氧化铝球头对Delta内衬全髋关节置换术至少十年随访研究
本研究回顾性分析2005年8月至2007年3月在本院行氧化铝球头对Delta陶瓷内衬非骨水泥全髋关节置换术的92髋(85例患者),随访至少10年。结果显示Harris髋关节评分从术前平均58.3分改善至末次随访92.7分(P=0.02),假体无菌性松动率低,但观察到3例脱位,其中1例因Delta内衬偏心边缘磨损需手术治疗。作者认为使用32-36mm大直径球头的该组合假体在至少10年随访中表现出满意的临床和影像学结果。
要点
- 氧化铝球头对Delta内衬非骨水泥全髋关节置换术在至少10年随访中Harris髋关节评分显著改善。
- Delta陶瓷内衬可发生偏心边缘磨损,可能导致脱位并增加线性骨折风险。
- 92髋中仅1髋发生髋臼杯无菌性松动,1髋发生股骨柄无菌性松动。
核心结论
- 使用32-36mm大直径股骨头的氧化铝球头对Delta内衬非骨水泥全髋关节置换术在至少10年随访中表现出满意的临床和影像学结果。
- Delta陶瓷内衬虽已知强度高,但仍可发生偏心边缘磨损,进而导致脱位并可能增加线性骨折的可能性。
研究设计与样本
- 回顾性研究,纳入2005年8月至2007年3月在本院行氧化铝球头对Delta内衬非骨水泥全髋关节置换术的92髋(85例患者)。
- 7例患者行双侧全髋关节置换术,左侧30例,右侧48例。
- 术前诊断:股骨头坏死34髋(37%),退行性关节炎31髋(33.7%),股骨颈骨折21髋(22.8%),类风湿关节炎6髋(6.5%)。
- 所有手术均采用前外侧入路。
主要发现
- Harris髋关节评分从术前平均58.3分(范围27-76)改善至末次随访平均92.7分(范围78-98)(P=0.02)。
- 末次随访时髋关节平均活动度:屈曲116.9°,内收23.8°,外展34.6°,内旋16.3°,外旋39.2°。
- 术后疼痛:1例患者主诉腹股沟区疼痛,4例患者主诉大腿疼痛。
- 所有病例中观察到3例因外伤发生脱位,其中2例经保守治疗无复发,1例因Delta内衬偏心边缘磨损需手术治疗。
- 髋臼杯和股骨柄的无菌性松动各1髋。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: In the early days when delta ceramics were developed, there was a period of using delta ceramic liner and alumina ceramic head. Therefore, the purpose of this study is to investigate the clinical and radiological outcomes of total hip arthroplasty using delta ceramic liner on alumina ceramic head after a minimum of 10 years of follow-up and to evaluate problems of early delta ceramic liner. METHODS: Alumina on delta cementless total hip arthroplasty was performed in 92 hips (85 patients) from August 2005 to March 2007 at our hospital. Bilateral total hip arthroplasty were performed in 7 patients, 30 patients on the left side and 48 patients on the right side. Preoperative diagnosis was osteonecrosis of the femoral head in 34 hips (37%), degenerative arthritis in 31 hips (33.7%), femur neck fracture in 21 hips (22.8%), and rheumatoid arthritis in 6 hips (6.5%). All surgeries were carried out with anterolateral approach. For the clinical evaluation, Harris hip score (HHS), pain, and range of motion were assessed. Radiographs were reviewed by the authors to search for any signs of osteolysis, loosening of implants, and heterotopic ossification. RESULTS: HHS was compared between preoperative and final follow-ups. The mean HHS improved from preoperative 58.3 points (range 27-76) to 92.7 points (range 78-98) on the final follow-up (P = .02). The mean range of hip motion at the final follow-up was flexion 116.9°, adduction 23.8°, abduction 34.6°, internal rotation 16.3°, and external rotation 39.2°. As for the postoperative pain, 1 patient complained of inguinal pain and 4 patients complained of thigh pain. Because of trauma, 3 cases of dislocation were observed in all cases. There are 3 cases with dislocation and 2 cases were treated with conservative treatment without recurrence, but 1 case was required for surgical treatment due to eccentric rim wear of delta liner. The aseptic loosening of acetabular cup and femoral stem was each 1 hip. CONCLUSION: Alumina head-on-delta liner cementless THA, using a large femoral head 32-36 mm in diameter, demonstrated satisfactory clinical and radiological results in the minimum 10 years of follow-up. Eccentric rim wear can occur even in delta ceramic liners that are known to have high strength, and this can lead to dislocation which can, in turn, increase the possibility of linear fracture.
引用
- Choy WS, Cha YH, Jeon CY, et al. A Minimum Ten Years of Follow-Up of Alumina Head on Delta Liner Total Hip Arthroplasty. J Arthroplasty. 2017. PMID: 28958658. doi:10.1016/j.arth.2017.08.043
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。