文献速递脊柱外科小儿骨科

基于初诊时三维脊柱参数的青少年特发性脊柱侧凸进展预测模型

A Predictive Model of Progression for Adolescent Idiopathic Scoliosis Based on 3D Spine Parameters at First Visit.
PubMed 文献 · Spine (Phila Pa 1976) · 2020-01-01

这项前瞻性队列研究纳入2006至2010年初诊的青少年特发性脊柱侧凸患者,利用初诊时的三维脊柱参数构建预测骨骼成熟时Cobb角的模型。最终模型纳入初始骨骼成熟度、侧凸类型、额面Cobb角、最大弯曲平面角度及三维椎间盘楔形变等预测因子,决定系数R²=0.643,识别35度侧凸的阳性与阴性预测值分别为79%和94%。

要点

  • 初诊三维参数联合骨骼成熟度与侧凸类型可预测最终Cobb角,R²=0.643。
  • 模型识别35度侧凸的阳性预测值79%、阴性预测值94%。
  • 模型有助于医生在初诊时启动适当治疗。

核心结论

  • 基于初诊信息的三维脊柱参数模型可预测青少年特发性脊柱侧凸的进展,帮助医生在初诊时启动适当治疗。

研究设计与样本

  • 前瞻性队列研究,2006至2010年纳入初诊的青少年特发性脊柱侧凸患者,均行三维重建。
  • 195名参与者中172名(88%)被分析,初诊平均年龄12.5±1.3岁,平均随访至结局3.2年。
  • 采用一般线性模型后退法分析,以最终Cobb角为结局,三维脊柱参数和临床参数为预测因子。

主要发现

  • 最终模型包含显著预测因子:初始骨骼成熟度、侧凸类型、额面Cobb角、最大弯曲平面角度及三维椎间盘楔形变(T3-T4、T8-T9)。
  • 模型决定系数R²=0.643。
  • 识别35度侧凸的阳性预测值为79%,阴性预测值为94%。

关键数值与推荐

  • 最终模型纳入的预测因子包括初始骨骼成熟度、侧凸类型、额面Cobb角、最大弯曲平面角度及三维椎间盘楔形变(T3-T4、T8-T9)。
  • 模型决定系数R²=0.643。
  • 识别35度侧凸的阳性预测值79%,阴性预测值94%。

临床怎么用

  • 利用初诊时的三维脊柱参数、骨骼成熟度和侧凸类型,可预测骨骼成熟时的Cobb角,辅助制定治疗决策。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

UNLABELLED: MINI: The aim of this prospective cohort study was to improve the prediction of curve progression in AIS. By adding the 3D morphology parameters at first visit, the predictive model explains 65% of the variability. It is one of the greatest advances in the understanding of scoliosis progression in the last 30 years. STUDY DESIGN: Prospective cohort study. OBJECTIVE: The objective of the present study was to design a model of AIS progression to predict Cobb angle at full skeletal maturity, based on curve type, skeletal maturation, and 3D spine parameters available at first visit. SUMMARY OF BACKGROUND DATA: Adolescent idiopathic scoliosis (AIS) is a three-dimensional (3D) spinal deformity that affects 1% of adolescents. Curve severity is assessed using the Cobb angle. Prediction of scoliosis progression remains challenging for the treating physician and is currently based on curve type, severity, and maturity. The objective of this study was to develop a predictive model of final Cobb angle, based on 3D spine parameters at first visit, to optimize treatment. METHODS: A prospective cohort of AIS patients at first orthopedic visit was enrolled between 2006 and 2010, all with 3D reconstructions. Measurements of five types of descriptors were obtained: angle of plane of maximum curvature, Cobb angles, 3D wedging, rotation, and torsion. A general linear model analysis with backward selection was done with final Cobb angle (either just before surgery or at skeletal maturity) as outcome and 3D spine parameters and clinical parameters as predictors. RESULTS: Of 195 participants, 172 (88%) were analyzed; average age at presentation was 12.5 ± 1.3 years and mean follow-up to outcome, 3.2 years. The final model includes significant predictors: initial skeletal maturation, curve type, frontal Cobb angle, angle of plane of maximal curvature, and 3D disk wedging (T3-T4, T8-T9) and achieved a determination coefficient (R) = 0.643. Positive and negative predictive values to identify a curve of 35 degrees are 79% and 94%. CONCLUSION: This study developed a predictive model of spinal curve progression in scoliosis based on first-visit information. The model will help the treating physician to initiate appropriate treatment at first visit. LEVEL OF EVIDENCE: 3. Prospective cohort study. The objective of the present study was to design a model of AIS progression to predict Cobb angle at full skeletal maturity, based on curve type, skeletal maturation, and 3D spine parameters available at first visit. Adolescent idiopathic scoliosis (AIS) is a three-dimensional (3D) spinal deformity that affects 1% of adolescents. Curve severity is assessed using the Cobb angle. Prediction of scoliosis progression remains challenging for the treating physician and is currently based on curve type, severity, and maturity. The objective of this study was to develop a predictive model of final Cobb angle, based on 3D spine parameters at first visit, to optimize treatment. A prospective cohort of AIS patients at first orthopedic visit was enrolled between 2006 and 2010, all with 3D reconstructions. Measurements of five types of descriptors were obtained: angle of plane of maximum curvature, Cobb angles, 3D wedging, rotation, and torsion. A general linear model analysis with backward selection was done with final Cobb angle (either just before surgery or at skeletal maturity) as outcome and 3D spine parameters and clinical parameters as predictors. Of 195 participants, 172 (88%) were analyzed; average age at presentation was 12.5 ± 1.3 years and mean follow-up to outcome, 3.2 years. The final model includes significant predictors: initial skeletal maturation, curve type, frontal Cobb angle, angle of plane of maximal curvature, and 3D disk wedging (T3-T4, T8-T9) and achieved a determination coefficient (R2) = 0.643. Positive and negative predictive values to identify a curve of 35 degrees are 79% and 94%. This study developed a predictive model of spinal curve progression in scoliosis based on first-visit information. The model will help the treating physician to initiate appropriate treatment at first visit. Level of Evidence: 3.

来源:Spine (Phila Pa 1976),查看原文。版权归原作者所有。

引用

  1. Nault ML, Beauséjour M, Roy-Beaudry M, et al. A Predictive Model of Progression for Adolescent Idiopathic Scoliosis Based on 3D Spine Parameters at First Visit. Spine (Phila Pa 1976). 2020. PMID: 31703055. doi:10.1097/BRS.0000000000003316

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。