文献速递骨质疏松与代谢性骨病

HR-pQCT多堆栈下桡骨与胫骨骨强度的参考值及临床预测因素

Reference values and clinical predictors of bone strength for HR-pQCT-based distal radius and tibia strength assessments in women and men.
PubMed 文献 · Osteoporos Int · 2020-05-25

该研究在瑞士伯尔尼大学医院招募20-39岁健康男女,采用多堆栈高分辨率外周定量CT(HR-pQCT)结合均质有限元分析(hFE)估算桡骨与胫骨骨强度,建立性别特异性参考值,并分析临床预测因素。结果显示男性桡骨与胫骨骨强度均显著高于女性,性别与股骨颈面积骨密度(aBMD)是骨强度的独立预测因素。

要点

  • 建立了20-39岁健康男女桡骨与胫骨骨强度的性别特异性参考值。
  • 男性桡骨骨强度均值6640 N,女性4110 N;胫骨男性18200 N,女性11970 N,差异均显著。
  • 性别与股骨颈aBMD是骨强度的独立预测因素,其他临床指标未显示预测价值。

核心结论

  • 研究提供了基于多堆栈HR-pQCT与hFE分析的桡骨和胫骨骨强度参考值,为改进骨质疏松风险预测模型提供基础。
  • 股骨颈aBMD与性别是骨强度的显著预测因素。

研究设计与样本

  • 在伯尔尼大学医院招募20-39岁健康男女,进行访谈、临床检查(握力、步速、髋部DXA)及HR-pQCT扫描。
  • 非优势前臂采用双堆栈协议、胫骨采用三堆栈协议扫描,骨强度通过hFE分析估算,参考值用分位数回归计算。
  • 采用多变量分析识别骨强度的临床预测因素。

主要发现

  • 共纳入46名女性和41名男性,平均年龄分别为25.1岁(标准差5.0)和26.2岁(标准差5.2)。
  • 男性桡骨骨强度均值6640 N(标准差1800),女性4110 N(标准差1200),p<0.001。
  • 男性胫骨骨强度均值18200 N(标准差4220),女性11970 N(标准差3150),p<0.001。
  • 在含与不含全髋aBMD的两个多变量回归模型中,加入股骨颈aBMD均显著改善模型(p<0.001)。
  • 除性别和aBMD外,未识别出其他骨强度的临床预测因素。

关键数值与推荐

  • 男性桡骨骨强度均值6640 N(标准差1800),女性4110 N(标准差1200),p<0.001。
  • 男性胫骨骨强度均值18200 N(标准差4220),女性11970 N(标准差3150),p<0.001。
  • 加入股骨颈aBMD显著改善多变量模型,p<0.001。

临床怎么用

  • 可为20-39岁健康人群提供桡骨与胫骨骨强度的性别特异性参考值,用于临床解读。
  • 股骨颈aBMD与性别可作为骨强度评估的预测指标,辅助骨质疏松风险分层。

局限性

  • 原文未报告其他临床预测因素的具体分析结果。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

UNLABELLED: Reference values for radius and tibia strength using multiple-stack high-resolution peripheral quantitative computed tomography (HR-pQCT) with homogenized finite element analysis are presented in order to derive critical values improving risk prediction models of osteoporosis. Gender and femoral neck areal bone mineral density (aBMD) were independent predictors of bone strength. INTRODUCTION: The purpose was to obtain reference values for radius and tibia bone strength computed by using the homogenized finite element analysis (hFE) using multiple stacks with a HR-pQCT. METHODS: Male and female healthy participants aged 20-39 years were recruited at the University Hospital of Bern. They underwent interview and clinical examination including hand grip, gait speed and DXA of the hip. The nondominant forearm and tibia were scanned with a double and a triple-stack protocol, respectively, using HR-pQCT (XCT II, SCANCO Medical AG). Bone strength was estimated by using the hFE analysis, and reference values were calculated using quantile regression. Multivariable analyses were performed to identify clinical predictors of bone strength. RESULTS: Overall, 46 women and 41 men were recruited with mean ages of 25.1 (sd 5.0) and 26.2 (sd 5.2) years. Sex-specific reference values for bone strength were established. Men had significantly higher strength for radius (mean (sd) 6640 (1800) N vs. 4110 (1200) N; p < 0.001) and tibia (18,200 (4220) N vs. 11,970 (3150) N; p < 0.001) than women. In the two multivariable regression models with and without total hip aBMD, the addition of neck hip aBMD significantly improved the model (p < 0.001). No clinical predictors of bone strength other than gender and aBMD were identified. CONCLUSION: Reference values for radius and tibia strength using multiple HR-pQCT stacks with hFE analysis are presented and provide the basis to help refining accurate risk prediction models. Femoral neck aBMD and gender were significant predictors of bone strength.

来源:Osteoporos Int,查看原文。版权归原作者所有。

引用

  1. Stuck AK, Schenk D, Zysset P, et al. Reference values and clinical predictors of bone strength for HR-pQCT-based distal radius and tibia strength assessments in women and men. Osteoporos Int. 2020. PMID: 32451557. doi:10.1007/s00198-020-05405-0

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。