前交叉韧带重建术中骨隧道位置常规定量评估的MRI协议验证
本研究为诊断性队列研究(证据等级2),纳入24例前交叉韧带重建失败患者,比较高分辨率MRI与3D-CT所建三维模型与术中数字化参考标准在骨隧道开口和隧道体部的几何偏差。结果显示股骨和胫骨隧道开口及隧道体部MRI与3D-CT模型同参考模型间均无显著差异,提示该MRI协议可无电离辐射地准确评估隧道位置。
要点
- 纳入24例前交叉韧带重建失败患者,术中数字化隧道开口和隧道体部作为参考标准。
- 股骨和胫骨隧道开口处MRI与3D-CT模型同参考模型比较均无显著差异(P=.9472和P=.5779)。
- 隧道体部MRI与3D-CT平均偏差股骨0.48±0.28 mm、胫骨0.46±0.27 mm,两模型同参考模型均无显著差异。
核心结论
- 高分辨率三维涡轮自旋回波质子密度序列除是评估膝关节软组织损伤的最佳模态外,还能在不使用电离辐射的情况下准确评估隧道位置。
- 该协议为常规术后评估、术前规划和临床结局评价提供了客观标准化平台,以定量评估前交叉韧带骨隧道位置和移植物方向。
研究设计与样本
- 诊断性队列研究,证据等级2。
- 纳入24例诊断为前交叉韧带重建失败的患者,按悉尼骨科研究所影像协议行MRI和3D-CT检查并将数据转换为三维模型。
- 术中于隧道开口和隧道体部(全长)数字化前次前交叉韧带重建的骨隧道,作为参考标准评估高分辨率MRI和3D-CT的准确性。
- 通过点对点比较计算基于图像的模型与参考点云之间的几何差异。
主要发现
- 隧道开口处,MRI和3D-CT模型同参考模型比较,股骨无显著差异(P=.9472),胫骨无显著差异(P=.5779)。
- 隧道体部MRI与3D-CT的平均±标准差偏差为股骨0.48±0.28 mm、胫骨0.46±0.27 mm。
- 隧道体部,MRI和3D-CT模型同参考模型比较,股骨无显著差异(P=.5730),胫骨无显著差异(P=.3002)。
关键数值与推荐
- 以术中数字化隧道开口和隧道体部点云作为参考标准。
- 通过点对点比较计算图像模型与参考点云的几何差异。
- 股骨隧道开口MRI与3D-CT模型同参考模型比较P=.9472。
- 胫骨隧道开口MRI与3D-CT模型同参考模型比较P=.5779。
- 股骨隧道体部MRI与3D-CT模型同参考模型比较P=.5730;胫骨隧道体部P=.3002。
临床怎么用
- 该MRI协议可作为无需电离辐射的客观标准化平台,用于前交叉韧带重建术后常规评估骨隧道位置和移植物方向。
- 该协议可用于前交叉韧带重建术前规划及临床结局评价。
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: No standardized methodology and objective criteria currently exist to accurately and objectively assess tunnel placement and consequent graft orientation in anterior cruciate ligament (ACL) reconstruction (ACLR) through a single imaging modality. Advances in magnetic resonance imaging (MRI) technology have enabled the use of volumetric high spatial and contrast resolution proton density-weighted sequencing, which allows precise delineation of graft orientation, tunnel position, and quantitative assessment of tunnel position relationship to adjacent reproducible anatomic landmarks. PURPOSE: To establish an MRI protocol that would provide an accurate alternative to 3-dimensional computed tomography (3D-CT) for standardized assessment of bone tunnel placement in ACLR, as a component of assessing ACLR outcomes and to assist in presurgical planning for revision ACLR. STUDY DESIGN: Cohort study (diagnosis); Level of evidence, 2. METHODS: Twenty-four participants diagnosed with a failed ACLR underwent MRI and 3D-CT per the imaging protocols of the Sydney Orthopaedic Research Institute, in which the acquired data were converted to 3D models. The bone tunnels of the previous ACLR were then intraoperatively digitized at the tunnel aperture and along the length of the tunnel (barrel) and used as the reference standard to evaluate the accuracy of high-resolution MRI and 3D-CT. Differences in geometry between the image-based model and the reference point cloud were calculated through point-to-point comparison. RESULTS: At the tunnel apertures, no significant differences were detected between the MRI and 3D-CT models versus the reference models for the femur ( P = .9472) and tibia ( P = .5779). Mean ± SD tunnel barrel deviations between MRI and 3D-CT were 0.48 ± 0.28 mm (femur) and 0.46 ± 0.27 mm (tibia). No significant differences were detected between the MRI and 3D-CT models versus the reference models for the femoral ( P = .5730) and tibial ( P = .3002) tunnel barrels. CONCLUSION: This study demonstrated that, in addition to being the optimum modality for assessment of soft tissue injury of the knee, a high-resolution 3D turbo spin echo proton density sequence can provide an accurate assessment of tunnel placement, without the use of ionizing radiation. Therefore, this protocol provides the foundation for an objective standardized platform to quantitatively evaluate the location of ACL bone tunnels and graft orientation for routine postoperative assessment, presurgical planning, and evaluation of clinical outcomes.
引用
- Grasso S, Linklater J, Li Q, et al. Validation of an MRI Protocol for Routine Quantitative Assessment of Tunnel Position in Anterior Cruciate Ligament Reconstruction. Am J Sports Med. 2018. PMID: 29589954. doi:10.1177/0363546518758950
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。