文献速递关节外科

高孔隙度金属cone在翻修全膝关节置换术中的干骺端固定:至少两年随访研究

Metaphyseal Fixation Using Highly Porous Cones in Revision Total Knee Arthroplasty: Minimum Two Year Follow Up Study.
PubMed 文献 · J Arthroplasty · 2019-03-28

回顾62例使用高孔隙度3D打印钛金属干骺端cone的翻修全膝关节置换术,平均随访27个月,cone无翻修生存率90.2%,排除感染后为100%,无无菌性松动病例,膝关节协会评分从术前51分改善至末次随访80分,但24%患者需再次手术,感染是主要失败原因。

要点

  • 高孔隙度3D打印钛金属干骺端cone在翻修TKA中短期无翻修生存率90.2%,排除感染后100%。
  • 无无菌性松动病例,膝关节协会评分从术前51分改善至末次随访80分。
  • 24%患者需再次手术,其中感染占16%,为翻修TKA失败的主要原因。

核心结论

  • 干骺端固定对翻修TKA的生存率很重要,但翻修时遇到的松质骨和结构性骨缺损使固定具有挑战性。
  • 假体周围感染仍是翻修TKA失败的主要原因。
  • 本研究使用的3D打印技术制造的高孔隙度钛金属干骺端cone表现出优异的短期结果,无无菌性松动病例。
  • 需要进一步随访以确定这些结果能否在更长时期内保持持久。

研究设计与样本

  • 回顾性综述62例使用干骺端胫骨cone的翻修TKA,其中15例同时使用胫骨和股骨cone。
  • 患者平均年龄66岁(范围32-84),平均随访27个月(范围24-34)。
  • 38例女性、24例男性,平均体重指数33(范围18.3-62)。

主要发现

  • cone的无翻修生存率为90.2%;排除感染后生存率为100%。
  • 无无菌性松动病例。
  • 平均膝关节协会评分从术前51分改善至末次随访80分。
  • 平均膝关节协会功能评分从术前48分改善至68分。
  • 62例中15例(24%)需要额外手术:10例(16%)因感染、3例(5%)因挛缩、1例因髌骨半脱位、1例因股四头肌腱断裂。

局限性

  • 需要进一步随访以确定这些结果能否在更长时期内保持持久。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Highly porous metaphyseal cones have been introduced to restore metaphyseal integrity for improved cement interdigitation to achieve durable fixation in revision total knee arthroplasty (TKA). The purpose of this study is to review the survivorship, clinical results, and complications of revision TKA using highly porous 3-dimensionally printed titanium metaphyseal cones. METHODS: This is a review of 62 revision TKAs using metaphyseal tibial cones, with 15 cases utilizing both tibial and femoral cones. The mean age of the patients was 66 years (range 32-84) who had a mean follow-up of 27 months (range 24-34). There were 38 women and 24 men, who had a mean body mass index of 33 (range 18.3-62). RESULTS: Revision-free survival of the cones was 90.2%. If infection was excluded, survivorship was 100%. There were no cases of aseptic loosening. The mean Knee Society Score improved from 51 points preoperatively to 80 points at the time of latest follow-up. The mean Knee Society Functional Score improved from 48 points preoperatively to 68 points. A total of 15 of the 62 patients (24%) required additional surgery: 10 (16%) for infection, 3 (5%) for contracture, 1 for patellar subluxation, and 1 for quadriceps tendon rupture. CONCLUSION: Metaphyseal fixation is important for survivorship in revision TKA which can be challenging due to cancellous and structural bone loss encountered at the time of revision. Prosthetic joint infection continues to be the leading cause of failure in revision TKA. The use of highly porous titanium metaphyseal cones produced from 3-dimensionally printed technology used in this study demonstrated excellent short-term results with no cases of aseptic loosening. Further follow-up is required to determine if these results can be durable over a longer period.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Denehy KM, Abhari S, Krebs VE, et al. Metaphyseal Fixation Using Highly Porous Cones in Revision Total Knee Arthroplasty: Minimum Two Year Follow Up Study. J Arthroplasty. 2019. PMID: 31000405. doi:10.1016/j.arth.2019.03.045

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。