESULTS: There were 40,468 total hip replacements that met the inclusion criteria. Stainless steel heads had a lower revision rate compared to LFIT chromium-cobalt heads (HR 0.87, 95% confidence interval 0.76-1.00, P = .048). The difference in the rate of revision was even greater when 32-mm heads were used (HR 0.72, 95% confidence interval 0.58-0.89, P = .002). There was no difference in revision for loosening between head alloys or when stratified by age. CONCLUSION: Given the increased costs associated with LFIT implants and the lower rate of revision for stainless steel heads, we recommend the use of a stainless steel heads when using an Exeter/Trident hybrid hip with an XLPE liner.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Babazadeh S, de Steiger RN, Peng Y, et al. Stainless Steel Femoral Heads Reduce Rate of Revision When Compared to Ion-Implanted Chromium-Cobalt Heads With a Single Cemented Femoral Design: An Analysis of 40,468 Total Hip Replacements From the Australian Orthopedic Association National Joint Replacement Registry. J Arthroplasty. 2021. PMID: 34521567. doi:10.1016/j.arth.2021.08.024

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。