形态测量几何分析确定Crowe IV型髋关节全髋关节置换术中髋臼假体中心放置位置
本研究基于CT数据对52例Crowe IV型髋和50例正常髋进行形态测量几何分析,发现Crowe IV型髋臼呈独特三角形,髋臼假体理想中心位于后骨壁上份;后骨壁从上往下三分之一处为有用标志,距假体中心平均5.6 mm。
要点
- Crowe IV型髋臼形态呈独特三角形,假体理想中心位于后骨壁上份。
- 后骨壁从上往下三分之一处是放置髋臼假体的有用标志。
- 该标志距髋臼假体中心平均5.6 mm。
核心结论
- Crowe IV型髋呈独特三角形,后骨壁从上往下三分之一处是放置髋臼假体的有用标志。
研究设计与样本
- 回顾性识别52例Crowe IV型髋(42例患者;男7例、女35例;平均年龄68.5岁(32至82岁))和50例正常髋(50例患者;男8例、女42例;平均年龄60.7岁(34至86岁))行全髋关节置换术。
- 基于CT的模拟研究,将髋臼假体置于真髋臼,放射学倾角40°、前倾角20°。
- 采用广义普氏分析进行形态测量几何分析,评估髋臼形状和髋臼假体中心位置。
主要发现
- Crowe IV型髋臼形状呈独特三角形,髋臼假体理想中心位于后骨壁上份。
- 第一和第二相对扭曲分别解释34.2%和18.4%的方差,正常髋分别为28.6%和18.0%。
- 将标志定义为Crowe IV型髋后骨壁从上往下三分之一距离处,距髋臼假体中心平均距离为5.6 mm。
局限性
- 原文未报告局限性
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: We analyzed the acetabular morphology of Crowe type IV hips using CT data to identify a landmark for the ideal placement of the centre of the acetabular component, as assessed by morphometric geometrical analysis, and its reliability. PATIENTS AND METHODS: A total of 52 Crowe IV hips (42 patients; seven male, 35 female; mean age 68.5 years (32 to 82)) and 50 normal hips (50 patients; eight male, 42 female; mean age 60.7 years (34 to 86)) undergoing total hip arthroplasty were retrospectively identified. In this CT-based simulation study, the acetabular component was positioned at the true acetabulum with a radiological inclination of 40° and anteversion of 20°. Acetabular shape and the position of the centre of the acetabular component were analyzed by morphometric geometrical analysis using the generalized Procrustes analysis. RESULTS: The acetabular shapes of Crowe IV hips were distinctively triangular; the ideal position of the centre of the acetabular component was superior on the posterior bony wall. The first and second relative warps explained 34.2% and 18.4% of the variance, respectively, compared with that of 28.6% and 18.0% in normal hips. We defined the landmark as one-third the distance from top on the posterior bony wall in Crowe IV hips. The average distance from the centre of the acetabular component was 5.6 mm. CONCLUSION: Crowe IV hips are distinctively triangular; the point one-third from the top on the posterior bony wall was a useful landmark for placing the acetabular component.
引用
- Yoshitani J, Kabata T, Kajino Y, et al. Morphometric geometrical analysis to determine the centre of the acetabular component placement in Crowe type IV hips undergoing total hip arthroplasty. Bone Joint J. 2019. PMID: 30700119. doi:10.1302/0301-620X.101B2.BJJ-2018-1076.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。