文献速递关节外科运动医学

偏心扩髓矫正后倾损害B2型肩胛盂剩余骨质量:一项计算研究

Version Correction via Eccentric Reaming Compromises Remaining Bone Quality in B2 Glenoids: A Computational Study.
PubMed 文献 · Clin Orthop Relat Res · 2017-09-25

基于25例Walch B2型肩胛盂的CT三维重建模型模拟全肩关节置换术中的偏心扩髓,发现10°和15°后倾矫正较0°降低磨削面下第一层1毫米骨床的平均骨密度,且后倾矫正越大,前部高质量骨分布越少。

要点

  • 后倾矫正角度越大,需切除的骨量越多,尤其取自肩胛盂前部。
  • 10°和15°矫正后第一层1毫米骨床平均骨密度低于0°矫正。
  • 随矫正角度增大,B2型肩胛盂前部高质量骨逐渐减少。

核心结论

  • 在基于CT重建B2型肩胛盂模型模拟扩髓的计算研究中,低至10°的后倾矫正即可降低用于全肩关节置换术肩胛盂固定的骨床密度。
  • 后倾矫正增加导致B2型肩胛盂前部高质量骨逐渐耗竭。

研究设计与样本

  • 从111例因原发性肩关节骨关节炎接受全肩关节置换术的患者中选取25例Walch B2型肩胛盂患者的CT扫描。
  • 25例B2型患者年龄68±9岁,男性14例、女性11例。
  • 在25个CT重建的三维肩胛骨模型上模拟0°、5°、10°和15°后倾矫正的全肩关节置换术。
  • 在每个矫正角度模拟偏心扩髓后,分析磨削面下5个相邻1毫米层的骨密度(Hounsfield单位,HU)。

主要发现

  • 后倾矫正角度越大,需切除的骨量越多,尤其取自肩胛盂前部。
  • 第一层1毫米骨床平均骨密度:0°矫正609.0±103.9 HU,10°矫正523.3±79.9 HU,15°矫正479.5±81.0 HU。
  • 0°与15°矫正第一层骨床平均骨密度差值为129.5 HU(95%CI 46.3-212.8 HU),p<0.001。
  • 0°与10°矫正第一层骨床平均骨密度差值为85.7 HU(95%CI 8.6-162.9 HU),p=0.021。
  • 第二层1毫米骨床观察到类似结果。

关键数值与推荐

  • 高质量骨定义为骨密度>650 HU。
  • 模拟的后倾矫正角度为0°、5°、10°和15°。
  • 骨密度分析位于磨削面下5个相邻的1毫米层。

临床怎么用

  • 作者认为,本研究的骨密度结果可能有助于外科医生为需要持久骨支撑的B2型肩胛盂更好地规划全肩关节置换术,并有助于明确精密手术工具的开发目标。
  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Version correction via eccentric reaming reduces clinically important retroversion in Walch type B2 glenoids (those with substantial glenoid retroversion and a second, sclerotic neoglenoid cavity) before total shoulder arthroplasty (TSA). Clinically, an increased risk of glenoid component loosening in B2 glenoids was hypothesized to be the result of compromised glenoid bone quality attributable to eccentric reaming. However, no established guidelines exist regarding how much version correction can be applied without compromising the quality of glenoid bone. QUESTIONS/PURPOSES: (1) How does version correction correlate to the reaming depth and the volume of resected bone during eccentric reaming of B2 glenoids? (2) How does version correction affect the density of the remaining glenoid bone? (3) How does version correction affect the spatial distribution of high-quality bone in the remaining glenoid? METHODS: CT scans of 25 patients identified with Walch type B2 glenoids (age, 68 ± 9 years; 14 males, 11 females) were selected from a cohort of 111 patients (age, 69 ± 10 years; 50 males, 61 females) with primary shoulder osteoarthritis who underwent TSA. Virtual TSA with version corrections of 0°, 5°, 10°, and 15° was performed on 25 CT-reconstructed three-dimensional models of B2 scapulae. After simulated eccentric reaming at each version correction angle, bone density (Hounsfield units [HUs]) was analyzed in five adjacent 1-mm layers under the reamed glenoid surface. Remaining high-quality bone (> 650 HUs) distribution in each 1-mm layer at different version corrections was observed on spatial distribution maps. RESULTS: Larger version corrections required more bone resection, especially from the anterior glenoid. Mean bone densities in the first 1-mm bone bed under the reamed surface were lower with 10° (523.3 ± 79.9 HUs) and 15° (479.5 ± 81.0 HUs) version corrections relative to 0° (0°, 609.0 ± 103.9 HUs; mean difference between 0° and 15°, 129.5 HUs [95% CI, 46.3-212.8 HUs], p < 0.001; mean difference between 0° and 10°, 85.7 HUs [95% CI, 8.6-162.9 HUs], p = 0.021) version correction. Similar results were observed for the second 1-mm bone bed. Spatial distribution maps qualitatively showed a decreased frequency of high-quality bone in the anterior glenoid as version correction increased. CONCLUSIONS: A version correction as low as 10° was shown to reduce the density of the glenoid bone bed for TSA glenoid fixation in our computational study that simulated reaming on CT-reconstructed B2 glenoid models. Increased version correction resulted in gradual depletion of high-quality bone from the anterior region of B2 glenoids. CLINICAL RELEVANCE: This computational study of eccentric reaming of the glenoid before TSA quantitatively showed glenoid bone quality is sensitive to version correction via simulated eccentric reaming. The bone density results of our study may benefit surgeons to better plan TSA on B2 glenoids needing durable bone support, and help to clarify goals for development of precision surgical tools.

来源:Clin Orthop Relat Res,查看原文。版权归原作者所有。

引用

  1. Chen X, Reddy AS, Kontaxis A, et al. Version Correction via Eccentric Reaming Compromises Remaining Bone Quality in B2 Glenoids: A Computational Study. Clin Orthop Relat Res. 2017. PMID: 28948516. doi:10.1007/s11999-017-5510-7

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。