使用远端固定模块化锥形钛柄与延长转子截骨入路行全髋关节翻修术后的股骨骨量恢复模式
本研究对54例因无菌性股骨柄松动行全髋关节翻修术、采用非骨水泥双模块柄与延长转子截骨入路的患者进行影像学回顾,按Gruen分区评估术前骨丢失、新骨形成及假体直接骨接触。所有患者末次随访均恢复近端骨量,新骨形成最先见于更远端的Gruen分区;术后2年75%的患者在模块连接处出现骨性支撑,近端组件较长者趋向于更早出现模块连接处骨性支撑。作者结论为近端骨恢复呈由远及近方向,较短近端组件需要更长时间才能获得模块连接处骨性支撑,可能增加机械失败风险。
要点
- 所有患者末次随访均显示近端骨量恢复,新骨形成最先见于更远端的Gruen分区。
- 术后2年75%的患者在模块连接处出现骨性支撑。
- 近端组件较长者趋向于更早出现模块连接处骨性支撑,较短近端组件需要更长时间。
核心结论
- 近端骨恢复呈由远及近方向发生。
- 较短近端组件需要更长时间才能获得模块连接处骨性支撑,可能增加机械失败风险。
- 基于本研究,术后2年25%的病例不应期望在模块连接处出现骨性支撑。
研究设计与样本
- 对54例因无菌性股骨柄松动行全髋关节翻修术的患者进行影像学回顾。
- 手术采用延长转子截骨入路与非骨水泥双模块柄。
- 按Gruen分区划分股骨,逐区记录术前骨丢失、新松质骨形成及假体直接骨接触,并检查模块连接处与近端组件的骨性支撑。
主要发现
- 所有患者末次随访均显示近端骨量恢复。
- 新骨形成最先见于更远端的Gruen分区。
- 近端组件较长者趋向于更早出现模块连接处骨性支撑。
- 术后2年75%的患者在模块连接处出现骨性支撑。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Mechanical failure of modular revision stems is a serious complication in revision total hip arthroplasty. The lack of adequate osseous support to the proximal component, especially in cases of an extended trochanteric osteotomy approach, is considered a risk factor for stem failure. In this study, we analyze proximal bone regeneration patterns in patients undergoing revision total hip arthroplasty for aseptic stem loosening through an extended trochanteric osteotomy approach using an uncemented dual modular stem. METHODS: Fifty-four patients treated for aseptic stem loosening were radiologically reviewed. The femur was divided according to the Gruen zones. Preoperative bone loss, formation of new cancellous bone, and presence of direct osseous contact to the stem were noted right away for each Gruen zone. The presence of osseous support at the modular junction and the proximal component were examined. RESULTS: All patients showed restoration of proximal bone mass at final follow up. New bone formation was first seen in more distally located Gruen zones. Cases with longer proximal components had a trend toward earlier osseous support at the modular junction. Overall, 75% of patients showed osseous support at the modular junction 2 years after surgery. CONCLUSION: Restoration of proximal bone occurs in a distal to proximal direction. Shorter proximal components require more time until osseous support to the modular junction is achieved, which may result in a higher risk of mechanical failure. Based on this study, bony support at the modular junction should not be expected in 25% of cases 2 years after surgery.
引用
- Ladurner A, Zdravkovic V, Grob K, et al. Femoral Bone Restoration Patterns in Revision Total Hip Arthroplasty Using Distally Fixed Modular Tapered Titanium Stems and an Extended Trochanteric Osteotomy Approach. J Arthroplasty. 2018. PMID: 29599032. doi:10.1016/j.arth.2018.02.065
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。