利用人口统计学变量预测全膝关节置换术假体尺寸
该回顾性注册研究纳入8100例初次全膝关节置换术,使用多变量线性回归和贝叶斯模型分析身高、体重、性别与假体尺寸的关系。身高与股骨假体前后径(ρ=0.73)和胫骨假体内外径(ρ=0.77)相关性较强,线性模型股骨R²=0.607、胫骨R²=0.695。贝叶斯模型在5%误差容忍度下预测股骨和胫骨假体尺寸范围的准确率分别为94.4%和96.6%。
要点
- 身高与假体尺寸相关性较强,体重相关性中等,性别亦显著相关。
- 线性回归模型股骨R²=0.607、胫骨R²=0.695,均p<0.001。
- 贝叶斯模型5%误差容忍度下预测准确率股骨94.4%、胫骨96.6%。
核心结论
- 假体尺寸与身高、体重和性别等基本人口统计学变量相关。
- 线性回归和贝叶斯模型仅基于身高、体重和性别即可准确预测多家制造商的所需假体尺寸。
- 此类预测模型可能有助于提高手术室和植入物供应链效率。
研究设计与样本
- 平均年龄67.3岁(SD 9.5),平均BMI 30.4 kg/m2(SD 6.3)。
- 随机分为训练队列(n=4,022)和测试队列(n=4,078),在训练队列建立多变量线性回归模型和贝叶斯模型并应用于测试队列。
主要发现
- 身高与股骨假体前后径(AP)Pearson相关系数ρ=0.73(p<0.001),与胫骨假体内外径(ML)ρ=0.77(p<0.001)。
- 体重与股骨假体AP ρ=0.46(p<0.001),与胫骨假体ML ρ=0.48(p<0.001)。
- 身高、体重和性别与假体尺寸存在显著线性相关:股骨R²=0.607(p<0.001),胫骨R²=0.695(p<0.001)。
- 贝叶斯模型在5%误差容忍度下预测所需假体尺寸范围的准确率股骨为94.4%、胫骨为96.6%。
关键数值与推荐
- 贝叶斯模型在1%、5%、10%误差容忍度下评估预测准确率,其中5%容忍度下股骨准确率94.4%、胫骨96.6%。
- 线性回归模型股骨R²=0.607(p<0.001),胫骨R²=0.695(p<0.001)。
临床怎么用
- 可基于患者身高、体重和性别术前预测假体尺寸范围,辅助手术室备货和植入物供应链管理。
局限性
- 证据等级为Level IV。
- 原文未报告其他局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: The purpose of this investigation was to determine the relationship between height, weight, and sex with implant size in total knee arthroplasty (TKA) using a multivariate linear regression model and a Bayesian model. METHODS: A retrospective review of an institutional registry was performed of primary TKAs performed between January 2005 and December 2016. Patient demographics including patient age, sex, height, weight, and body mass index (BMI) were obtained from registry and medical record review. In total, 8,100 primary TKAs were included. The mean age was 67.3 years (SD 9.5) with a mean BMI of 30.4 kg/m2 (SD 6.3). The TKAs were randomly split into a training cohort (n = 4,022) and a testing cohort (n = 4,078). A multivariate linear regression model was created on the training cohort and then applied to the testing cohort . A Bayesian model was created based on the frequencies of implant sizes in the training cohort. The model was then applied to the testing cohort to determine the accuracy of the model at 1%, 5%, and 10% tolerance of inaccuracy. RESULTS: Height had a relatively strong correlation with implant size (femoral component anteroposterior (AP) Pearson correlation coefficient (ρ) = 0.73, p < 0.001; tibial component mediolateral (ML) ρ = 0.77, p < 0.001). Weight had a moderately strong correlation with implant size, (femoral component AP ρ = 0.46, p < 0.001; tibial ML ρ = 0.48, p < 0.001). There was a significant linear correlation with height, weight, and sex with implant size (femoral component R2 = 0.607, p < 0.001; tibial R2 = 0.695, p < 0.001). The Bayesian model showed high accuracy in predicting the range of required implant sizes (94.4% for the femur and 96.6% for the tibia) accepting a 5% risk of inaccuracy. CONCLUSION: Implant size was correlated with basic demographic variables including height, weight, and sex. The linear regression and Bayesian models accurately predicted required implant sizes across multiple manufacturers based on height, weight, and sex alone. These types of predictive models may help improve operating room and implant supply chain efficiency. Level of Evidence: Level IV Cite this article: Bone Joint J 2020;102-B(6 Supple A):85-90.
引用
- Blevins JL, Rao V, Chiu YF, et al. Predicting implant size in total knee arthroplasty using demographic variables. Bone Joint J. 2020. PMID: 32475285. doi:10.1302/0301-620X.102B6.BJJ-2019-1620.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。