文献速递关节外科

金属背衬陶瓷对陶瓷全髋关节置换10年生存率

Survivorship of Ceramic-on-Ceramic Total Hip Arthroplasty With Metal-Backed Acetabular Liners at 10 Years.
PubMed 文献 · J Arthroplasty · 2021-06-02

研究纳入422例患者共468例连续全髋关节置换,使用非骨水泥柄、压配杯和金属背衬衬里系统,平均随访10年。总体10年假体生存率为93.8%,翻修最常见原因为第三代陶瓷衬里碎裂(2.4%),WOMAC评分从术前50.1显著改善至术后1年13.2。结论认为该金属背衬衬里系统长期结果满意,但应避免使用第三代陶瓷衬里。

要点

  • 总体10年假体生存率93.8%,髋臼杯99.3%、股骨柄97.5%、头/衬里97.0%。
  • 翻修最常见原因为第三代陶瓷髋臼衬里碎裂,占2.4%。
  • WOMAC评分从术前50.1显著改善至术后1年13.2,1年与10年时不同手术入路和 bearing 类型间无差异。

核心结论

  • 使用非骨水泥柄、压配杯和金属背衬衬里系统的全髋关节置换提供满意的长期结果,翻修率与其他市售系统相当。
  • 金属背衬衬里系统发生安装不良的风险低。
  • 应避免使用第三代陶瓷衬里,因其似乎更易碎裂。

研究设计与样本

  • 回顾性随访研究,纳入422例患者共468例连续全髋关节置换,平均随访10年。
  • 所有关节置换均使用非骨水泥柄、压配杯和金属背衬衬里系统。
  • 分析手术与临床数据、并发症和翻修,比较术前、术后1年和10年WOMAC评分。

主要发现

  • 总体10年假体生存率为93.8%。
  • 头与衬里的10年生存率为97.0%,股骨柄为97.5%,髋臼杯为99.3%。
  • 翻修最常见原因为第三代(BIOLOX forte)陶瓷髋臼衬里碎裂,占2.4%。
  • 平均WOMAC评分从术前50.1显著改善至术后1年13.2。
  • 术后1年和10年时,不同手术入路和 bearing 类型之间WOMAC评分无差异。

临床怎么用

  • 对于初次全髋关节置换,可考虑使用金属背衬衬里系统以便于翻修时更换陶瓷衬里。
  • 应避免使用第三代陶瓷衬里以降低碎裂相关翻修风险。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Ceramic-on-ceramic bearings are becoming increasingly popular in primary total hip arthroplasty (THA). To enhance ceramic-on-ceramic liner exchange in case of revision surgery, metal-backed liner systems have been proposed. Little is known about the clinical performance of these implants. The purpose of this study is to evaluate a metal-backed liner implant system for primary THA. METHODS: A total of 422 patients (with 468 consecutive THAs) were followed over a mean period of 10 years. All arthroplasties were performed with a cementless stem, a press-fit cup, and a metal-backed liner system. Surgical and clinical data, complications, and revisions were analyzed. The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) before surgery and at 1 and 10 years after surgery were compared. RESULTS: The overall 10-year implant survival rate was 93.8%. The survival rate was 97.0% for heads and liners, 97.5% for stem, and 99.3% for acetabular cup. The most common reason for revision was ceramic breakage (2.4%) of the third-generation (BIOLOX forte) acetabular liner. Mean WOMAC score improved significantly from 50.1 before surgery to 13.2 at 1 year after surgery. There was no difference in WOMAC scores between surgical approach and type of bearing at 1 and 10 years after surgery. CONCLUSION: THA using cementless stem, press-fit cup, and metal-backed liner system provides satisfactory long-term outcomes, with revision rate comparable to that with other systems available in the market. The metal-backed liner system has low risk of mal-seating. Third-generation ceramic liners should be avoided as they seem to be more prone to breakage.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Wagner M, Schönthaler H, Endstrasser F, et al. Survivorship of Ceramic-on-Ceramic Total Hip Arthroplasty With Metal-Backed Acetabular Liners at 10 Years. J Arthroplasty. 2021. PMID: 34176691. doi:10.1016/j.arth.2021.05.038

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。