冠状面力线对内轴型固定平台单髁置换翻修的影响
本研究比较了功能良好的内轴型固定平台单髁置换(UKA)与因外侧间室骨关节炎进展或无菌性松动/下沉而翻修的UKA的术后机械力线。结果显示,翻修组力线分别偏向过度外翻或过度内翻,而功能良好组呈现约4°的轻度内翻。
要点
- 功能良好的UKA在10年随访时平均机械力线为约4°内翻。
- 因骨关节炎进展翻修者平均力线偏向更外翻(0.3°外翻)。
- 因松动或下沉翻修者平均力线偏向更内翻(6.1°内翻)。
核心结论
- 功能良好的内轴型固定平台UKA在10年时表现为约4°的轻度内翻机械力线。
- 因外侧间室骨关节炎进展而翻修者平均力线更偏外翻,因无菌性松动或下沉翻修者平均力线更偏内翻。
- 当代聚乙烯内轴型固定平台UKA获得最佳生存的机械力线可能为轻度内翻。
研究设计与样本
- 回顾性匹配病例对照研究,数据来自前瞻性机构数据库(2000年以来3351例内轴型固定平台UKA)。
- 翻修组包括因进展翻修37例和因松动翻修61例,按手术年龄、性别、BMI和术后活动度与未翻修成功组匹配。
- 成功组要求至少10年随访且Knee Society Score≥70(不因力线扣分)。
- 术后力线通过下肢全长X线片测量的髋-膝-踝(HKA)角量化。
主要发现
- 进展组术后4个月平均HKA角为0.3°±3.6°外翻,匹配成功组为4.4°±2.6°内翻(P<0.001)。
- 松动组平均HKA角为6.1°±3.1°内翻,匹配成功组为4.0°±2.7°内翻(P<0.001)。
关键数值与推荐
- 成功组定义:至少10年随访、Knee Society Score≥70且不因力线扣分。
- 进展组平均HKA角0.3°±3.6°外翻 vs 成功组4.4°±2.6°内翻(P<0.001)。
- 松动组平均HKA角6.1°±3.1°内翻 vs 成功组4.0°±2.7°内翻(P<0.001)。
临床怎么用
- 对于内轴型固定平台UKA,可考虑将术后机械力线目标设定为轻度内翻(约4°)。
- 避免过度外翻力线以减少外侧间室骨关节炎进展的风险。
- 避免过度内翻力线以减少无菌性松动或下沉的风险。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: To better define the optimal alignment target for medial fixed-bearing unicompartmental knee arthroplasty (UKA), this study compares the postoperative mechanical alignment of well-functioning UKAs against 2 groups of failed UKAs, including revisions for progression of lateral compartment osteoarthritis ("Progression") and revisions for aseptic loosening or subsidence ("Loosening"). METHODS: From our prospective institutional database of 3351 medial fixed-bearing UKAs performed since 2000, we identified 37 UKAs revised for Progression and 61 UKAs revised for Loosening. Each of these revision cohorts was matched based on age at surgery, gender, body mass index, and postoperative range of motion with unrevised UKAs that had at least 10 years of follow-up and a Knee Society Score of 70 or greater without subtracting points for alignment ("Success" groups). Postoperative alignment was quantified by the hip-knee-ankle (HKA) angle measured on long-leg alignment radiographs. RESULTS: The mean HKA angle at 4-month follow-up for the Progression group was 0.3° ± 3.6° of valgus compared to 4.4° ± 2.6° of varus for the matched Success group (P < 0.001). For the Loosening group, the mean HKA angle was 6.1° ± 3.1° of varus versus 4.0° ± 2.7° of varus for the matched Success group (P < 0.001). CONCLUSIONS: Patients with well-functioning UKAs at 10 years exhibited mild varus mechanical alignment of approximately 4°, whereas patients revised for progression of osteoarthritis averaged more valgus and those revised for loosening or subsidence averaged more varus. The optimal mechanical alignment for medial fixed-bearing UKA survival with contemporary polyethylene is likely slight varus.
引用
- Slaven SE, Cody JP, Sershon RA, et al. The Impact of Coronal Alignment on Revision in Medial Fixed-Bearing Unicompartmental Knee Arthroplasty. J Arthroplasty. 2019. PMID: 31668526. doi:10.1016/j.arth.2019.09.038
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。