文献速递关节外科

全膝关节置换术中尖端摆动锯片与轮毂摆动锯片控制能力的比较

Comparison of Tip- Versus Hub-Oscillating Saw Blade Control in a Total Knee Arthroplasty Model.
PubMed 文献 · J Arthroplasty · 2020-06-15

研究通过16名不同经验水平的参与者在复合胫骨骨模型上进行截骨,比较传统轮毂摆动锯片与新型尖端摆动锯片的胫骨后侧锯片突入深度及主观控制感受。结果显示锯片设计与手术经验水平对后侧突入深度无显著差异(P > .05),但经验较少的参与者认为尖端摆动锯片更易使用和控制(P = .0163)。结论认为尖端摆动锯片并未改变胫骨后侧锯片突入的风险。

要点

  • 锯片设计与经验水平对胫骨后侧锯片突入深度无显著差异(P > .05)。
  • 无锯片使用经验的受试者在后续截骨中后侧突入深度显著减少。
  • 经验较少的参与者认为尖端摆动锯片更易使用和控制(P = .0163)。

核心结论

  • 与传统锯片相比,尖端摆动锯片并未改变胫骨后侧锯片突入的风险。

研究设计与样本

  • 研究纳入16名不同经验水平的参与者,在复合胫骨骨模型上进行截骨并录像测量后侧锯片突入深度,同时调查主观控制感受与偏好。

主要发现

  • 锯片设计与手术经验水平对后侧锯片突入深度无显著差异(P > .05)。
  • 无论锯片设计如何,无锯片使用经验的受试者在后续截骨中后侧胫骨突入深度显著减少。
  • 经验较少的参与者认为尖端摆动锯片更易使用和控制(P = .0163)。

关键数值与推荐

  • 尖端摆动锯片组与轮毂摆动锯片组在后侧锯片突入深度上无显著差异(P > .05)。
  • 经验较少的参与者对尖端摆动锯片易用性和控制性的主观评分显著优于传统锯片(P = .0163)。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Oscillating saws are commonly used for bone preparation in total knee arthroplasty but can cause injury to the posterior neurovascular bundle during tibial resection. Tip-oscillating saw blades are a recent innovation that could improve saw control due to decreased excursion; however, the tactile feedback to the surgeon is different. METHODS: To compare traditional hub and new tip-oscillating saw blades, 16 participants of varying levels of experience were video-recorded during composite tibial bone model resections to measure posterior saw blade plunge. Subjective perceptions of saw control and preference were also surveyed. RESULTS: Saw blade design and level of surgical experience did not produce a significant difference in posterior saw blade plunge (P > .05). Independent of saw blade design, subjects with no previous saw experience had significantly decreased posterior tibial plunge over subsequent resections. Tip-oscillating saw blades were perceived to be easier to use and control by less experienced participants (P = .0163). CONCLUSION: Tip-oscillating saw blades do not alter the risk of posterior tibial saw plunge compared with traditional saw blades.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Christensen DD, Beynnon BD, Daniels SD, et al. Comparison of Tip- Versus Hub-Oscillating Saw Blade Control in a Total Knee Arthroplasty Model. J Arthroplasty. 2020. PMID: 32631728. doi:10.1016/j.arth.2020.06.019

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。