文献速递关节外科

2007至2014年美国全髋关节置换术承重面趋势:陶瓷对聚乙烯的兴起

Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene.
PubMed 文献 · J Arthroplasty · 2018-01-09

该研究利用全国住院患者样本数据库分析2007至2014年全髋关节置换术承重面选择趋势,共识别2,460,640例全髋关节置换术出院记录,其中1,059,825例(43.1%)有承重面数据。金属对金属承重面使用率在2008年达到峰值40.1%后持续下降至2014年的4.0%;陶瓷对聚乙烯使用率从2007年的11.1%上升至2014年的50.8%,并在2014年超过金属对聚乙烯(42.1%)成为最常用的承重面。

要点

  • 金属对金属承重面使用率在2008年达峰值40.1%,至2014年降至4.0%。
  • 陶瓷对聚乙烯使用率从2007年的11.1%升至2014年的50.8%,2014年超过金属对聚乙烯的42.1%。
  • 研究期间共有1,059,825例(43.1%)全髋关节置换术记录了承重面数据。

核心结论

  • 研究期间金属对金属承重面使用率急剧下降,陶瓷对聚乙烯超过金属对聚乙烯成为全髋关节置换术中最常用的承重面。

研究设计与样本

  • 研究利用全国住院患者样本数据库提取2007至2014年接受初次全髋关节置换术患者的承重面数据,按金属对聚乙烯、陶瓷对聚乙烯、金属对金属和陶瓷对陶瓷分组,采用描述性统计、单因素和多因素分析比较组间差异。

主要发现

  • 研究期间共识别2,460,640例全髋关节置换术出院记录,其中1,059,825例(43.1%)有承重面数据。
  • 金属对聚乙烯496,713例(46.9%),陶瓷对聚乙烯307,907例(29.1%),金属对金属210,381例(19.9%),陶瓷对陶瓷44,823例(4.2%)。
  • 金属对金属使用率在2008年达到峰值40.1%,随后持续下降至2014年的4.0%。
  • 陶瓷对聚乙烯使用率从2007年的11.1%上升至2014年的50.8%。
  • 2014年陶瓷对聚乙烯使用率超过金属对聚乙烯,后者当年占42.1%。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Wear of the bearing surface is a critical element in determining the longevity of a total hip arthroplasty (THA). Over the past decade, concerns related to modern metal-on-metal (MoM) bearings and corrosion at the femoral head-neck interface have influenced surgeon selection of bearing surfaces. The purpose of this study is to analyze trends in THA bearing surface selection from 2007 through 2014 using a large national database. METHODS: The Nationwide Inpatient Sample database was used to extract bearing surface data from patients who underwent a primary THA between 2007 and 2014. Patients were grouped by bearing surface type: metal-on-polyethylene (MoP), ceramic-on-polyethylene (CoP), MoM, and ceramic-on-ceramic (CoC) bearings. Descriptive statistics were employed to describe trends. Univariate and multivariate analyses were performed to identify differences between bearing surface groups. RESULTS: During the study period, 2,460,640 THA discharges were identified, of which 1,059,825 (43.1%) had bearing surface data. A total of 496,713 (46.9%) MoP, 307,907 (29.1%) CoP, 210,381 (19.9%) MoM, and 44,823 (4.2%) CoC cases were identified. MoM utilization peaked in 2008 representing 40.1% of THAs implanted that year and steadily declined to 4.0% in 2014. From 2007 to 2014, the use of CoP bearing surfaces increased from 11.1% of cases in 2007 to 50.8% of cases in 2014. In 2014, CoP utilization surpassed MoP which represented 42.1% of bearing surfaces that year. CONCLUSION: During the study period, MoM bearing surfaces decreased precipitously, while CoP surpassed MoP as the most popular bearing surface used in a THA.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Heckmann ND, Sivasundaram L, Stefl MD, et al. Total Hip Arthroplasty Bearing Surface Trends in the United States From 2007 to 2014: The Rise of Ceramic on Polyethylene. J Arthroplasty. 2018. PMID: 29429883. doi:10.1016/j.arth.2017.12.040

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。