银涂层在关节置换部件中的作用
本文综述了关节置换部件银涂层的不同应用方法,重点关注银释放量与持续时间、临床已用银涂层假体的经验,以及平衡银对细菌和真核细胞效应、开发适于骨长入的银涂层钛部件的未来策略。
要点
- 银涂层多用于不与骨直接接触的假体部件,如肿瘤或复杂翻修中的长骨部分/全关节置换。
- 临床用银涂层植入物在涂层方法、总银含量和银释放速率上差异很大。
- 银涂层预防假体周围感染的疗效存在争议,且存在精皮症等安全性担忧。
核心结论
- 银涂层是金属表面抗菌的有前景方案,但需平衡抗菌效果与对真核细胞的毒性。
- 银涂层预防假体周围感染的疗效尚有争议,安全性问题如精皮症值得关注。
- 未来需开发适于骨长入的银涂层钛部件,并确定抑制细菌且保持骨传导性的最佳银含量。
研究设计与样本
- 综述,总结关节置换部件银涂层的应用方法、临床经验与未来策略。
主要发现
- 临床用银涂层植入物在涂层方法、总银含量和银释放速率上差异很大。
- 银涂层多应用于不与骨直接接触的部件,如肿瘤或复杂翻修中的长骨部分或全关节置换。
- 银涂层用于非骨水泥固定部件少见,但可能因改善骨传导性的表面改性增加细菌黏附而具需求。
临床怎么用
- 临床选用银涂层假体时需关注其涂层方法、总银含量和银释放速率差异。
- 骨接触面应用银涂层需优化银含量以平衡抗菌与骨传导性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
Periprosthetic joint infection (PJI) is one of the most dreaded complications after arthroplasty surgery; thus numerous approaches have been undertaken to equip metal surfaces with antibacterial properties. Due to its antimicrobial effects, silver is a promising coating for metallic surfaces, and several types of silver-coated arthroplasty implants are in clinical use today. However, silver can also exert toxic effects on eukaryotic cells both in the immediate vicinity of the coated implants and systemically. In most clinically-used implants, silver coatings are applied on bulk components that are not in direct contact with bone, such as in partial or total long bone arthroplasties used in tumour or complex revision surgery. These implants differ considerably in the coating method, total silver content, and silver release rates. Safety issues, such as the occurrence of argyria, have been a cause for concern, and the efficacy of silver coatings in terms of preventing PJI is also controversial. The application of silver coatings is uncommon on parts of implants intended for cementless fixation in host bone, but this option might be highly desirable since the modification of implant surfaces in order to improve osteoconductivity can also increase bacterial adhesion. Therefore, an optimal silver content that inhibits bacterial colonization while maintaining osteoconductivity is crucial if silver were to be applied as a coating on parts intended for bone contact. This review summarizes the different methods used to apply silver coatings to arthroplasty components, with a focus on the amount and duration of silver release from the different coatings; the available experience with silver-coated implants that are in clinical use today; and future strategies to balance the effects of silver on bacteria and eukaryotic cells, and to develop silver-coated titanium components suitable for bone ingrowth. Cite this article: Bone Joint J 2021;103-B(3):423-429.
引用
- Diez-Escudero A, Hailer NP. The role of silver coating for arthroplasty components. Bone Joint J. 2021. PMID: 33641432. doi:10.1302/0301-620X.103B3.BJJ-2020-1370.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。