亚洲患者非骨水泥组配式柄全髋关节置换的中期结局与骨溶解频率
本研究回顾373例(461髋)接受S-ROM-A组配式股骨柄初次全髋关节置换的亚洲患者,平均随访6.8年,评估临床评分与假体生存率。结果显示5年和10年柄生存率分别为100%和84%,骨溶解在金属对金属组(42.8%)和金属对聚乙烯组(15.8%)发生,杯外倾角较低与骨溶解显著相关。
要点
- S-ROM-A组配式柄在解剖困难病例中中期固定优良,5年生存率100%,10年84%。
- 金属对金属和金属对聚乙烯磨损界面骨溶解发生率分别为42.8%和15.8%。
- 较低的髋臼杯外倾角与骨溶解风险显著相关(OR 0.914)。
核心结论
- S-ROM-A股骨假体在严重畸形初次全髋关节置换中中期固定优良,组配系统实用。
- 磨损界面可能与金属碎屑不良反应相关,陶瓷对聚乙烯界面或为解剖困难病例的选择。
研究设计与样本
- 回顾性队列研究,纳入373例(461髋)接受非骨水泥初次全髋关节置换的亚洲患者,平均年龄58岁。
- 临床评估采用改良Merle d'Aubigné-Postel评分,以任何原因翻修为终点计算Kaplan-Meier生存率。
- 影像学分析纳入随访≥5年的331例(412髋),进行X线和多平面CT检查。
主要发现
- 无术后脱位或深部感染发生。
- 改良Merle d'Aubigné-Postel评分从术前10.9分显著提高至末次随访16.7分(P < .001)。
- 5年和10年累积柄生存率分别为100%和84%(95%CI 75%-93%)。
- 所有柄均分类为骨长入固定。
- 骨溶解发生率在金属对金属组为42.8%,金属对聚乙烯组为15.8%;平均发生时间约3年,三组间无显著差异(P = .264)。
关键数值与推荐
- 5年和10年累积柄生存率分别为100%和84%(95%CI 75%-93%)。
- 改良Merle d'Aubigné-Postel评分术前10.9分,末次随访16.7分(P < .001)。
- 骨溶解发生率:金属对金属组42.8%,金属对聚乙烯组15.8%。
- 杯外倾角与骨溶解的OR为0.914(95%CI 0.84-0.99;P = .029)。
临床怎么用
- 对于解剖困难的初次全髋关节置换,S-ROM-A组配式柄可提供优良的中期固定。
- 应关注磨损界面相关的金属碎屑不良反应,陶瓷对聚乙烯界面可考虑用于解剖困难病例。
- 术中注意髋臼杯外倾角,较低外倾角可能与骨溶解风险增加相关。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Modular stems are useful for total hip arthroplasty (THA) in anatomically difficult dysplasia. Here, we present mean 6.8-year outcomes of cementless primary THA using S-ROM-A (modified modular stem for Asian patients) femoral prosthesis in anatomically difficult cases. METHODS: Charts of 373 patients (461 hips) undergoing THA (mean age, 58 years) were reviewed for clinical evaluation of modified Merle d'Aubigné-Postel score and Kaplan-Meier survivorship with revision for any reason as the end point. For radiographic analysis, 331 patients (412 hips) followed up for ≥5 years were included. Bearing couples were metal-on-metal (n = 145), metal-on-polyethylene (n = 120), and ceramic-on-polyethylene (n = 147). Radiography and multiplanar computed tomography were performed. RESULTS: No postoperative dislocation or deep infection occurred. Mean modified Merle d'Aubigné-Postel score improved significantly (10.9 points preoperatively, 16.7 points at last follow-up; P < .001). Cumulative 5- and 10-year stem survival rates were 100% and 84%, respectively (95% confidence interval, 75%-93%). All stems were classified as bone ingrown fixation. Osteolysis occurred in metal-on-metal (42.8%) and metal-on-polyethylene (15.8%) groups. Mean time to osteolysis was ~3 years, with no significant difference between 3 groups (P = .264). In logistic regression, lower cup inclination angle was significantly associated with osteolysis (odds ratio, 0.914; 95% confidence interval, 0.84-0.99; P = .029). CONCLUSION: S-ROM-A femoral prosthesis achieved excellent midterm fixation, and the modular system was useful in primary THA with severe deformity. Bearing couples are potentially associated with adverse reactions to metal debris. S-ROM-A with ceramic-on-polyethylene bearing couples may be an option for anatomically difficult THA.
引用
- Sato A, Okuda N, Tsukada S, et al. Midterm Outcomes and Frequency of Osteolysis of Total Hip Arthroplasty Using Cementless Modular Stem for Asian Patients. J Arthroplasty. 2019. PMID: 31685396. doi:10.1016/j.arth.2019.10.018
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。