文献速递关节外科

交联聚乙烯在人工全膝关节置换术中是否优于传统超高分子量聚乙烯?

Is Cross-Linked Polyethylene an Improvement Over Conventional Ultra-High Molecular Weight Polyethylene in Total Knee Arthroplasty?
PubMed 文献 · J Arthroplasty · 2017-10-10

一项基于登记系统的研究聚焦初次全膝关节置换术中的固定胫骨衬垫,对比传统聚乙烯(占87%)、交联聚乙烯(占10%)和抗氧化聚乙烯(占2%)的生存率。结果显示,交联聚乙烯对膝关节假体生存率的提升效果似乎很低甚至没有,但不同品牌交联聚乙烯之间存在差异,制造工艺可能起作用。

要点

  • 交联聚乙烯对全膝关节置换术生存率的影响似乎很低甚至没有。
  • 不同品牌交联聚乙烯之间存在生存率差异,X3优于Prolong或Smith & Nephew交联聚乙烯(P = .036)。
  • 在Zimmer LPS Flex假体中,Prolong交联聚乙烯相比传统聚乙烯甚至与更低的生存率相关。

核心结论

  • 增加交联似乎对膝关节假体生存率仅有很低的影响,甚至没有影响。
  • 不同品牌之间存在差异,制造工艺可能起作用。

研究设计与样本

  • 一项登记系统研究,聚焦初次全膝关节置换术中的固定胫骨衬垫。
  • 传统聚乙烯占衬垫的87%,交联聚乙烯占10%,抗氧化聚乙烯占2%。
  • 64%的衬垫为后稳定型。
  • 依次比较不同聚乙烯组的生存率以及主要可用交联聚乙烯的生存率。
  • 还比较了同一品牌植入物组内不同聚乙烯类型的差异,以及保留交叉韧带与后稳定型膝关节之间的差异。

主要发现

  • 在任意原因或仅无菌性松动方面,各组生存率无差异(P = .96)。
  • 比较可用交联聚乙烯时,X3的生存率优于Prolong或Smith & Nephew交联聚乙烯(P = .036)。
  • 使用相同植入物时,X3交联聚乙烯与传统聚乙烯之间无差异达到统计学显著。
  • 在Zimmer LPS Flex假体中,Prolong交联聚乙烯相比传统聚乙烯甚至与更低的生存率相关。
  • 在Stryker植入物中,仅Cox回归模型显示X3交联聚乙烯与传统聚乙烯之间存在差异,且仅在后稳定型膝关节中。

关键数值与推荐

  • 任意原因或仅无菌性松动生存率比较的P = .96。
  • X3与Prolong或Smith & Nephew交联聚乙烯生存率比较的P = .036。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Reducing polyethylene (PE) wear by increasing the cross-linking encouraged surgeons to hope for increased total knee arthroplasty (TKA) survival rates. Different methods of manufacturing cross-linked polyethylene (XLPE) were introduced, following promising in vitro results. Is there a measurable effect of cross-linking on TKA survival? METHODS: A registry study was conducted, focusing on fixed tibial inserts in primary TKA. Conventional PE represented 87% of the liners, 10% were cross-linked and 2% were antioxidant PE. Sixty-four percent of the liners were posterior-stabilized (PS). Survival of the different PE groups and survival of the main XLPE available were successively compared. We also looked for differences in the same brand implant groups with regard to PE type, as well as differences between cruciate retaining and PS knees. RESULTS: No differences were found when looking at survival for any cause or for aseptic loosening only (P = .96). When comparing the XLPE available, X3 was found to have a better survival than Prolong or Smith & Nephew XLPE (P = .036). When the same implants and X3 or conventional PE were used, no difference could reach a statistical significance. With Zimmer LPS Flex, Prolong XLPE was even associated with a lower survival compared with conventional PE. On Stryker implants, only the Cox regression model allowed highlighting a difference between X3 XLPE and conventional PE, only in PS knees. CONCLUSION: Increasing the cross-linking seems to only have a low effect, if any, on knee arthroplasty survival. Differences between brands could be found; the manufacturing process could play a role.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Boyer B, Bordini B, Caputo D, et al. Is Cross-Linked Polyethylene an Improvement Over Conventional Ultra-High Molecular Weight Polyethylene in Total Knee Arthroplasty? J Arthroplasty. 2017. PMID: 29089224. doi:10.1016/j.arth.2017.10.005

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。