第二代顺序退火高交联聚乙烯在初次全髋关节置换术后至少五年股骨头穿透率
回顾性分析77髋接受顺序退火高交联聚乙烯(X3)的初次全髋关节置换,至少5年随访显示平均稳态线性股骨头穿透率为0.095 mm/y、体积穿透率为76 mm3/y;32mm头体积穿透显著小于36mm头(P=0.028),陶瓷32mm头穿透率接近钴铬36mm头的一半(P≥0.092);未观察到影像学骨溶解,作者建议更长期随访。
要点
- 顺序退火高交联聚乙烯线性穿透率0.095 mm/y,接近传统聚乙烯骨溶解阈值。
- 32mm头体积穿透显著小于36mm头(P=0.028)。
- 穿透率与年龄、BMI、UCLA活动水平、聚乙烯厚度、杯外展角或前倾角无相关性(P≥0.10)。
核心结论
- 顺序退火高交联聚乙烯的线性股骨头穿透率与传统聚乙烯骨溶解阈值几乎相同,且高于辐照后熔融高交联聚乙烯的报道。
- 数据支持高交联聚乙烯对杯方位和人口学变量具有耐受性。
- 作者建议更长期随访。
研究设计与样本
- 回顾性审查前瞻性收集的数据库,连续纳入198例使用顺序退火高交联聚乙烯(X3;Stryker,Mahwah,NJ)的非骨水泥初次全髋关节置换,手术技术标准化。
- 采用Martell法分析X线片,以至少5年和1年X线片为基线以尽量减少初始磨合期。
- 共分析77髋,随访至少5年。
主要发现
- 平均稳态线性股骨头穿透率为0.095 mm/y,平均体积穿透率为76 mm3/y。
- 32mm头体积穿透显著小于36mm头(P=0.028)。
- 陶瓷32mm头穿透率接近钴铬36mm头的一半(P≥0.092)。
- 穿透率与年龄、体重指数、加州大学洛杉矶分校活动水平、聚乙烯厚度、杯外展角或前倾角均无相关性(P≥0.10)。
- 未观察到影像学骨溶解。
关键数值与推荐
- 平均稳态线性穿透率0.095 mm/y。
- 平均稳态体积穿透率76 mm3/y。
- 32mm头体积穿透显著小于36mm头(P=0.028)。
- 陶瓷32mm头穿透率接近钴铬36mm头的一半(P≥0.092)。
- 穿透率与年龄、体重指数、加州大学洛杉矶分校活动水平、聚乙烯厚度、杯外展角或前倾角无相关性(P≥0.10)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 作者建议更长期随访。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Highly cross-linked polyethylene (HXLPE) liners in total hip arthroplasty (THA) have demonstrated decreased wear rates, resilience to cup orientation, and reduced osteolysis compared to conventional polyethylene. Sequential irradiation and annealing below the melting temperature is unique compared to most HXLPE which is irradiated and remelted. This study purpose is to provide minimum 5-year femoral head penetration rates of sequentially annealed HXLPE in primary THA. METHODS: A retrospective review of a prospectively collected database identified 198 consecutive, cementless primary THAs utilizing sequentially annealed HXLPE (X3; Stryker, Mahwah, NJ). Operative technique was standardized. Radiographs were analyzed utilizing the Martell method with minimum 5-year and 1-year radiographs as baseline to minimize the initial bedding-in period. RESULTS: Seventy-seven hips with minimum 5-year follow-up were analyzed. Mean steady state linear and volumetric head penetration rates were 0.095 mm/y and 76 mm3/y, respectively. Volumetric head penetration was significantly less for 32-mm compared to 36-mm (P = .028). In addition, less head penetration was observed for ceramic 32-mm heads at nearly half the rate compared to cobalt-chromium 36-mm heads (P ≥ .092). No correlations existed between penetration rates and age, body mass index, University of California Los Angeles Activity Level, polyethylene thickness, cup inclination, or anteversion (P ≥ .10). No radiographic osteolysis was observed. CONCLUSION: Surprisingly, linear head penetration rates of sequentially annealed HXLPE were nearly identical to the osteolysis threshold for conventional polyethylene and greater than reports of irradiated and remelted HXLPE. Furthermore, these data corroborate reports that HXLPE is resilient to cup orientation and demographic variables. Longer term follow-up is recommended.
引用
- Deckard ER, Meneghini RM. Femoral Head Penetration Rates of Second-Generation Sequentially Annealed Highly Cross-Linked Polyethylene at Minimum Five Years. J Arthroplasty. 2018. PMID: 30609952. doi:10.1016/j.arth.2018.12.004
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。