文献速递关节外科

模块化与一体式锥形带槽钛股骨柄翻修全髋关节置换中的股骨骨重塑:柄长度与刚度的作用

Femoral Bone Remodeling in Revision Total Hip Arthroplasty with Use of Modular Compared with Monoblock Tapered Fluted Titanium Stems: The Role of Stem Length and Stiffness.
PubMed 文献 · J Bone Joint Surg Am · 2019-01-01

一项回顾性比较研究纳入139例使用模块化锥形带槽钛柄和114例使用一体式锥形带槽钛柄的翻修全髋关节置换,比较术后影像的骨修复、应力遮挡、点焊接及透亮线。一体式组更多患者出现骨修复(p=0.009),模块化组股骨应力遮挡更重(p<0.001),柄尖端点焊接发生率模块化组88.5% vs 一体式组47.4%(p<0.001),近端部分或环形透亮线模块化组30.9% vs 一体式组14.0%(p=0.002)。

要点

  • 一体式组骨修复患者多于模块化组(p=0.009)
  • 模块化组股骨应力遮挡更重(p<0.001)
  • 柄尖端点焊接:模块化组88.5% vs 一体式组47.4%(p<0.001)

核心结论

  • 与更长更细的一体式柄相比,模块化柄在残留骨溶解区近端骨修复较少,股骨应力遮挡、柄尖端点焊接及柄周围透亮线更多,且模块化柄更硬、远端段更短。
  • 柄直径和刚度(受柄长度、曲度和模块化影响)决定了骨重塑模式。

研究设计与样本

  • 回顾性比较研究,纳入139例连续使用模块化锥形带槽钛柄翻修的THA和114例连续使用一体式锥形带槽钛柄翻修的THA。
  • 将最近随访X线片与术后即刻X线片比较,评估残留骨溶解区骨修复、股骨应力遮挡、点焊接和透亮线,并测量两种柄的直径和髓腔填充。

主要发现

  • 一体式组骨修复患者多于模块化组(p=0.009)。
  • 模块化组股骨应力遮挡较一体式组更重(p<0.001)。
  • 柄尖端点焊接发生率模块化组88.5% vs 一体式组47.4%(p<0.001)。
  • 模块化柄在模块化连接处点焊接发生率为38.8%。
  • 近端部分或环形透亮线发生率模块化组30.9% vs 一体式组14.0%(p=0.002)。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: To our knowledge, no previous studies have compared periprosthetic bone remodeling around monoblock versus modular tapered fluted titanium stems with different stem length and thickness. METHODS: A retrospective comparative study was performed on 139 consecutive total hip arthroplasties (THAs) revised with a tapered fluted modular titanium stem and 114 consecutive THAs revised with a tapered fluted monoblock titanium stem. The latest follow-up radiographs were compared with immediate postoperative radiographs to assess bone restoration in residual osteolytic areas, femoral stress-shielding, spot-welds, and radiolucent lines. Diameter and medullary canal filling of the 2 stems were measured. RESULTS: More patients in the monoblock group demonstrated osseous restoration than in the modular group (p = 0.009), and the modular stem exerted more severe stress-shielding on the femur (p < 0.001). Stem tip spot-welds developed in 88.5% of modular stems compared with 47.4% of the monoblock stems (p < 0.001). Spot-welds developed in 38.8% of modular stems at the modular junction. Partial or circumferential radiolucent lines were observed at the proximal segment of 30.9% of modular stems, compared with 14.0% of monoblock stems (p = 0.002). CONCLUSIONS: Compared with the longer and thinner monoblock stems, modular stems had less proximal osseous restoration in residual osteolytic areas and more severe femoral stress-shielding, stem tip spot-welds, and radiolucent lines around the stems, which were stiffer and had a shorter distal section. The stem diameter and stiffness (which were influenced by stem length, curvature, and modularity) determined bone remodeling patterns. LEVEL OF EVIDENCE: Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. Huang Y, Shao H, Zhou Y, et al. Femoral Bone Remodeling in Revision Total Hip Arthroplasty with Use of Modular Compared with Monoblock Tapered Fluted Titanium Stems: The Role of Stem Length and Stiffness. J Bone Joint Surg Am. 2019. PMID: 30893234. doi:10.2106/JBJS.18.00442

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。