文献速递运动医学关节外科

线性判别分析利用生物力学变量成功预测膝关节损伤结局

Linear Discriminant Analysis Successfully Predicts Knee Injury Outcome From Biomechanical Variables.
PubMed 文献 · Am J Sports Med · 2020-07-21

本研究在42名健康运动参与者的体内动力学与运动学基础上,将分层后的膝关节力/力矩值输入尸体冲击模拟器,采集韧带应变与膝关节动力学数据,并用线性判别分析分类损伤结局。结果显示15因子模型的分类准确率达94.1%,对5种损伤分类的AUC均达0.98或更高。

要点

  • 15因子线性判别分析模型对5种膝关节损伤分类的准确率为94.1%,AUC均达0.98或更高。
  • 5因子模型对5种损伤结局的AUC均达0.74或更高,其中4种分类预测为「良好」。
  • 10因子模型将AUC提升至0.86或更高,对5种损伤分类均为「优秀」预测。

核心结论

  • 在膝关节屈曲25°下使用机械冲击模拟器的动力学数据,线性判别分析能准确预测膝关节损伤结局。
  • 借助临床相关的动力学数据,有可能确定损伤的临床风险以及单一或合并膝关节损伤的可能表现。

研究设计与样本

  • 控制性实验室研究,测量42名健康运动参与者的体内动力学与运动学,用于确定3个自由度膝关节力/力矩(膝外展力矩、胫骨前剪切、胫骨内旋)的损伤风险分层(低、中、高)。
  • 将分层后的动力学值输入尸体冲击模拟器,在模拟落地任务中评估韧带应变与膝关节动力学,使用单轴和多轴测力传感器及植入式应变传感器采集机械数据。
  • 采用线性判别分析,基于人口学和生物力学输入变量判定损伤结局的分类能力。

主要发现

  • 5因子模型(Entropy R2=0.26)对全部5种损伤结局(前交叉韧带、内侧副韧带、前交叉韧带+内侧副韧带、前交叉韧带+内侧副韧带+半月板、前交叉韧带+半月板)的AUC为0.74或更高,其中4种损伤分类预测为「良好」。
  • 10因子模型(Entropy R2=0.66)将AUC提升至0.86或更高,对5种损伤分类均为「优秀」预测。
  • 15因子模型(Entropy R2=0.85)产生94.1%的准确率,对全部5种损伤分类的AUC为0.98或更高。

临床怎么用

  • 作者指出,损伤结局在很大程度上由特定力学机制所表征,这些机制可区分前交叉韧带、内侧副韧带和内侧半月板损伤。
  • 作者指出,随着对损伤力学机制更深入的理解,可设计改进的介入性预康复方案以减少这些损伤。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: The most commonly damaged structures of the knee are the anterior cruciate ligament (ACL), medial collateral ligament (MCL), and menisci. Given that these injuries present as either isolated or concomitant, it follows that these events are driven by specific mechanics versus coincidence. This study was designed to investigate the multiplanar mechanisms and determine the important biomechanical and demographic factors that contribute to classification of the injury outcome. HYPOTHESIS: Linear discriminant analysis (LDA) would accurately classify each injury type generated by the mechanical impact simulator based on biomechanical input variables (ie, ligament strain and knee kinetics). STUDY DESIGN: Controlled laboratory study. METHODS: In vivo kinetics and kinematics of 42 healthy, athletic participants were measured to determine stratification of injury risk (ie, low, medium, and high) in 3 degrees of knee forces/moments (knee abduction moment, anterior tibial shear, and internal tibial rotation). These stratified kinetic values were input into a cadaveric impact simulator to assess ligamentous strain and knee kinetics during a simulated landing task. Uniaxial and multiaxial load cells and implanted strain sensors were used to collect mechanical data for analysis. LDA was used to determine the ability to classify injury outcome by demographic and biomechanical input variables. RESULTS: From LDA, a 5-factor model (Entropy R2 = 0.26) demonstrated an area under the receiver operating characteristic curve (AUC) for all 5 injury outcomes (ACL, MCL, ACL+MCL, ACL+MCL+meniscus, ACL+meniscus) of 0.74 or higher, with "good" prediction for 4 of 5 injury classifications. A 10-factor model (Entropy R2 = 0.66) improved the AUC to 0.86 or higher, with "excellent" prediction for 5 injury classifications. The 15-factor model (Entropy R2 = 0.85), produced 94.1% accuracy with the AUC 0.98 or higher for all 5 injury classifications. CONCLUSION: Use of LDA accurately predicted the outcome of knee injury from kinetic data from cadaveric simulations with the use of a mechanical impact simulator at 25° of knee flexion. Thus, with clinically relevant kinetics, it is possible to determine clinical risk of injury and also the likely presentation of singular or concomitant knee injury. CLINICAL RELEVANCE: LDA demonstrates that injury outcomes are largely characterized by specific mechanics that can distinguish ACL, MCL, and medial meniscal injury. Furthermore, as the mechanics of injury are better understood, improved interventional prehabilitation can be designed to reduce these injuries.

来源:Am J Sports Med,查看原文。版权归原作者所有。

引用

  1. Schilaty ND, Bates NA, Kruisselbrink S, et al. Linear Discriminant Analysis Successfully Predicts Knee Injury Outcome From Biomechanical Variables. Am J Sports Med. 2020. PMID: 32693617. doi:10.1177/0363546520939946

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。