混合经胫骨技术结合前内侧入路与经胫骨入路的优势:一项前瞻性随机对照试验
该前瞻性随机对照试验将30例原发性前交叉韧带撕裂患者随机分为经胫骨、前内侧入路或混合经胫骨技术组进行股骨隧道定位,术后6周行三维CT测量。混合经胫骨技术获得的股骨隧道开口位置与前内侧入路技术同样解剖,但隧道更长、角度更小,可能有助于减少移植物应变和不匹配。
要点
- 混合经胫骨技术股骨开口高度和深度与前内侧入路无显著差异(P=.629和P=.582)。
- 股骨隧道平均长度:前内侧入路组35.2mm、混合经胫骨组41.6mm、经胫骨组54.1mm(P<.001)。
- 前内侧入路组股骨隧道在冠状面和矢状面成角显著大于经胫骨组和混合经胫骨组。
核心结论
- 混合经胫骨技术获得的股骨开口位置与前内侧入路技术同样解剖,但产生的股骨隧道更长、成角更小,可能有助于减少移植物应变和长度不匹配。
- 作者认为这种混合方法可能代表经胫骨和前内侧入路两种技术的有益结合。
研究设计与样本
- 前瞻性随机对照试验,证据等级2级。
- 连续纳入30例原发性前交叉韧带撕裂患者,随机分配至经胫骨组、前内侧入路组或混合经胫骨组进行股骨隧道定位。
- 所有患者术后6周行术侧膝关节三维计算机断层扫描。
- 测量股骨和胫骨隧道开口位置、隧道长度以及矢状面和冠状面移植物弯曲角度。
主要发现
- 三组间胫骨隧道长度和开口位置相同。
- 前内侧入路组和混合经胫骨组股骨开口位置在高度(P=.629)和深度(P=.582)方面相同。
- 与经胫骨组相比,前内侧入路组和混合经胫骨组股骨开口在髁间窝内显著更高(P<.001和P<.001)且更浅(P=.014和P=.022)。
- 股骨隧道平均长度三组间差异显著:前内侧入路组35.2mm、混合经胫骨组41.6mm、经胫骨组54.1mm(P<.001)。
- 经胫骨组与混合经胫骨组间冠状面(P=.190)和矢状面(P=.358)移植物弯曲角度无差异;前内侧入路组股骨隧道在冠状面(17.7°[P<.001]和12.5°[P=.006])和矢状面(13.5°[P<.001]和10.5°[P=.013])成角显著大于经胫骨组和混合经胫骨组。
临床怎么用
- 原文未据此给出推荐。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: The anteromedial (AM) portal and transtibial (TT) approaches are 2 common anterior cruciate ligament (ACL) femoral tunnel drilling techniques, each with unique benefits and disadvantages. A hybrid TT (HTT) technique using medial portal guidance of a flexible TT guide wire has recently been described that may combine the strengths of both the AM portal and the TT approaches. HYPOTHESIS: The HTT technique will achieve anatomic femoral tunnel apertures similar to the AM portal technique, with improved femoral tunnel length and orientation. STUDY DESIGN: Randomized controlled trial; Level of evidence, 2. METHODS: A total of 30 consecutive patients with primary ACL tears were randomized to undergo the TT, AM portal, or HTT technique for femoral tunnel positioning at the time of reconstruction. All patients underwent 3-dimensional computed tomography of the operative knee at 6 weeks postoperatively. Femoral and tibial tunnel aperture positions and tunnel lengths, as well as graft bending angles in the sagittal and coronal planes, were measured. RESULTS: Tibial tunnel lengths and aperture positions were identical between the 3 groups. The AM portal and HTT techniques achieved identical femoral aperture positions in regard to both height (P = .629) and depth (P = .582). By contrast, compared with the AM portal and HTT techniques, femoral apertures created with the TT technique were significantly higher (P < .001 and P < .001, respectively) and shallower (P = .014 and P = .022, respectively) in the notch. The mean femoral tunnel length varied significantly between the groups, measuring 35.2, 41.6, and 54.1 mm for the AM portal, HTT, and TT groups, respectively (P < .001). Last, there was no difference between the mean coronal (P = .190) and sagittal (P = .358) graft bending angles between the TT and HTT groups. By contrast, compared with the TT and HTT techniques, femoral tunnels created with the AM portal technique were significantly more angulated in the coronal plane (17.7° [P < .001] and 12.5° [P = .006], respectively) and sagittal plane (13.5° [P < .001] and 10.5° [P = .013], respectively). CONCLUSION: This prospective randomized controlled trial found that the HTT technique achieved femoral aperture positions equally as anatomic as the AM portal technique but produced longer, less angulated femoral tunnels, which may help reduce graft strain and mismatch. As such, this hybrid approach may represent a beneficial combination of both the TT and the AM portal techniques. REGISTRATION: NCT02795247 (ClinicalTrials.gov identifier).
引用
- Trofa DP, Saltzman BM, Corpus KT, et al. A Hybrid Transtibial Technique Combines the Advantages of Anteromedial Portal and Transtibial Approaches: A Prospective Randomized Controlled Trial. Am J Sports Med. 2020. PMID: 33017169. doi:10.1177/0363546520956645
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。