文献速递运动医学关节外科

三维生物打印支架联合人脐带血间充质干细胞促进兔慢性全层肩袖撕裂再生

A 3-Dimensional Bioprinted Scaffold With Human Umbilical Cord Blood-Mesenchymal Stem Cells Improves Regeneration of Chronic Full-Thickness Rotator Cuff Tear in a Rabbit Model.
PubMed 文献 · Am J Sports Med · 2020-01-01

该研究在兔慢性全层肩袖撕裂模型中,比较了三维生物打印支架联合人脐带血间充质干细胞(hUCB-MSCs)与单纯干细胞、单纯支架及生理盐水对照的再生效果。结果显示联合组在再生胶原纤维和运动功能方面优于单纯干细胞组和单纯支架组,但各组撕裂尺寸无显著差异。结论提示该组织工程策略可在不手术修复的情况下改善再生微环境。

要点

  • 三维生物打印支架联合hUCB-MSCs可促进慢性肩袖撕裂的胶原再生和运动功能恢复。
  • 联合组运动功能优于单纯干细胞组和单纯支架组,但撕裂尺寸无显著差异。
  • 该策略无需手术修复,可能通过增加细胞保留改善再生微环境。

核心结论

  • 基于三维生物打印支架填充hUCB-MSCs的组织工程策略可改善兔慢性全层肩袖撕裂的再生微环境,且无需手术修复。

研究设计与样本

  • controlled laboratory study,32只兔在肩胛上肌腱创建5-mm全层撕裂后6周随机分为4组,每组8只。
  • 四组分别移植生理盐水、hUCB-MSCs(0.2 mL,1×10^6)、无细胞三维生物打印构建体、含hUCB-MSCs(0.2 mL,1×10^6细胞)的三维生物打印构建体。
  • 所有兔在治疗后4周处死,进行大体形态学、组织学检查和运动分析。

主要发现

  • G4-3D+MSC组再生胶原1型纤维、步行距离、快速步行时间和平均步行速度均大于G2-MSC组。
  • 与G3-3D组相比,G4-3D+MSC组再生肌腱纤维更明显且运动分析参数更好。
  • G2-MSC、G3-3D和G4-3D+MSC组的大体撕裂尺寸无显著差异,但均较对照组G1-SAL显著减小。

临床怎么用

  • 对于慢性全层肩袖撕裂,三维生物打印支架联合hUCB-MSCs可能在不手术修复的情况下促进再生并增加细胞保留。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Chronic full-thickness rotator cuff tears (FTRCTs) represent a major clinical concern because they show highly compromised healing capacity. PURPOSE: To evaluate the efficacy of using a 3-dimensional (3D) bioprinted scaffold with human umbilical cord blood (hUCB)-mesenchymal stem cells (MSCs) for regeneration of chronic FTRCTs in a rabbit model. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 32 rabbits were randomly assigned to 4 treatment groups (n = 8 per group) at 6 weeks after a 5-mm FTRCT was created on the supraspinatus tendon. Group 1 (G1-SAL) was transplanted with normal saline. Group 2 (G2-MSC) was transplanted with hUCB-MSCs (0.2 mL, 1 × 106) into FTRCTs. Group 3 (G3-3D) was transplanted with a 3D bioprinted construct without MSCs, and group 4 (G4-3D+MSC) was transplanted with a 3D bioprinted construct containing hUCB-MSCs (0.2 mL, 1 × 106 cells) into FTRCTs. All 32 rabbits were euthanized at 4 weeks after treatment. Examination of gross morphologic changes and histologic results was performed on all rabbits after sacrifice. Motion analysis was also performed before and after treatment. RESULTS: In G4-3D+MSC, newly regenerated collagen type 1 fibers, walking distance, fast walking time, and mean walking speed were greater than those in G2-MSC based on histochemical and motion analyses. In addition, when compared with G3-3D, G4-3D+MSC showed more prominent regenerated tendon fibers and better parameters of motion analysis. However, there was no significant difference in gross tear size among G2-MSC, G3-3D, and G4-3D+MSC, although these groups showed significant decreases in tear size as compared with the control group (G1-SAL). CONCLUSION: Findings of this study show that a tissue engineering strategy based on a 3D bioprinted scaffold filled with hUCB-MSCs can improve the microenvironment for regenerative processes of FTRCT without any surgical repair. CLINICAL RELEVANCE: In the case of rotator cuff tear, the cell loss of the external MSCs can be increased by exposure to synovial fluid. Therefore, a 3D bioprinted scaffold in combination with MSCs without surgical repair may be effective in increasing cell retention in FTRCT.

来源:Am J Sports Med,查看原文。版权归原作者所有。

引用

  1. Rak Kwon D, Jung S, Jang J, et al. A 3-Dimensional Bioprinted Scaffold With Human Umbilical Cord Blood-Mesenchymal Stem Cells Improves Regeneration of Chronic Full-Thickness Rotator Cuff Tear in a Rabbit Model. Am J Sports Med. 2020. PMID: 32167836. doi:10.1177/0363546520904022

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。