文献速递关节外科

多孔涂层髋臼翻修杯与标准杯的初始稳定性比较

Comparison of the Primary Stability of a Porous Coated Acetabular Revision Cup With a Standard Cup.
PubMed 文献 · J Arthroplasty · 2017-09-20

在10具尸体骨盆上模拟生理性部分负重循环,比较相同几何形状但表面为多孔钛与常规烧结珠钛的两种翻修杯。多孔杯平均相对微动33.42 μm,常规杯28.02 μm,两者无统计学显著差异(P = .2649),骨密度对相对微动有显著影响(P = .0406)。

要点

  • 多孔杯与常规杯在测试场景下的相对微动无统计学显著差异(P = .2649)。
  • 骨密度显著影响相对微动(P = .0406),骨密度越高相对微动越小。
  • 两种植入物相对于骨的微动均在骨整合的安全范围内。

核心结论

  • 多孔植入物在测试场景中提供与常规植入物相似的初始稳定性,两者相对于骨的微动均在骨整合的安全范围内。
  • 选择植入物类型和术后护理时必须考虑骨量。

研究设计与样本

  • 体外研究,在10具尸体骨盆上比较相同几何形状但表面性质不同的两种翻修杯:多孔钛表面与常规烧结珠钛表面。
  • 每侧随机植入其中一种植入物,在生理性循环部分负重场景下测试,使用光学测量装置测量骨与杯之间的相对微动。
  • 统计评估采用重复测量协方差分析和固定效应检验,显著性定为P < .05。

主要发现

  • 常规杯平均相对微动为28.02 μm,多孔植入物平均相对微动为33.42 μm。
  • 两种植入物在合成相对微动方面无统计学显著差异(P = .2649)。
  • 骨密度对合成相对微动有显著影响(P = .0406),两种植入物中骨密度越高相对微动越小。

临床怎么用

  • 作者认为,选择植入物类型和术后护理时必须考虑骨量。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: The number of revision hip arthroplasty procedures has been increasing substantially, with the acetabular component requiring component revision in over half of the cases. New porous implant designs attempt to improve outcomes due to improved osseointegration; however, sufficient primary stability is paramount for good osseointegration. METHODS: We compared 2 revision cups of the same geometry, yet different surface properties in an in vitro scenario: a porous titanium surface and a conventional sintered-bead titanium surface. These were tested in 10 cadaveric pelvises under a physiologic cyclic partial weight-bearing scenario. Each side was randomly implanted with one of the implants. Relative motion between the bone and cup was measured using an optical measuring device. Statistical evaluation was carried out descriptively using a covariance analysis with repeated measures and a test of fixed effects, with significance determined as P < .05. RESULTS: The conventional cup displayed an average relative motion of 28.02 μm; and the porous implant displayed an average relative motion of 33.42 μm. There was no statistically significant difference between the two with regard to the resultant relative motion (P = .2649). The bone mineral density does have a significant influence on resultant relative motion (P = .0406), with higher bone mineral density correlating with less relative motion in both implants. CONCLUSION: The porous implant provides similar primary stability to the conventional implant in the tested scenario; the motion of both implants relative to the bone was within safe limits for osseointegration. Bone stock must be considered when choosing implant type and postoperative care.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Beckmann NA, Jaeger S, Janoszka MB, et al. Comparison of the Primary Stability of a Porous Coated Acetabular Revision Cup With a Standard Cup. J Arthroplasty. 2017. PMID: 29108792. doi:10.1016/j.arth.2017.09.023

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。