文献速递关节外科

预测单髁膝关节置换术矫正大内翻畸形的机械轴可行性

Predicting the Feasibility of Correcting Mechanical Axis in Large Varus Deformities With Unicompartmental Knee Arthroplasty.
PubMed 文献 · J Arthroplasty · 2017-10-05

该研究纳入200例连续机器人辅助内侧单髁膝关节置换术(UKA)且术前内翻≥7°的患者,评估机械轴角(MAA)和关节线汇聚角(JLCA)。术后62%达到最佳对线(≤4°)、36%达到可接受对线(5°-7°),估计MAA(eMAA)可显著预测最佳对线(P < .001)。作者认为术前内翻7°-18°者可考虑内侧UKA,但>15°畸形需谨慎。

要点

  • 200例连续机器人辅助内侧UKA术前内翻≥7°患者中,术后62%达到最佳对线(≤4°),36%达到可接受对线(5°-7°)。
  • 估计MAA(eMAA,术前MAA减去JLCA)在校正年龄和性别后显著预测最佳术后对线(P < .001)。
  • 作者认为术前内翻7°-18°者可考虑内侧UKA,但>15°畸形需谨慎。

核心结论

  • 作者认为术前大内翻畸形(7°-18°)患者可考虑为内侧UKA候选者,因为98%被矫正至最佳或可接受对线,但>15°畸形需谨慎。
  • 作者指出,实现最佳对线的可行性可通过术前MAA、JLCA和年龄预测。

研究设计与样本

  • 连续纳入200例机器人臂辅助内侧UKA且术前大内翻畸形(≥7°)患者,在髋-膝-踝X线片上测量MAA和JLCA,并通过回归分析评估估计MAA(eMAA,术前MAA减JLCA)能否预测矫正可行性。

主要发现

  • 术前平均MAA为内翻10°(范围7°-18°),JLCA为5°(1°-12°),术后MAA为内翻4°(-3°至8°),矫正量为6°(1°-14°)。
  • 术后62%达到最佳对线(≤4°),36%达到可接受对线(5°-7°)。
  • 在校正年龄和性别后,eMAA是术后最佳对线的显著预测因子(P < .001)。

关键数值与推荐

  • 术后最佳对线定义为MAA≤4°,可接受对线定义为MAA 5°-7°。
  • 术前大内翻畸形定义为MAA≥7°。

临床怎么用

  • 作者认为术前内翻7°-18°者可考虑为内侧UKA候选者,但>15°畸形需谨慎。

局限性

  • 原文未报告局限性

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Due to disappointing historical outcomes of unicompartmental knee arthroplasty (UKA), Kozinn and Scott proposed strict selection criteria, including preoperative varus alignment of ≤15°, to improve the outcomes of UKA. No studies to date, however, have assessed the feasibility of correcting large preoperative varus deformities with UKA surgery. The study goals were therefore to (1) assess to what extent patients with large varus deformities could be corrected and (2) determine radiographic parameters to predict sufficient correction. METHODS: In 200 consecutive robotic-arm assisted medial UKA patients with large preoperative varus deformities (≥7°), the mechanical axis angle (MAA) and joint line convergence angle (JLCA) were measured on hip-knee-ankle radiographs. It was assessed what number of patients were corrected to optimal (≤4°) and acceptable (5°-7°) alignment, and whether the feasibility of this correction could be predicted using an estimated MAA (eMAA, preoperative MAA-JLCA) using regression analyses. RESULTS: Mean preoperative MAA was 10° of varus (range, 7°-18°), JLCA was 5° (1°-12°), postoperative MAA was 4° of varus (-3° to 8°), and correction was 6° (1°-14°). Postoperative optimal alignment was achieved in 62% and acceptable alignment in 36%. The eMAA was a significant predictor for optimal postoperative alignment, when corrected for age and gender (P < .001). CONCLUSION: Patients with large preoperative varus deformities (7°-18°) could be considered candidates for medial UKA, as 98% was corrected to optimal or acceptable alignment, although cautious approach is needed in deformities >15°. Furthermore, it was noted that the feasibility of achieving optimal alignment could be predicted using the preoperative MAA, JLCA, and age.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Kleeblad LJ, van der List JP, Pearle AD, et al. Predicting the Feasibility of Correcting Mechanical Axis in Large Varus Deformities With Unicompartmental Knee Arthroplasty. J Arthroplasty. 2017. PMID: 29074321. doi:10.1016/j.arth.2017.09.052

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。