文献速递运动医学关节外科创伤骨科

盂肱韧带的定量与定性解剖学研究

Quantitative and Qualitative Analyses of the Glenohumeral Ligaments: An Anatomic Study.
PubMed 文献 · Am J Sports Med · 2020-05-22

该研究采用10具非配对新鲜冷冻人体尸体肩关节,使用三维坐标测量装置定量描述盂肱韧带在肱骨和盂肱盂唇的附着点及其与骨性标志的关系。结果显示各韧带附着长度和时钟面范围存在一定变异,但肱骨头软骨面、肱二头肌沟和时钟面可作为术中解剖修复的可靠标志。

要点

  • 盂肱韧带附着点可用肱骨头软骨缘和盂唇作为术中定位标志。
  • 上盂肱韧带肱骨附着长度9.5±3.2 mm,盂唇附着在盂唇最外侧缘内侧1.9±1.2 mm。
  • 中盂肱韧带肱骨附着长度16.4±3.0 mm,对应时钟面2:10至3:35。

核心结论

  • 盂肱韧带在所有标本中均可一致识别,上、中、前下和后下盂肱韧带存在轻微解剖变异。
  • 肱骨头软骨面、肱二头肌沟和时钟面可作为术中解剖修复这些结构的可靠标志。

研究设计与样本

  • 描述性实验室研究,纳入10具非配对新鲜冷冻人体尸体肩关节。
  • 使用三维坐标测量装置量化骨性标志和软组织附着区域的位置。
  • 去除所有皮下组织和肌肉,保留肩袖(肌腹在肌腱交界处切断)和肱二头肌长头腱,然后切断上、中、前下、后下盂肱韧带及喙肱韧带。

主要发现

  • 上盂肱韧带肱骨附着沿关节内软骨缘平均长度9.5±3.2 mm,范围12:55至1:40;盂唇附着在盂唇最外侧缘内侧1.9±1.2 mm,范围12:30至12:45。
  • 中盂肱韧带肱骨附着沿关节内软骨缘平均长度16.4±3.0 mm,对应肱骨头时钟面2:10至3:35;盂唇附着与盂唇融合,在盂唇最外侧缘内侧1.5±1.0 mm,对应盂肱时钟面1:50至2:35。
  • 前下盂肱韧带肱骨附着沿关节内软骨缘平均长度12.0±3.0 mm,范围4:05至5:10;盂肱颈骨性足印48.4±24.5 mm²;盂唇融合附着在盂唇最外侧缘内侧1.2±0.9 mm,对应盂肱时钟面3:30至4:05。
  • 后下盂肱韧带肱骨附着沿关节内软骨缘平均长度12.0±1.4 mm,范围7:40至8:50;盂唇附着在盂唇最外侧缘内侧1.2±0.5 mm,对应盂肱时钟面7:35至8:50。
  • 喙肱韧带起点从喙突的平均长度12.9 mm,其最前点位于喙突尖平均14.1 mm处;肱骨附着沿关节内软骨缘平均长度10.0±4.0 mm,范围11:55至12:40。

关键数值与推荐

  • 上盂肱韧带肱骨附着长度9.5±3.2 mm,盂唇附着内移1.9±1.2 mm。
  • 中盂肱韧带肱骨附着长度16.4±3.0 mm,盂唇附着内移1.5±1.0 mm。
  • 前下盂肱韧带肱骨附着长度12.0±3.0 mm,盂肱颈骨性足印48.4±24.5 mm²,盂唇附着内移1.2±0.9 mm。
  • 后下盂肱韧带肱骨附着长度12.0±1.4 mm,盂唇附着内移1.2±0.5 mm。
  • 喙肱韧带喙突起点长度12.9 mm,最前点距喙突尖14.1 mm,肱骨附着长度10.0±4.0 mm。

临床怎么用

  • 在开放或关节镜下肩关节手术中,可利用肱骨头软骨面、肱二头肌沟和时钟面作为解剖标志定位盂肱韧带附着点。
  • 这些定量数据有助于实现盂肱韧带静态稳定结构的解剖修复,以优化肩关节功能并预防复发性不稳。

局限性

  • 研究为描述性实验室研究,样本量较小(10具尸体肩关节),可能无法完全反映活体解剖变异。
  • 标本为非配对设计,未评估左右侧或个体间差异。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: While several studies have qualitatively described the anatomy of the glenohumeral ligaments, there remains a lack of consensus regarding their quantitative humeral and glenoid attachment sites. PURPOSE: To quantitatively and qualitatively describe the anatomic humeral and glenoid attachment sites of the glenohumeral ligaments and their relationship to well-established anatomic landmarks. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 10 nonpaired, fresh-frozen human cadaveric shoulders were included in this study. A 3-dimensional coordinate measuring device was used to quantify the location of pertinent bony landmarks and soft tissue attachment areas. All subcutaneous tissues and musculature were removed, with the exception of the rotator cuff (respective muscle bellies cut at their musculotendinous junctions) and the long head of the biceps tendon. The superior glenohumeral ligament (SGHL), middle glenohumeral ligament (MGHL), anteroinferior glenohumeral ligament (AIGHL), posteroinferior glenohumeral ligament (PIGHL), and coracohumeral ligament (CHL) were then transected. Coordinates of points along the perimeters of attachment sites were used to calculate areas, while coordinates of center points were used to determine distances between surgically relevant attachment sites and pertinent bony landmarks. RESULTS: The mean length of the SGHL humeral attachment along the intra-articular cartilage margin was 9.5 ± 3.2 mm, spanning from 12:55 to 1:40, while the SGHL glenoid attachment to the labrum was 1.9 ± 1.2 mm medial to the most lateral extent of the labral rim, spanning from 12:30 to 12:45. The mean length of the MGHL attachment along the intra-articular cartilage margin was 16.4 ± 3.0 mm, equating to 2:10 to 3:35 on the humeral head clockface, and the glenoid attachment was confluent with the labrum, attaching 1.5 ± 1.0 mm medial to the most lateral extent of the labral rim and thus extending from 1:50 to 2:35 on the glenoid clockface. The mean length of the AIGHL attachment along the intra-articular cartilage margin was 12.0 ± 3.0 mm, spanning from 4:05 to 5:10 on the humeral head clockface. The AIGHL bony footprint on the glenoid neck was 48.4 ± 24.5 mm2. The confluent attachment of the AIGHL to the labrum was 1.2 ± 0.9 mm medial to the most lateral extent of the labral rim, corresponding to 3:30 to 4:05 on the glenoid clockface. The mean length of the PIGHL attachment along the intra-articular cartilage margin was 12.0 ± 1.4 mm, spanning from 7:40 to 8:50 on the humeral head clockface. The PIGHL attachment to the labrum was 1.2 ± 0.5 mm medial to the most lateral extent of the labral rim. This attachment to the labrum was calculated to span from 7:35 to 8:50 on the glenoid clockface. The mean length of the CHL origin from the coracoid was 12.9 mm, with its most anterior point located a mean of 14.1 mm from the tip of the coracoid. The mean length of the CHL attachment along the intra-articular cartilage margin was 10.0 ± 4.0 mm, spanning from 11:55 to 12:40 on the humeral head clockface. CONCLUSION: Glenohumeral ligaments were consistently identified in all specimens with minor anatomic variability for the SGHL, MGHL, AIGHL, and PIGHL. Important landmarks including the cartilage surface of the humerus, the bicipital groove, and the clockface can be utilized intraoperatively when attempting anatomic repair of these structures. CLINICAL RELEVANCE: There are multiple open and arthroscopic shoulder procedures that rely on anatomic restoration of these static stabilizers to provide optimal shoulder function and prevent recurrent instability. The qualitative descriptions are comparable with current literature; however, this study is the first to quantify the glenohumeral capsular and ligamentous attachments. The data provided allow for reliable landmarks to be established from known bony and soft tissue structures.

来源:Am J Sports Med,查看原文。版权归原作者所有。

引用

  1. Dekker TJ, Aman ZS, Peebles LA, et al. Quantitative and Qualitative Analyses of the Glenohumeral Ligaments: An Anatomic Study. Am J Sports Med. 2020. PMID: 32441993. doi:10.1177/0363546520917665

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。