金属对聚乙烯全髋关节置换翻修率趋势及与陶瓷对聚乙烯的10年随访比较
结果显示COP翻修发生率为3.8%,MOP为4.3%;脱位是最常见翻修原因(MOP 23.5%,COP 24.8%);
要点
- 脱位是MOP和COP最常见的翻修原因(分别为23.5%和24.8%)。
核心结论
- 金属头的腐蚀担忧在长达10年随访中并未导致MOP翻修风险显著升高。
- 与其他机制相比,腐蚀似乎不是翻修的主要原因。
研究设计与样本
- 采用log-rank和Wilcoxon检验评估MOP短期翻修风险的时间变化趋势。
主要发现
- COP翻修发生率为3.8%,MOP为4.3%。
- 脱位是最常见翻修原因(MOP:23.5%;COP:24.8%)。
关键数值与推荐
- 翻修发生率:COP 3.8%,MOP 4.3%。
- 翻修原因中脱位占比:MOP 23.5%,COP 24.8%。
临床怎么用
- 在长达10年随访中,MOP全髋关节置换的翻修风险与COP无显著差异,金属头腐蚀担忧不应成为选择MOP的主要障碍。
- 临床应关注脱位作为MOP和COP最常见的翻修原因。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: We compared the revision risk between metal-on-polyethylene (MOP) and ceramic-on-polyethylene (COP) total hip arthroplasty patients and evaluated temporal changes in short-term revision risks for MOP patients. METHODS: Primary MOP (n = 9480) and COP (n = 3620) total hip arthroplasties were evaluated from the Medicare data set (October 2005 to December 2015) for revision risk, with up to 10 years of follow-up using multivariate analysis. Temporal change in the short-term revision risk for MOP was evaluated (log-rank and Wilcoxon tests). RESULTS: Revision incidence was 3.8% for COP and 4.3% for MOP. MOP short-term revision risk did not change over time (P ≥ .844 at 1 year and .627 at 2 years). Dislocation was the most common reason for revision (MOP: 23.5%; COP: 24.8%). Overall adjusted revision risks were not different between MOP and COP up to 10 years of follow-up (P ≥ .181). CONCLUSIONS: Concerns with corrosion for metal heads do not appear to result in significantly elevated revision risk for MOP at up to 10 years. Corrosion does not appear as a primary reason for revision compared to other mechanisms.
引用
- Ong KL, Richards JA, Lau EC, et al. Corrosion Concerns? Trends in Metal-on-Polyethylene Total Hip Arthroplasty Revision Rates and Comparisons Against Ceramic-on-Polyethylene up to 10 Years of Follow-Up. J Arthroplasty. 2020. PMID: 32475785. doi:10.1016/j.arth.2020.05.007
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。