单侧Crowe-IV型发育性髋关节发育不良患者骨盆形态的三维成像与分析评估
纳入20例单侧Crowe-IV型发育性髋关节发育不良患者,以健侧为正常对照,基于骶骨基底建立坐标系和虚拟前骨盆平面,三维分析双侧骨盆取向及尺寸体积。患侧半骨盆在矢状面前倾、横断面旋转、冠状面倾斜,且长度、宽度、高度和体积均显著小于健侧。作者认为这些不对称异常可能影响全髋关节置换术中髋臼假体的定位。
要点
- 患侧髂前上棘较健侧位于下方和前方。
- 患侧髋旋转中心较健侧位于下方和内侧。
- 患侧半骨盆长度、宽度、高度和体积均显著小于健侧。
核心结论
- 三维成像技术发现单侧Crowe-IV型发育性髋关节发育不良患者患侧半骨盆存在不对称异常。
- 更好地理解这些形态变化可能影响全髋关节置换术中髋臼假体的定位。
- 骨科医生在全髋关节置换术中应考虑患侧半骨盆前倾及患侧旋转中心异常位置导致的髋臼假体定位误差。
研究设计与样本
- 纳入20例单侧Crowe-IV型发育性髋关节发育不良患者,所有患者对侧视为正常。
- 在重建骨盆模型中基于骶骨基底建立坐标系,通过建立虚拟前骨盆平面评估患侧骨盆取向(倾斜、旋转和倾斜度)。
- 建立双侧髂前上棘和髋旋转中心坐标,比较双侧骨盆的尺寸和体积参数。
主要发现
- 患侧髂前上棘较健侧位于下方和前方(y轴坐标P=0.001;z轴坐标P=0.031)。
- 患侧髋旋转中心较健侧位于下方和内侧(x轴坐标P<0.001;y轴坐标P=0.003)。
- 患侧半骨盆相对健侧半骨盆在矢状面前倾,平均8.05°(SD 3.57°)。
- 患侧半骨盆相对健侧半骨盆在横断面向前旋转,平均3.31°(SD 1.41°)。
- 患侧半骨盆相对健侧半骨盆在冠状面向尾侧倾斜,平均2.04°(SD 0.81°)。
关键数值与推荐
- 患侧半骨盆长度显著小于健侧(P=0.014)。
- 患侧半骨盆宽度显著小于健侧(P=0.009)。
- 患侧半骨盆高度显著小于健侧(P=0.035)。
- 患侧半骨盆体积显著小于健侧(P=0.002)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: Morphological abnormalities are present in patients with developmental dysplasia of the hip (DDH). We studied and compared the pelvic anatomy and morphology between the affected hemipelvis with the unaffected side in patients with unilateral Crowe type IV DDH using 3D imaging and analysis. METHODS: A total of 20 patients with unilateral Crowe-IV DDH were included in the study. The contralateral side was considered normal in all patients. A coordinate system based on the sacral base (SB) in a reconstructed pelvic model was established. The pelvic orientations (tilt, rotation, and obliquity) of the affected side were assessed by establishing a virtual anterior pelvic plane (APP). The bilateral coordinates of the anterior superior iliac spine (ASIS) and the centres of hip rotation were established, and parameters concerning size and volume were compared for both sides of the pelvis. RESULTS: The ASIS on the dislocated side was located inferiorly and anteriorly compared to the healthy side (coordinates on the y-axis and z-axis; p = 0.001; p = 0.031). The centre of hip rotation on the dislocated side was located inferiorly and medially compared to the healthy side (coordinates on the x-axis and the y-axis; p < 0.001; p = 0.003). The affected hemipelvis tilted anteriorly in the sagittal plane (mean 8.05° (SD 3.57°)), anteriorly rotated in the transverse plane (mean 3.31° (SD 1.41°)), and tilted obliquely and caudally in the coronal plane (mean 2.04° (SD 0.81°)) relative to the healthy hemipelvis. The affected hemipelvis was significantly smaller in the length, width, height, and volume than the healthy counterpart. (p = 0.014; p = 0.009; p = 0.035; p = 0.002). CONCLUSION: Asymmetric abnormalities were identified on the affected hemipelvis in patients with the unilateral Crowe-IV DDH using 3D imaging techniques. Improved understanding of the morphological changes may influence the positioning of the acetabular component at THA. Acetabular component malpositioning errors caused by anterior tilt of the affected hemi pelvis and the abnormal position of the affected side centre of rotation should be considered by orthopaedic surgeons when undertaking THA in patients with Crowe-IV DDH. Cite this article: Bone Joint J 2020;102-B(10):1311-1318.
引用
- Huang YF, Gao YH, Li YR, et al. Assessment of pelvic morphology using 3D imaging and analysis in unilateral Crowe-IV developmental dysplasia of the hip. Bone Joint J. 2020. PMID: 32993337. doi:10.1302/0301-620X.102B10.BJJ-2020-0317.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。