经过验证的膝关节前向求解动力学数学模型:能否成为植入物评估的有效替代方法?
本研究开发并验证了一个12自由度人体膝关节前向求解动力学数学模型,包含整个下肢及膝关节主要肌肉和韧带。模型通过遥测植入物和透视进行验证,预测胫股关节力的平均精度为0.14倍体重(外侧)、0.13倍体重(内侧)和0.17倍体重(总力)的均方根误差。结果表明,经过验证的数学模型可用于预测部件设计和手术条件对全膝关节置换术(TKA)结局的影响。
要点
- 模型预测胫股关节力的平均精度为0.14倍体重(外侧)、0.13倍体重(内侧)和0.17倍体重(总力)的均方根误差。
- 透视验证的运动学平均精度为0.44毫米(外侧前后位置)、0.62毫米(内侧前后位置)和0.77(轴向旋转)的均方根误差。
- 增加内侧一致性可减少中屈曲期的矛盾性前滑;增加后倾角使股骨接触点更靠后并降低后交叉韧带张力。
核心结论
- 开发并验证了一个膝关节前向求解动力学模型,结果表明经过验证的数学模型可用于预测部件设计和手术条件对TKA结局的影响。
研究设计与样本
- 开发了一个12自由度人体膝关节数学模型,包含整个下肢及膝关节主要肌肉和韧带,肌肉力通过比例-积分-微分控制器计算,关节力通过接触检测算法计算。
- 模型通过遥测植入物和透视进行验证,并进行了敏感性分析以确定模型对植入物设计(改变聚乙烯内侧一致性)和手术对线(改变胫骨后倾)的敏感性。
主要发现
- 模型预测胫股关节力的平均精度为0.14倍体重(外侧)、0.13倍体重(内侧)和0.17倍体重(总力)的均方根误差。
- 透视验证的运动学平均精度为0.44毫米(外侧前后位置)、0.62毫米(内侧前后位置)和0.77(轴向旋转)的均方根误差。
- 增加内侧一致性导致中屈曲期矛盾性前滑减少。
- 增加胫骨后倾使股骨接触点在衬垫上更靠后,并降低后交叉韧带张力。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Mathematical modeling is among the most common computational tools for assessing total knee arthroplasty (TKA) mechanics of different implant designs and surgical alignments. The main objective of this study is to describe and validate a forward solution mathematical of the knee joint to investigate the effects of TKA design and surgical conditions on TKA outcomes. METHODS: A 12-degree of freedom mathematical model of the human knee was developed. This model includes the whole lower extremity of the human body and comprises major muscles and ligaments at the knee joint. The muscle forces are computed using a proportional-integral-derivative controller, and the joint forces are calculated using a contact detection algorithm. The model was validated using telemetric implants and fluoroscopy, and the sensitivity analyses were performed to determine how sensitive the model is to both implant design, which was analyzed by varying medial conformity of the polyethylene, and surgical alignment, which was analyzed by varying the posterior tibial tilt. RESULTS: The model predicted the tibiofemoral joint forces with an average accuracy of 0.14× body weight (BW), 0.13× BW, and 0.17× BW root-mean-square errors for lateral, medial, and total tibiofemoral contact forces. With fluoroscopy, the kinematics were validated with an average accuracy of 0.44 mm, 0.62 mm, and 0.77 root-mean-square errors for lateral anteroposterior position, medial anteroposterior position, and axial rotation, respectively. Increasing medial conformity resulted in reducing the paradoxical anterior sliding midflexion. Furthermore, increasing posterior tibial slopes shifted the femoral contact point more posterior on the bearing and reduced the tension in the posterior cruciate ligament. CONCLUSION: A forward solution dynamics model of the knee joint was developed and validated using telemetry devices and fluoroscopy data. The results of this study suggest that a validated mathematical model can be used to predict the effects of component design and surgical conditions on TKA outcomes.
引用
- Khasian M, Meccia BA, LaCour MT, et al. A Validated Forward Solution Dynamics Mathematical Model of the Knee Joint: Can It Be an Effective Alternative for Implant Evaluation? J Arthroplasty. 2020. PMID: 32631725. doi:10.1016/j.arth.2020.06.017
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。