金属对金属髋关节置换术伴金属碎屑不良反应患者不存在推荐翻修手术的阈值:346例翻修的回顾性队列研究
该回顾性队列研究分析了2个欧洲中心346例因金属碎屑不良反应(ARMD)行金属对金属髋关节置换术(MoMHA)翻修的患者,发现38.5%出现不良结局。翻修时间短于4年是唯一术前预测因素(OR=2.12,CI=1.00-4.46),而单组件翻修增加不良结局风险(OR=2.99,CI=1.50-5.97)。作者结论认为不存在推荐翻修的阈值,但翻修后结局可由术者改变,采用后路入路、翻修所有组件并使用≥36 mm陶瓷对聚乙烯或金属对聚乙烯关节面可能获得最佳结局。
要点
- 38.5%的ARMD翻修患者出现不良结局,翻修时间短于4年是唯一术前预测因素(OR=2.12)。
- 单组件翻修较全组件翻修增加不良结局风险(OR=2.99,CI=1.50-5.97)。
- 后路入路、≥36 mm股骨头、陶瓷对聚乙烯或金属对聚乙烯关节面降低不良结局风险。
核心结论
- 作者结论认为,对于MoMHA伴ARMD患者不存在推荐翻修的阈值,但翻修后结局可由术者改变。
- 作者认为,若术者采用后路入路、翻修所有MoMHA组件并使用≥36 mm陶瓷对聚乙烯或金属对聚乙烯关节面,可能获得最佳结局。
研究设计与样本
- 回顾性队列研究,纳入2个欧洲中心因ARMD行MoMHA翻修的346例患者。
- 采用术前(金属离子/影像学)和术中(所见、移除/植入组件)因素预测不良结局。
- 不良结局包括术后并发症(含再翻修)、90天死亡率和较差的牛津髋关节评分。
主要发现
- 不良结局发生率为38.5%。
- 翻修时间短于4年是唯一术前预测不良结局的因素(OR=2.12,CI=1.00-4.46)。
- 翻修前金属离子和影像学不影响结局。
- 单组件翻修较全组件翻修增加不良结局风险(OR=2.99,CI=1.50-5.97)。
- 术中可改变因素降低不良结局风险:后路入路(OR=0.22,CI=0.10-0.49)、翻修股骨头尺寸≥36 mm(vs <36 mm:OR=0.37,CI=0.18-0.77)、陶瓷对聚乙烯关节面(vs 陶瓷对陶瓷:OR=0.30,CI=0.14-0.66)、金属对聚乙烯关节面(vs 陶瓷对陶瓷:OR=0.37,CI=0.17-0.83)。
临床怎么用
- 作者认为,采用后路入路、翻修所有MoMHA组件并使用≥36 mm陶瓷对聚乙烯或金属对聚乙烯关节面可能获得最佳结局。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Surgeons currently have difficulty when managing metal-on-metal hip arthroplasty (MoMHA) patients with adverse reactions to metal debris (ARMD). This stems from a lack of evidence, which is emphasized by the variability in the recommendations proposed by different worldwide regulatory authorities for considering MoMHA revision surgery. We investigated predictors of poor outcomes following MoMHA revision surgery performed for ARMD to help inform the revision threshold and type of reconstruction. METHODS: We retrospectively studied 346 MoMHA revisions for ARMD performed at 2 European centers. Preoperative (metal ions/imaging) and intraoperative (findings, components removed/implanted) factors were used to predict poor outcomes. Poor outcomes were postoperative complications (including re-revision), 90-day mortality, and poor Oxford Hip Score. RESULTS: Poor outcomes occurred in 38.5%. Shorter time (under 4 years) to revision surgery was the only preoperative predictor of poor outcomes (odds ratio [OR] = 2.12, confidence interval [CI] = 1.00-4.46). Prerevision metal ions and imaging did not influence outcomes. Single-component revisions (vs all-component revisions) increased the risk of poor outcomes (OR = 2.99, CI = 1.50-5.97). Intraoperative modifiable factors reducing the risk of poor outcomes included the posterior approach (OR = 0.22, CI = 0.10-0.49), revision head sizes ≥36 mm (vs <36 mm: OR = 0.37, CI = 0.18-0.77), ceramic-on-polyethylene revision bearings (OR vs ceramic-on-ceramic = 0.30, CI = 0.14-0.66), and metal-on-polyethylene revision bearings (OR vs ceramic-on-ceramic = 0.37, CI = 0.17-0.83). CONCLUSION: No threshold exists for recommending revision in MoMHA patients with ARMD. However postrevision outcomes were surgeon modifiable. Optimal outcomes may be achieved if surgeons use the posterior approach, revise all MoMHA components, and use ≥36 mm ceramic-on-polyethylene or metal-on-polyethylene articulations.
引用
- Matharu GS, Berryman F, Dunlop DJ, et al. No Threshold Exists for Recommending Revision Surgery in Metal-on-Metal Hip Arthroplasty Patients With Adverse Reactions to Metal Debris: A Retrospective Cohort Study of 346 Revisions. J Arthroplasty. 2019. PMID: 30992241. doi:10.1016/j.arth.2019.03.022
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。