新型3D打印非骨水泥全膝关节置换术的中期随访结果优异
本研究为单中心注册研究,回顾性分析341例接受3D打印非骨水泥Triathlon Tritanium全膝关节置换术的患者,随访4至6.8年。结果显示KOOS JR和VR/SF-12评分均显著改善,5年假体生存率总体为97.06%,无菌性松动为终点时达98.40%。
要点
- 3D打印非骨水泥全膝关节置换术后中期患者报告结局显著改善。
- 5年总体翻修率为2.94%,假体生存率97.06%。
- 以无菌性松动为终点的5年生存率达98.40%。
核心结论
- 3D打印非骨水泥全膝关节系统在中期的随访中显示出优异的假体生存率和临床结局。
研究设计与样本
- 单中心注册研究,回顾性分析前瞻性收集的341例非骨水泥Triathlon Tritanium全膝关节置换术数据,随访4至6.8年。
主要发现
- KOOS JR评分从术前平均33.14改善至术后平均84.12(p<0.001)。
- VR/SF-12身体健康评分从术前平均31.21改善至术后平均42.62(p<0.001)。
- VR/SF-12心理健康评分从术前平均38.15改善至术后平均55.09(p<0.001)。
- 共11例翻修,总翻修率2.94%,其中假体周围感染5例(1.34%),松动3例(0.80%),不稳定2例(0.53%),疼痛1例(0.27%)。
- 5年总体生存率97.06%,以无菌性松动为终点的生存率98.40%,3D打印胫骨组件生存率99.5%。
临床怎么用
- 对于适合非骨水泥固定的患者,3D打印非骨水泥全膝关节置换术可提供良好的中期生存率和功能改善。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: Cementless total knee arthroplasty (TKA) offers the potential for strong biological fixation compared with cemented TKA where fixation is achieved by the mechanical integration of the cement. Few mid-term results are available for newer cementless TKA designs, which have used additive manufacturing (3D printing). The aim of this study was to present mid-term clinical outcomes and implant survivorship of the cementless Stryker Triathlon Tritanium TKA. METHODS: This was a single institution registry review of prospectively gathered data from 341 cementless Triathlon Tritanium TKAs at four to 6.8 years follow-up. Outcomes were determined by comparing pre- and postoperative Knee Injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS JR) scores, and pre- and postoperative 12-item Veterans RAND/Short Form Health Survey (VR/SF-12) scores. Aseptic loosening and revision for any reason were the endpoints which were used to determine survivorship at five years. RESULTS: At mid-term follow-up, the mean KOOS JR score improved significantly from 33.14 (0 t0 85, standard deviation (SD) 21.88) preoperatively to 84.12 (15.94 to 100, SD 20.51) postoperatively (p < 0.001), the mean VR/SF-12 scores improved significantly from physical health (PH), 31.21 (SD 5.32; 23.99 to 56.77) preoperatively to 42.62 (SD 10.72; 19.38 to 56.82) postoperatively (p < 0.001) and the mental health (MH), 38.15 (SD 8.17; 19.06 to 60.75) preoperatively to 55.09 (SD 9.64; 19.06 to 66.98) postoperatively (p < 0.001). A total of 11 revisions were undertaken, with an overall revision rate of 2.94%, including five for periprosthetic joint infection (1.34%), three for loosening (0.80%), two for instability (0.53%), and one for pain (0.27%). The overall survivorship was 97.06% and survivorship for aseptic loosening as the endpoint was 98.40%, with a 99.5% survivorship of the 3D-printed tibial component. CONCLUSION: This 3D-printed cementless total knee system shows excellent survivorship at mid-term follow-up. This design and the ability to obtain cementless fixation offers promise for excellent long-term durability. Cite this article: Bone Joint J 2021;103-B(6 Supple A):32-37.
引用
- Restrepo S, Smith EB, Hozack WJ, et al. Excellent mid-term follow-up for a new 3D-printed cementless total knee arthroplasty. Bone Joint J. 2021. PMID: 34053273. doi:10.1302/0301-620X.103B6.BJJ-2020-2096.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。