文献速递骨质疏松与代谢性骨病创伤骨科

骨折风险评估:最新进展

Fracture Risk Assessment: An Update.
PubMed 文献 · J Bone Joint Surg Am · 2021-01-01

该综述更新了骨折风险评估的进展,指出双能X线吸收测定法(DXA)仍是骨质疏松筛查和疗效监测的标准;骨小梁评分(TBS)作为DXA附加软件,与骨微结构相关,是独立骨折风险因素,可能有助于在骨量减少(-1.0至-2.4标准差)、低能量骨折但骨密度正常或轻度降低、以及已知损害骨微结构疾病的人群中进一步分层骨折风险;FRAX、Garvan和QFracture等工具可在无骨密度数据时评估多临床因素对骨折风险的影响,输出特定时间段的绝对骨折风险,有助于识别高危患者并区分骨密度相似患者的骨折风险;对于复杂临床病例,联合方法可能提高识别高危患者的准确性。

要点

  • DXA仍是骨质疏松筛查和监测治疗反应的标准,因其可及、经济且辐射低。
  • TBS是DXA附加软件,与骨微结构相关,是独立骨折风险因素,可能有助于特定人群风险分层。
  • FRAX、Garvan和QFracture等工具可在无骨密度时评估多因素骨折风险,输出绝对风险。

核心结论

  • 骨折风险评估工具和临床数据的扩展提高了识别高骨折风险个体的能力。
  • DXA仍是骨质疏松筛查和监测治疗反应的标准。
  • TBS是独立骨折风险因素,可能有助于在特定人群中进一步分层骨折风险。
  • 骨折风险评估工具可在无骨密度数据时评估多临床因素对骨折风险的影响。
  • 对于复杂临床病例,联合方法可能提高识别高危患者的准确性。

研究设计与样本

  • 本文为综述,检索范围原文未报告。

主要发现

  • TBS与骨微结构相关,是独立骨折风险因素。
  • TBS可能有助于在骨密度为骨量减少范围(-1.0至-2.4标准差)的人群中进一步分层骨折风险。
  • TBS可能有助于在低能量骨折但骨密度正常或仅轻度降低的人群中进一步分层骨折风险。
  • TBS可能有助于在已知损害骨微结构的疾病人群中进一步分层骨折风险。
  • FRAX、Garvan骨折风险计算器和QFracture评估多个临床因素对骨折风险的影响,输出特定时间段的绝对骨折风险。

关键数值与推荐

  • DXA仍是骨质疏松筛查和监测治疗反应的标准。
  • TBS是DXA软件附加功能,利用腰椎DXA成像生成与骨微结构相关的输出。
  • 骨量减少范围定义为骨密度-1.0至-2.4标准差。
  • FRAX、Garvan骨折风险计算器和QFracture可在无骨密度数据时评估骨折风险。
  • 每种工具输出特定时间段的绝对骨折风险。

临床怎么用

  • 使用DXA进行骨质疏松筛查和监测治疗反应。
  • 考虑使用TBS在骨量减少、低能量骨折但骨密度正常或轻度降低、以及已知损害骨微结构疾病的人群中进一步分层骨折风险。
  • 使用FRAX、Garvan或QFracture等工具在无骨密度数据时评估骨折风险。
  • 对于复杂临床病例,采用联合方法识别高危患者。

局限性

  • 原文未报告。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

➤: Our ability to accurately identify high fracture risk in individuals has improved as the volume of clinical data has expanded and fracture risk assessment tools have been developed. ➤: Given its accessibility, affordability, and low radiation exposure, dual x-ray absorptiometry (DXA) remains the standard for osteoporosis screening and monitoring response to treatment. ➤: The trabecular bone score (TBS) is a DXA software add-on that uses lumbar spine DXA imaging to produce an output that correlates with bone microarchitecture. It has been identified as an independent fracture risk factor and may prove useful in further stratifying fracture risk among those with a bone mineral density (BMD) in the osteopenic range (-1.0 to -2.4 standard deviations), in those with low-energy fractures but normal or only mildly low BMD, or in those with conditions known to impair bone microarchitecture. ➤: Fracture risk assessment tools, including the Fracture Risk Assessment Tool (FRAX), Garvan fracture risk calculator, and QFracture, evaluate the impact of multiple clinical factors on fracture risk, even in the absence of BMD data. Each produces an absolute fracture risk output over a defined interval of time. When used appropriately, these enhance our ability to identify high-risk patients and allow us to differentiate fracture risk among patients who present with similar BMDs. ➤: For challenging clinical cases, a combined approach is likely to improve accuracy in the identification of high-risk patients who would benefit from the available osteoporosis therapies.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. Cozadd AJ, Schroder LK, Switzer JA, et al. Fracture Risk Assessment: An Update. J Bone Joint Surg Am. 2021. PMID: 33830957. doi:10.2106/JBJS.20.01071

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。