文献速递关节外科运动医学

解剖型全肩关节置换术中三维规划、假体模板与患者特异性器械的准确性

Accuracy of 3-Dimensional Planning, Implant Templating, and Patient-Specific Instrumentation in Anatomic Total Shoulder Arthroplasty.
PubMed 文献 · J Bone Joint Surg Am · 2019-01-01

该研究纳入173例终末期盂肱关节炎患者,比较5种器械在三维CT术前规划下放置盂假体的准确性,最终归为3组分析。在几乎所有比较中,3组间盂假体方向或位置的偏差(绝对差或离群频率)无显著差异。结论认为患者特异性器械未能在三维CT规划下持续提高盂假体放置准确性。

要点

  • 在三维CT术前规划下,患者特异性器械与标准器械在盂假体放置偏差上无显著差异。
  • 研究将5种器械归为3组:标准器械、单次使用患者特异性器械、可重复使用患者特异性器械。
  • 三维CT规划结合患者特异性器械未显示能持续提高盂假体放置准确性。

核心结论

  • 本研究未证明任何类型的患者特异性器械在三维CT术前规划下能持续改善初次全肩关节置换术中盂假体放置的准确性。
  • 与无患者特异性器械的二维影像相比,术者有多种患者特异性器械选项可用于提高盂假体放置准确性。

研究设计与样本

  • 173例终末期盂肱关节炎患者纳入3项评估患者特异性器械与三维术前规划的前瞻性研究。
  • 所有患者行术前三维CT规划以确定最佳盂假体组件和导针位置,基于术者偏好。
  • 患者按术中导针放置所用器械分为5组:标准器械、标准器械联合含导针的三维盂骨模型、三维盂骨模型联合单次使用患者特异性器械、三维盂骨模型联合可重复使用患者特异性器械、可重复使用患者特异性器械联合可调节可重复使用底座。
  • 术后所有患者行三维CT比较实际与规划的盂假体组件位置,基于绝对差和离群分析比较偏离规划的程度。
  • 因初步分析显示第1组与第2组之间、第4组与第5组之间在术前因素或偏离规划方面无显著差异,最终分析归为3个主要治疗组:标准器械(第1、2组)、单次使用患者特异性器械(第3组)、可重复使用患者特异性器械(第4、5组)。

主要发现

  • 在几乎所有比较中,3个主要治疗组间盂假体方向或位置偏离规划的绝对差或离群频率无显著差异。

关键数值与推荐

  • 证据等级:治疗性II级。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Use of 3-dimensional (3D) computed tomography (CT) preoperative planning and patient-specific instrumentation has been demonstrated to improve the accuracy of glenoid implant placement in total shoulder arthroplasty (TSA). The purpose of this study was to compare the accuracy of glenoid implant placement in primary TSA among different types of instrumentation used with the 3D CT preoperative planning. METHODS: One hundred and seventy-three patients with end-stage glenohumeral arthritis were enrolled in 3 prospective studies evaluating patient-specific instrumentation and 3D preoperative planning. All patients underwent preoperative 3D CT planning to determine optimal glenoid component and guide pin position based on surgeon preference. Patients were placed into 1 of 5 instrument groups used for intraoperative guide pin placement: (1) standard instrumentation, (2) standard instrumentation combined with use of a 3D glenoid bone model containing the guide pin, (3) use of the 3D glenoid bone model combined with single-use patient-specific instrumentation, (4) use of the 3D glenoid bone model combined with reusable patient-specific instrumentation, and (5) use of reusable patient-specific instrumentation with an adjustable, reusable base. Postoperatively, all patients underwent 3D CT to compare actual versus planned glenoid component position. Deviation from the plan (in terms of orientation and location) was compared across groups on the basis of absolute differences and outlier analysis. Univariable and multivariable comparisons were performed. As the initial analyses showed no significant differences in preoperative factors or in deviation from the plan between Groups 1 and 2 or between Groups 4 and 5 across studies, the final analysis was across 3 major treatment groups: standard instrumentation (Groups 1 and 2), single-use patient-specific instrumentation (Group 3), and reusable patient-specific instrumentation (Groups 4 and 5). RESULTS: In nearly all comparisons, there were no significant differences in the deviation from the plan (absolute differences or outlier frequency) for glenoid implant orientation or location across the 3 major treatment groups. CONCLUSIONS: This study did not demonstrate that any type of patient-specific instrumentation resulted in consistent differences in accuracy of glenoid implant placement in primary TSA with 3D CT preoperative planning. Surgeons have multiple patient-specific instrumentation options available for improving accuracy of glenoid implant placement when compared with 2D imaging without patient-specific instrumentation. LEVEL OF EVIDENCE: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. Iannotti JP, Walker K, Rodriguez E, et al. Accuracy of 3-Dimensional Planning, Implant Templating, and Patient-Specific Instrumentation in Anatomic Total Shoulder Arthroplasty. J Bone Joint Surg Am. 2019. PMID: 30845039. doi:10.2106/JBJS.17.01614

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。