文献速递关节外科

36mm金属对金属全髋关节置换系统的翻修预测因素与生存分析:大型单中心回顾性队列研究

Predictive Factors for Revision and Survivorship Analysis of a Prevalent 36-mm Metal-on-Metal Total Hip Replacement System: A Large Single-Center Retrospective Cohort Study.
PubMed 文献 · J Arthroplasty · 2020-10-17

该研究纳入2005-2012年单中心1212例36mm Corail-Pinnacle金属对金属全髋置换,10年生存率83.4%(95%CI 81.3-85.5),翻修率9.8%。女性(HR=1.608)和高偏移距股骨柄(HR=2.573)是全因翻修的显著预测因素;2007年后植入的组件翻修数无显著阶跃增加。

要点

  • 10年生存率83.4%,翻修率9.8%,主要失败原因为金属碎屑不良反应。
  • 女性性别(HR=1.608)和高偏移距股骨柄(HR=2.573)是全因翻修的显著预测因素。
  • 2007年后植入的组件翻修数无显著阶跃增加。

核心结论

  • 该36mm金属对金属全髋置换系统10年失败率高达16.6%,主要原因为金属碎屑不良反应。
  • 女性性别和高偏移距股骨柄是全因翻修的显著预测因素。
  • 2007年及以后植入的组件翻修数无显著阶跃增加,但仍建议进一步研究验证制造差异的影响。

研究设计与样本

  • 单中心回顾性队列研究,纳入2005-2012年植入的1212例36mm Corail-Pinnacle金属对金属全髋置换。
  • 采用Kaplan-Meier法、Cox回归和中断时间序列分析评估患者及植入物相关变量和植入年份对翻修风险的影响。
  • 平均随访7.3年,61%患者随访至少7年。

主要发现

  • 多因素模型确认女性性别和高偏移距股骨柄为翻修的显著预测因素。
  • 2007年后植入的组件翻修数相比2007年前无统计学显著阶跃增加。

临床怎么用

  • 对于使用该36mm金属对金属全髋置换系统的患者,尤其是女性和使用高偏移距股骨柄者,应加强随访监测翻修风险。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: To our knowledge, this is the largest single-center cohort of the 36-mm Corail-Pinnacle metal-on-metal total hip replacements system, aiming to determine 10-year survivorship and identify predictors of revision. We further assessed year of implantation given reports of manufacturing variations affecting shells made after 2006 predisposing these components to increasing wear. METHODS: All Corail-Pinnacle 36-mm metal-on-metal hips implanted in a single center (2005-2012). The effect of patient and implant-related variables, and year of implantation on revision risk was assessed using Kaplan-Meier, Cox regression, and interrupted time series analysis. RESULTS: In total, 1212 metal-on-metal total hip replacements were implanted with a 10-year survival rate of 83.4% (95% confidence interval [CI] = 81.3-85.5). Mean follow-up duration was 7.3 years with 61% of patients reaching a minimum of 7 years of follow-up. One hundred nineteen patients required revision surgery (9.8%). Univariate analysis identified female gender (hazard ratio [HR] = 1.608, CI = 1.093-2.364, P = .016), age at implantation (HR = 0.982, CI = 0.968-0.997, P = .019), smaller 50-mm to 54-mm cup diameter (HR = 1.527, CI = 1.026-2.274, P = .037), and high-offset stems (HR = 2.573, CI = 1.619-4.089, P < .001) as predictors of revision. Multivariate modeling confirmed female gender and high-offset stems as significant predictors of revision. For components implanted after 2007, the number of revisions showed no statistically significant step increase compared to pre-2007 implantation. CONCLUSION: We observed a high 10-year failure rate (16.6%) with this implant, mostly due to adverse reaction to metal debris. Female gender and high femoral offset stems were significant predictors for all-cause revision. Year of implantation was not significantly associated with an increasing number of revisions from 2007 onwards, although further studies to validate the impact of manufacturing discrepancies are recommended.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Pearce O, Matharu GS, Bolland BJ, et al. Predictive Factors for Revision and Survivorship Analysis of a Prevalent 36-mm Metal-on-Metal Total Hip Replacement System: A Large Single-Center Retrospective Cohort Study. J Arthroplasty. 2020. PMID: 33189496. doi:10.1016/j.arth.2020.10.028

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。