文献速递关节外科脊柱外科

脊柱融合对全髋关节置换术后髋臼假体在站立与坐位功能体位下方向的影响

What is the Impact of a Spinal Fusion on Acetabular Implant Orientation in Functional Standing and Sitting Positions?
PubMed 文献 · J Arthroplasty · 2017-05-05

本研究利用EOS影像比较93例有脊柱融合史与150例无脊柱融合史的原发全髋关节置换患者,测量从站立到坐位时骶骨倾斜角与髋臼假体方向的变化。结果发现融合组骶骨倾斜角、杯外倾角和杯前倾角的变化均显著小于对照组,且每增加一个融合节段,上述变化进一步减小。结论认为脊柱融合患者腰骶交界代偿适应性降低,更长的融合或融合至骨盆会显著影响站立至坐位转换中的代偿能力。

要点

  • 脊柱融合患者从站立到坐位时骶骨倾斜角变化为-7.9°,对照组为-18.4°(P=0.0001)。
  • 融合组杯外倾角变化为4.9°,对照组为10.2°;杯前倾角变化为7.1°,对照组为12.1°(均P=0.0001)。
  • 每增加一个融合节段,骶骨倾斜角变化减少1.6°(95%CI 2.2073-1.0741),杯外倾角变化减少0.8°(95%CI 0.380-1.203),杯前倾角变化减少0.9°(95%CI 0.518-1.352)。

核心结论

  • 脊柱融合患者腰骶交界代偿适应性降低,更长的融合或融合包含骨盆会显著影响髋-脊柱生物力学及站立至坐位转换中的代偿能力。

研究设计与样本

  • 本研究为利用EOS影像的原发全髋关节置换患者对照研究,脊柱融合组93例,无脊柱融合对照组150例,均无脱位发生。

主要发现

  • 从站立到坐位,融合组骶骨倾斜角平均变化-7.9°,对照组-18.4°(P=0.0001)。
  • 从站立到坐位,融合组杯外倾角平均变化4.9°,对照组10.2°(P=0.0001)。
  • 从站立到坐位,融合组杯前倾角平均变化7.1°,对照组12.1°(P=0.0001)。
  • 每增加一个脊柱融合节段,骶骨倾斜角变化减少1.6°(95%CI 2.2073-1.0741),杯外倾角变化减少0.8°(95%CI 0.380-1.203),杯前倾角变化减少0.9°(95%CI 0.518-1.352),所有P<0.001。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: This study used EOS imaging of primary total hip arthroplasty (THA) patients, with and without predating spinal fusion, to investigate (1) the impact of spinal fusion on acetabular implant anteversion and inclination, and (2) whether more extensive spinal fusion (fusion starting above the thoracolumbar junction or extension of fusion to the sacrum) affects acetabular implant orientation differently than lumbar only spinal fusion. METHODS: Ninety-three patients had spinal fusion (case group), and 150 patients were without spinal fusion (controls). None of the patients experienced dislocation. The change in sacral slope (SS) and cup orientation from standing to sitting was measured. RESULTS: Mean SS change from the standing to sitting positions was -7.9°in the fusion group vs -18.4°in controls (P = .0001). Mean change in cup inclination from the standing to sitting positions was 4.9°in the fusion group vs 10.2°in controls (P = .0001). Mean change in cup anteversion from standing to sitting positions was 7.1°in the fusion group vs 12.1°in controls (P = .0001). For each additional level of spinal fusion, the change in SS from standing to sitting positions decreased by 1.6(95% confidence interval [CI], 2.2073-1.0741), the change in cup inclination decreased by 0.8(95% CI, 0.380-1.203), and the change in cup anteversion decreased by 0.9(95% CI, 0.518-1.352; P < .001 in all cases). CONCLUSION: Patients with spinal fusion demonstrated less adaptability of the lumbosacral junction. Longer spinal fusion or inclusion of the pelvis in the fusion critically impacts hip-spine biomechanics and significantly affects the ability to compensate in the standing-to-sitting transition.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Lazennec JY, Clark IC, Folinais D, et al. What is the Impact of a Spinal Fusion on Acetabular Implant Orientation in Functional Standing and Sitting Positions? J Arthroplasty. 2017. PMID: 28578842. doi:10.1016/j.arth.2017.04.051

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。