文献速递骨质疏松与代谢性骨病

骨转换标志物受分析前处理方式的不同影响

Bone turnover markers are differentially affected by pre-analytical handling.
PubMed 文献 · Osteoporos Int · 2019-01-24

研究评估样本类型、血液样本分离前时间和分离至分析间隔对四种骨转换标志物稳定性的影响。P1NP和BAP在血浆和血清中离心前72小时稳定;CTX在EDTA血浆中各时间点均高于LiHep血浆和血清,且EDTA血浆延长CTX稳定性;骨钙素在所有样本类型中易降解,储存24小时后浓度显著降低。

要点

  • P1NP和BAP在血浆和血清中离心前72小时稳定。
  • CTX分析应使用EDTA血浆,其稳定性优于LiHep血浆和血清。
  • 骨钙素储存24小时后浓度显著降低,应在3小时内分析或-18°C保存。

核心结论

  • 对于P1NP和BAP,推荐使用血浆和血清。
  • CTX分析样本应采集为EDTA血浆。
  • 骨钙素分析可用任一种血浆或血清,但应在3小时内分析或保存于-18°C。

研究设计与样本

  • 研究纳入七例骨质疏松患者和三例健康对照,采集血清、EDTA血浆和锂肝素血浆样本。
  • 样本在室温下储存至多72小时后分离和分析,分离后室温储存至多72小时再分析。
  • 使用自动化iSYS IDS平台分析P1NP、BAP、CTX和骨钙素。

主要发现

  • P1NP和BAP在血浆和血清中离心前72小时稳定。
  • CTX水平在EDTA血浆中所有时间点均高于LiHep血浆和血清。
  • 使用EDTA血浆较LiHep血浆和血清延长CTX的稳定性。
  • 骨钙素在所有样本类型中呈高度降解倾向,储存24小时后浓度显著降低。

关键数值与推荐

  • P1NP和BAP:推荐使用血浆和血清。
  • CTX:样本应采集为EDTA血浆。
  • 骨钙素:可用任一种血浆或血清,但应在3小时内分析或保存于-18°C。

临床怎么用

  • P1NP和BAP检测可使用血浆或血清样本。
  • CTX检测应采集EDTA血浆样本。
  • 骨钙素检测样本应在3小时内分析或保存于-18°C。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

UNLABELLED: Given that bone turnover markers are often shipped to central laboratories, it is essential to be aware of factors that will affect stability. We have evaluated how sample type, time before separation of blood samples, and time between separation and analysis affect the stability of four bone turnover markers. INTRODUCTION: Bone turnover markers are often shipped to central laboratories for analysis, which require knowledge of the stability of the markers of interest in different sample materials. The aim of the current study was to evaluate how time before separation of blood samples and time between separation and analysis affect the stability of four bone turnover markers in serum and plasma samples. METHODS: Serum, EDTA, and Lithium heparin (LiHep) plasma samples from seven osteoporosis patients and three healthy controls were collected and stored at room temperature for up to 72 h before separation and analysis. After separation, samples were stored at room temperature for up to 72 h and re-analyzed. The bone turnover markers N-terminal pro-collagen type 1 extension pro-peptide (P1NP), bone-specific alkaline phosphatase (BAP), C-terminal teleopeptide cross links of collagen type 1 (CTX), and osteocalcin (OC) were analyzed using the automated iSYS IDS platform. RESULTS: P1NP and BAP were stable in both plasma and serum for 72 h before centrifugation. CTX levels were higher in EDTA plasma at all time points compared to LiHep plasma and serum. The use of EDTA plasma prolonged the stability of CTX as compared to LiHep plasma and serum. Osteocalcin showed high tendency to degrade in all sample types and concentrations were significantly lower after 24 h of storage. CONCLUSIONS: For the bone turnover markers P1NP and BAP, the use of both plasma and serum is recommended. Samples for CTX analysis should be taken as EDTA plasma. Samples for osteocalcin analysis can be taken in either type of plasma or serum, but should be analyzed within 3 h or preserved at - 18 °C.

来源:Osteoporos Int,查看原文。版权归原作者所有。

引用

  1. Christensen GL, Halgreen JR, Milenkovski M, et al. Bone turnover markers are differentially affected by pre-analytical handling. Osteoporos Int. 2019. PMID: 30680430. doi:10.1007/s00198-019-04837-7

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。