文献速递关节外科

体格参数对全膝关节置换术结局的影响

Effect of Physical Parameters on Outcomes of Total Knee Arthroplasty.
PubMed 文献 · J Bone Joint Surg Am · 2018-01-01

该研究基于单中心前瞻性关节登记数据,分析1985至2012年间16,106例患者共22,243膝初次全膝关节置换术,采用Kaplan-Meier法和Cox回归评估体重指数、体表面积、体重和身高与翻修及并发症的关联。结果显示上述体格参数增加与任何翻修手术、机械失败、无菌性松动及感染风险升高相关,体表面积和体重与机械失败结局的相关性强于体重指数或身高。证据等级为预后Level IV。

要点

  • 体重指数、体表面积、体重、身高每增加1个标准差,任何翻修手术风险均升高(HR 1.19至1.37,p<0.01)。
  • 体表面积(HR 1.35)和体重(HR 1.27)与机械失败翻修相关性高于体重指数(HR 1.15)或身高(HR 1.23)。
  • 体重指数(HR 1.22)、体表面积(HR 2.56)、体重(HR 2.54)增加与任何感染风险升高相关(p<0.01)。

核心结论

  • 体重指数、体表面积、体重和身高增加与全膝关节置换术后翻修率、无菌性松动及其他常见并发症强烈相关。
  • 体表面积和体重与机械失败结局的相关性似乎强于体重指数或身高。

研究设计与样本

  • 研究为预后Level IV,使用单中心前瞻性收集的关节登记数据。
  • 纳入1985年至2012年接受初次全膝关节置换术的连续22,243膝(16,106例患者)。
  • 采用Kaplan-Meier生存法评估翻修及其他常见并发症,Cox回归分析结局,并对体格参数使用平滑样条参数化。

主要发现

  • 体重指数、体表面积、体重和身高增加与任何翻修手术、机械失败和无菌性松动风险升高相关。
  • 任何翻修手术风险与体重指数每增加1个标准差直接相关(HR 1.19;p<0.01),体表面积(HR 1.37;p<0.01),体重(HR 1.30;p<0.01),身高(HR 1.22;p<0.01)。
  • 机械失败翻修风险:体重指数HR 1.15(p<0.01),体表面积HR 1.35(p<0.01),体重HR 1.27(p<0.01),身高HR 1.23(p<0.01)。
  • 机械失败亚组(因无菌性松动或聚乙烯磨损行翻修手术)的风险也与体表面积、体重和身高增加相关。
  • 任何感染风险与体重指数(HR 1.22;p<0.01)、体表面积(HR 2.56;p<0.01)和体重(HR 2.54;p<0.01)增加相关。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Increasing body mass index (BMI) has been shown to correlate with increased rates of complications after total knee arthroplasty. To our knowledge, body surface area, body mass, and height have not been investigated in this manner. BMI and body surface area are affected differently by changes in height, and they are affected similarly by changes in weight. The purpose of this study was to quantify revision for any reason, mechanical failure, aseptic loosening, polyethylene wear, reoperation, and any infection after total knee arthroplasty using BMI, body surface area, body mass, and height as continuous variables. METHODS: Prospectively collected data from a single institution's total joint registry were used to analyze 22,243 consecutive knees, in 16,106 patients, treated with a primary total knee arthroplasty from 1985 to 2012. The Kaplan-Meier survival method was used to evaluate revision and other common complications, with outcomes assessed using Cox regression analysis. Smoothing spline parameterization was used on physical parameters in these models. RESULTS: Increasing BMI, body surface area, body mass, and height were associated with an increased risk of any revision surgical procedure, mechanical failure, and aseptic loosening after total knee arthroplasty. The risk of a revision surgical procedure was directly associated with each 1 standard deviation increase in BMI (hazard ratio [HR], 1.19; p < 0.01), body surface area (HR, 1.37; p < 0.01), body mass (HR, 1.30; p < 0.01), and height (HR, 1.22; p < 0.01). This association was especially demonstrated with revision for mechanical failure (BMI: HR, 1.15; p < 0.01; body surface area: HR, 1.35; p < 0.01; body mass: HR, 1.27; p < 0.01; and height: HR, 1.23; p < 0.01). The risk of failure in the subgroups of mechanical failure including a revision surgical procedure for aseptic loosening or polyethylene wear was also associated with increasing body surface area, body mass, and height. Increasing BMI (HR, 1.22; p < 0.01), body surface area (HR, 2.56; p < 0.01), and body mass (HR, 2.54; p < 0.01) were also associated with increased risk of any infection. CONCLUSIONS: Increasing BMI, body surface area, body mass, and height were strongly associated with the rates of revision, aseptic loosening, and other common complications following total knee arthroplasty. Body surface area and body mass appear to correlate more strongly with mechanical failure outcomes than BMI or height. LEVEL OF EVIDENCE: Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. Christensen TC, Wagner ER, Harmsen WS, et al. Effect of Physical Parameters on Outcomes of Total Knee Arthroplasty. J Bone Joint Surg Am. 2018. PMID: 30399077. doi:10.2106/JBJS.18.00248

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。