3D打印干骺端锥在翻修全膝关节置换术中两年留存率优异
本研究回顾性分析了2015至2016年间142例翻修全膝关节置换术(TKA)中使用的202个新型多孔3D打印钛合金干骺端锥(134胫骨、68股骨),多数用于Type 2B或3骨缺损。结果显示,无菌性松动导致的锥体翻修留存率为100%,任何锥体翻修留存率为98%,无任何翻修和再手术留存率分别为90%和83%,KSS显著改善。
要点
- 3D打印钛合金干骺端锥在严重骨缺损翻修TKA中早期留存率优异。
- 无菌性松动翻修留存率100%,任何锥体翻修留存率98%。
- KSS从术前50显著改善至87(p < 0.001)。
核心结论
- 新型3D打印钛合金干骺端锥配合铰刀系统在严重骨缺损的困难翻修TKA中早期留存率优异且并发症少。
研究设计与样本
- 回顾性系列研究,纳入2015至2016年间142例翻修TKA(139例患者)使用的202个锥体(134胫骨、68股骨),平均随访2.4年(2至3.6年)。
主要发现
- 无菌性松动导致锥体翻修留存率为100%,任何锥体翻修留存率为98%。
- 无任何翻修留存率为90%,无任何再手术留存率为83%。
- 5个锥体被翻修:3例感染、1例假体周围骨折、1例无菌性胫骨松动。
- 影像学上3个未翻修股骨锥在铰链式假体存在下表现为松动,其余锥体稳定;所有锥体松动均发生于Type 2B或3骨缺损患者。
- KSS从术前平均50(0至94)显著改善至87(72至94)(p < 0.001)。
关键数值与推荐
- 锥体无菌性松动翻修留存率100%,任何锥体翻修留存率98%。
- 无任何翻修留存率90%,无任何再手术留存率83%。
- 平均KSS从术前50改善至87(p < 0.001)。
临床怎么用
- 对于严重骨缺损(Type 2B或3)的翻修TKA,可考虑使用新型3D打印钛合金干骺端锥配合铰刀系统。
局限性
- 回顾性设计,平均随访仅2.4年,缺乏长期结果。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: Metaphyseal fixation during revision total knee arthroplasty (TKA) is important, but potentially difficult when using historical designs of cone. Material and manufacturing innovations have improved the size and shape of the cones which are available, and simplified the required bone preparation. In a large series, we assessed the implant survivorship, radiological results, and clinical outcomes of new porous 3D-printed titanium metaphyseal cones featuring a reamer-based system. METHODS: We reviewed 142 revision TKAs in 139 patients using 202 cones (134 tibial, 68 femoral) which were undertaken between 2015 and 2016. A total of 60 involved tibial and femoral cones. Most cones (149 of 202; 74%) were used for Type 2B or 3 bone loss. The mean age of the patients was 66 years (44 to 88), and 76 (55 %) were female. The mean body mass index (BMI) was 34 kg/m2 (18 to 60). The patients had a mean of 2.4 (1 to 8) previous operations on the knee, and 68 (48%) had a history of prosthetic infection. The mean follow-up was 2.4 years (2 to 3.6). RESULTS: Survivorship free of cone revision for aseptic loosening was 100% and survivorship free of any cone revision was 98%. Survivorships free of any revision and any reoperation were 90% and 83%, respectively. Five cones were revised: three for infection, one for periprosthetic fracture, and one for aseptic tibial loosening. Radiologically, three unrevised femoral cones appeared loose in the presence of hinged implants, while the remaining cones appeared stable. All cases of cone loosening occurred in patients with Type 2B or 3 defects. The mean Knee Society score (KSS) improved significantly from 50 (0 to 94) preoperatively to 87 (72 to 94) (p < 0.001). Three intraoperative fractures with cone impaction (two femoral, one tibial) healed uneventfully. CONCLUSION: Novel 3D-printed titanium cones, with a reamer-based system, yielded excellent early survivorship and few complications in patients with severe bone loss undergoing difficult revision TKA. The diversity of cone options, relative ease of preparation, and outcomes rivalling those of previous designs of cone support their continued use. Cite this article: Bone Joint J 2020;102-B(6 Supple A):107-115.
引用
- Tetreault MW, Perry KI, Pagnano MW, et al. Excellent two-year survivorship of 3D-printed metaphyseal cones in revision total knee arthroplasty. Bone Joint J. 2020. PMID: 32475272. doi:10.1302/0301-620X.102B6.BJJ-2019-1544.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。