在全膝关节翻修术中应用模块化柄优化机械对线
研究纳入2003至2013年间319例全膝关节翻修术,前瞻性记录柄长度、直径和固定方式,影像学测量三维髓腔填充比与对线。结果显示,即使校正柄尺寸和髓腔填充差异后,压配柄仍更可靠地实现理想正位对线;增加柄对骨干的填充及其解剖轴可促进准确对线。
要点
- 股骨理想对线定义为正位95°、侧位1°过伸至4°屈曲,胫骨理想正位对线为90°。
- 即使校正柄尺寸和髓腔填充差异,压配柄仍更可靠地实现理想正位对线。
- 增加骨干填充及其解剖轴的对线有助于实现准确对线。
核心结论
- 即使校正柄尺寸和髓腔填充差异后,压配柄仍更可靠地实现理想正位对线。
- 增加骨干填充及其解剖轴的对线有助于实现准确对线。
研究设计与样本
- 研究纳入2003至2013年间319例全膝关节翻修术,前瞻性记录柄长度、柄直径和柄固定方式,影像学测量三维髓腔填充比及对线。
主要发现
- 股骨理想对线定义为正位95°、侧位1°过伸至4°屈曲,胫骨理想对线定义为正位90°。
- 即使校正柄尺寸和髓腔填充差异后,压配柄仍更可靠地实现理想正位对线。
- 增加骨干填充及其解剖轴的对线有助于实现准确对线。
关键数值与推荐
- 股骨理想对线:正位95°,侧位1°过伸至4°屈曲。
- 胫骨理想对线:正位90°。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Although mechanical alignment is critical for optimal function and long-term implant durability, the role of modular stems in achieving ideal alignment is unclear. METHODS: We identified 319 revision total knee arthroplasty from 2003-2013, for which stem length, stem diameter, and stem fixation method were recorded prospectively. Three-dimensional canal-filling ratio, the product of canal-filling ratio at the stem tip in both the anteroposterior and lateral planes, and alignment were measured radiographically. RESULTS: Ideal alignment of the femur was considered to be 95° in the anteroposterior (AP) plane and from 1° of extension to 4° of flexion in the lateral plane, and ideal tibial alignment was considered to be 90° in the AP plane. Even after accounting for difference in stem size and canal-fill, ideal AP alignment was more reliably achieved with press-fit stems. CONCLUSION: Furthermore, increased engagement of the diaphysis and its anatomical axis with canal-filling stems facilitates accurate alignment.
引用
- Fleischman AN, Azboy I, Restrepo C, et al. Optimizing Mechanical Alignment With Modular Stems in Revision TKA. J Arthroplasty. 2017. PMID: 28648709. doi:10.1016/j.arth.2017.05.039
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。