文献速递关节外科

计算机导航在全膝关节置换术中的当前作用

Current Role of Computer Navigation in Total Knee Arthroplasty.
PubMed 文献 · J Arthroplasty · 2018-01-31

本文综述计算机辅助手术导航在全膝关节置换术中的应用现状,将其分为影像基大主机导航、无影像大主机导航和加速度计手持导航三类;现有充分设计良好的研究显示大主机与手持导航均改善假体对线精度,但除澳大利亚骨科协会国家关节置换登记处的亚组分析外,缺乏患者报告结局或长期翻修率临床优势的证据。

要点

  • 计算机辅助手术导航分影像基大主机、无影像大主机和加速度计手持导航三类。
  • 大主机与手持导航系统均改善全膝关节置换术假体对线的准确性和精确性。
  • 除澳大利亚骨科协会国家关节置换登记处亚组分析外,缺乏患者报告结局或长期翻修率优势的证据。

核心结论

  • 现有设计良好的研究足以得出结论:大主机计算机辅助手术导航和手持导航系统均改善全膝关节置换术假体对线的准确性和精确性。
  • 除澳大利亚骨科协会国家关节置换登记处提供的亚组分析外,证据库中缺乏改善患者报告结局或降低长期累积翻修率的临床优势的确证性展示。
  • 在缺乏临床证据的情况下,反对使用大主机计算机辅助手术导航的许多论点集中于系统成本过高。
  • 低成本手持计算机辅助手术导航系统的使用可能弥合这一重要差距,随着时间推移可能涌现更多临床证据。

研究设计与样本

  • 本文为叙述性综述,回顾当前文献,未报告检索范围的具体数据库、检索时间或纳入排除标准。

主要发现

  • 计算机辅助手术导航旨在改善全膝关节置换术假体定位的准确性和精确性,从而改善整体下肢力线。
  • 膝关节置换术的历史目标是使股骨和胫骨假体垂直于股骨和胫骨的机械轴,以恢复下肢机械对线。
  • 计算机辅助手术导航可分为影像基大主机导航、无影像大主机导航以及较新出现的加速度计手持导航系统三类。
  • 除澳大利亚骨科协会国家关节置换登记处的亚组分析外,缺乏患者报告结局改善或长期累积翻修率降低的确证性临床优势证据。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 除澳大利亚骨科协会国家关节置换登记处提供的亚组分析外,证据库中缺乏改善患者报告结局或降低长期累积翻修率的临床优势的确证性展示。
  • 在缺乏临床证据的情况下,反对使用大主机计算机辅助手术导航的许多论点集中于系统成本过高。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Computer-assisted surgical (CAS) navigation has been developed with the aim of improving the accuracy and precision of total knee arthroplasty (TKA) component positioning and therefore overall limb alignment. The historical goal of knee arthroplasty has been to restore the mechanical alignment of the lower limb by aligning the femoral and tibial components perpendicular to the mechanical axis of the femur and tibia. Despite over 4 decades of TKA component development and nearly 2 decades of interest in CAS, the fundamental question remains; does the alignment goal and/or the method of achieving that goal affect the outcome of the TKA in terms of patient-reported outcome measures and/or overall survivorship? The quest for reliable and reproducible achievement of the intraoperative alignment goal has been the primary motivator for the introduction, development, and refinement of CAS navigation. Numerous proprietary systems now exist, and rapid technological advancements in computer processing power are stimulating further development of robotic surgical systems. Three categories of CAS can be defined: image-based large-console navigation; imageless large-console navigation, and more recently, accelerometer-based handheld navigation systems have been developed. CONCLUSION: A review of the current literature demonstrates that there are enough well-designed studies to conclude that both large-console CAS and handheld navigation systems improve the accuracy and precision of component alignment in TKA. However, missing from the evidence base, other than the subgroup analysis provided by the Australian Orthopaedic Association National Joint Replacement Registry, are any conclusive demonstrations of a clinical superiority in terms of improved patient-reported outcome measures and/or decreased cumulative revision rates in the long term. Few authors would argue that accuracy of alignment is a goal to ignore; therefore, in the absence of clinical evidence, many of the arguments against the use of large-console CAS navigation center on the prohibitive cost of the systems. The utilization of low-cost, handheld CAS navigation systems may therefore bridge this important gap, and over time, further clinical evidence may emerge.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Jones CW, Jerabek SA. Current Role of Computer Navigation in Total Knee Arthroplasty. J Arthroplasty. 2018. PMID: 29506932. doi:10.1016/j.arth.2018.01.027

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。