文献速递关节外科

基于统计形状建模预测肱骨近端病前三维解剖

Prediction of the pre-morbid 3D anatomy of the proximal humerus based on statistical shape modelling.
PubMed 文献 · Bone Joint J · 2017-01-01

本研究基于57例肱骨CT扫描构建统计形状模型,并在第二组52例扫描上测试,通过模拟严重骨关节炎、肱骨外科颈骨折及骨折累及骨干等情形,评估该模型预测肱骨近端病前解剖的准确性。结果显示,包含干骺端时预测误差较小,排除干骺端时误差略大,结论认为该方法能准确预测病前肱骨近端解剖,可用于手术规划与重建。

要点

  • 统计形状建模可基于不同长度骨干段预测肱骨近端病前三维形态。
  • 模拟骨关节炎时,后倾角预测误差为2.9°(±2.3°),头高度误差为1.0 mm(±0.8 mm)。
  • 模拟外科颈骨折时,后倾角预测误差为3.8°(±2.9°),头高度误差为2.4 mm(±1.9 mm)。

核心结论

  • 本研究报道了一种新颖的计算机化方法,即使在挑战性情况下也能准确预测肱骨近端病前解剖。
  • 该信息可用于严重退行性骨关节炎或肱骨近端骨折患者的手术规划和手术重建。

研究设计与样本

  • 从57例肱骨CT扫描数据库手动创建三维肱骨重建,用于构建统计形状模型(SSM),并在第二组52例扫描上测试。
  • 对第二组每个肱骨创建四种不同长度骨干段的三维重建,以模拟严重骨关节炎、肱骨外科颈骨折及骨折累及骨干。
  • 将SSM应用于骨干段以评估其预测肱骨近端形态的能力,并与实际肱骨近端形态比较。

主要发现

  • 包含干骺端(模拟骨关节炎)时,肱骨头后倾角、倾斜角、高度、曲率半径、后侧偏移及内侧偏移的预测误差分别为2.9°(±2.3°)、4.0°(±3.3°)、1.0 mm(±0.8 mm)、0.8 mm(±0.6 mm)、0.7 mm(±0.5 mm)和1.0 mm(±0.7 mm)。
  • 排除干骺端(模拟外科颈骨折)时,上述指标的预测误差分别为3.8°(±2.9°)、3.9°(±3.4°)、2.4 mm(±1.9 mm)、1.3 mm(±0.9 mm)、0.8 mm(±0.5 mm)和0.9 mm(±0.6 mm)。

关键数值与推荐

  • 原文未报告诊断或治疗相关的关键阈值与推荐条款。

临床怎么用

  • 原文未据此给出临床推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIMS: Restoring the pre-morbid anatomy of the proximal humerus is a goal of anatomical shoulder arthroplasty, but reliance is placed on the surgeon's experience and on anatomical estimations. The purpose of this study was to present a novel method, 'Statistical Shape Modelling', which accurately predicts the pre-morbid proximal humeral anatomy and calculates the 3D geometric parameters needed to restore normal anatomy in patients with severe degenerative osteoarthritis or a fracture of the proximal humerus. MATERIALS AND METHODS: From a database of 57 humeral CT scans 3D humeral reconstructions were manually created. The reconstructions were used to construct a statistical shape model (SSM), which was then tested on a second set of 52 scans. For each humerus in the second set, 3D reconstructions of four diaphyseal segments of varying lengths were created. These reconstructions were chosen to mimic severe osteoarthritis, a fracture of the surgical neck of the humerus and a proximal humeral fracture with diaphyseal extension. The SSM was then applied to the diaphyseal segments to see how well it predicted proximal morphology, using the actual proximal humeral morphology for comparison. RESULTS: With the metaphysis included, mimicking osteoarthritis, the errors of prediction for retroversion, inclination, height, radius of curvature and posterior and medial offset of the head of the humerus were 2.9° (± 2.3°), 4.0° (± 3.3°), 1.0 mm (± 0.8 mm), 0.8 mm (± 0.6 mm), 0.7 mm (± 0.5 mm) and 1.0 mm (± 0.7 mm), respectively. With the metaphysis excluded, mimicking a fracture of the surgical neck, the errors of prediction for retroversion, inclination, height, radius of curvature and posterior and medial offset of the head of the humerus were 3.8° (± 2.9°), 3.9° (± 3.4°), 2.4 mm (± 1.9 mm), 1.3 mm (± 0.9 mm), 0.8 mm (± 0.5 mm) and 0.9 mm (± 0.6 mm), respectively. CONCLUSION: This study reports a novel, computerised method that accurately predicts the pre-morbid proximal humeral anatomy even in challenging situations. This information can be used in the surgical planning and operative reconstruction of patients with severe degenerative osteoarthritis or with a fracture of the proximal humerus. Cite this article: Bone Joint J 2017;99-B:927-33.

来源:Bone Joint J,查看原文。版权归原作者所有。

引用

  1. Poltaretskyi S, Chaoui J, Mayya M, et al. Prediction of the pre-morbid 3D anatomy of the proximal humerus based on statistical shape modelling. Bone Joint J. 2017. PMID: 28663399. doi:10.1302/0301-620X.99B7.BJJ-2017-0014

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。