第一代与第二代交联及常规回收植入物的体内性能特征比较
本研究比较常规与交联回收植入物的化学、形态学和微观力学体内性能,采用光学损伤评分、傅里叶变换红外光谱、差示扫描量热法和深度传感压痕技术测量,并将氧化指数、结晶度、弹性模量和硬度进行关联。结果显示制造工艺直接影响体内性能,第二代交联回收植入物弹性模量和硬度值优于其他类型且最不易氧化。作者认为混合制造技术可使回收植入物体内性能受益。
要点
- 常规回收植入物在无热处理和空气环境伽马射线灭菌条件下更易氧化,但结晶度和弹性模量值更高。
- 第一代交联回收植入物引入热处理步骤降低了氧化敏感性但降解了结晶结构,采用中等总交联辐照剂量并结合重熔和退火热处理的植入物为例外。
- 第二代交联回收植入物弹性模量和硬度值总体上优于其他所有类型植入物,且最不易氧化。
核心结论
- 结果表明回收植入物的体内性能可能受益于混合超高分子量聚乙烯(UHMWPE)植入物制造技术,如中等交联辐照剂量、重熔后退火以及环氧乙烷或气体等离子体灭菌。
研究设计与样本
- 本研究旨在比较常规与交联回收植入物的化学、形态学和微观力学体内性能,采用光学损伤评分、傅里叶变换红外光谱、差示扫描量热法和深度传感压痕技术进行测量。
主要发现
- 不同制造工艺直接影响植入物的体内性能。
- 常规回收植入物在无热处理和空气环境伽马射线灭菌条件下更易氧化,而它们具有更高的结晶度和弹性模量值。
- 向第一代交联回收植入物引入热处理步骤降低了氧化敏感性但降解了结晶结构,然而,采用中等总交联辐照剂量并结合重熔和退火两种热处理方法的此类植入物为例外。
- 第二代交联回收植入物总体上具有远优于其他所有类型植入物的弹性模量即硬度值,且最不易氧化。
关键数值与推荐
- 测量结果用于关联氧化指数、结晶度、弹性模量和硬度。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Implants made of ultra high molecular weight polyethylene (UHMWPE) has been used for almost 60 years in hip joint arthroplasty as articulating surface. UHMWPE implants have evolved over time from conventional to cross-linked implants. Chemical, morphologic, and micromechanical characteristics play important roles in overall in vivo performance. METHODS: This study aimed at comparing chemical, morphologic, and micromechanical in vivo performance characteristics of conventional and cross-linked explants. Optical damage scoring, Fourier transform infrared spectroscopy, differential scanning calorimetry, and depth sensing indentation techniques were used for the measurements. The measurement results were used to correlate oxidation index, degree of crystallinity, E-Modulus, and hardness. RESULTS: Different manufacturing processes directly affect implants' in vivo performance. Conventional explants are more susceptible to oxidation in the absence of thermal treatment and air ambient gamma irradiation sterilization, whereas they have higher degree of crystallinity and E-Modulus values. Introduction of a thermal treatment step to first-generation cross-linked explants has decreased the oxidation susceptibility but degraded the crystalline structure however, such explants manufactured with moderate total cross-linking irradiation dose and a combination of both remelting and annealing thermal treatment methods are the exceptions. The second-generation cross-linked explants in general have much better E-Modulus, that is, hardness values over all other types of explants and are least susceptible to oxidation. CONCLUSION: The results suggest that in vivo performances of explants could benefit from the hybrid UHMWPE implant manufacturing techniques, such as moderate cross-linking irradiation doses, remelting, followed by annealing and ethylene oxide or gas plasma sterilization.
引用
- Ors-Unsal A, Archodoulaki VM. Comparison of In-Vivo Performance Characteristics of First-Generation and Second-Generation Cross-Linked and Conventional Explants. J Arthroplasty. 2020. PMID: 32631726. doi:10.1016/j.arth.2020.06.012
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。