对1352例连续金属对聚乙烯全髋关节置换术患者机械辅助裂隙腐蚀的十年横断面研究
该横断面研究纳入2003年1月至2012年12月单一家制造商钛合金股骨柄、钴铬合金股骨头和高交联聚乙烯内衬的1352例连续全髋关节置换术患者,随访检测血清钴和铬水平。症状性机械辅助裂隙腐蚀(MACC)发生率为3.2%(43/1352),M/L Taper柄的MACC患病率(4.9%)高于其他所有Zimmer 12/14锥度柄类型合计(1.2%;P < .001)。
要点
- 症状性MACC在1352例中占3.2%(43例),按植入年份患病率从0%至10.5%不等。
- M/L Taper柄MACC患病率4.9%,高于其他Zimmer 12/14锥度柄合计1.2%(P < .001)。
- 0长度股骨头MACC显著更常见(对比-3.5 mm和+3.5 mm股骨头)。
核心结论
- 本横断面研究中金属对聚乙烯髋的MACC患病率高于既往报道。
- M/L Taper型柄以及2009年和2009年至2012年间该制造商实施的THA患者中MACC患病率显著更高。
研究设计与样本
- 2003年1月至2012年12月单一家制造商钛合金股骨柄、钴铬合金股骨头和高交联聚乙烯内衬的1352例连续全髋关节置换术。
- 患者按1年和5年间期随访监测,有症状时提前就诊。
- 骨溶解>1 cm(n = 3)或不明原因疼痛(n = 85)的患者接受检查、X线片、全血细胞计数、红细胞沉降率、C反应蛋白以及血清钴和铬水平检测。
主要发现
- 症状性MACC存在于1352例中的43例(3.2%)。
- 按植入年份MACC患病率从0%(2003年0/61;2005年0/138)至10.5%(2009年17/162)。
- M/L Taper柄MACC患病率(4.9%)高于其他所有Zimmer 12/14锥度柄类型合计(1.2%;P < .001)。
- 43例中27例(62.8%)已接受翻修手术,16例(37.2%)选择继续监测。
- 比较有症状的THA患者伴与不伴MACC,未发现人口学、临床或影像学差异。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Mechanically assisted crevice corrosion (MACC) in metal-on-polyethylene total hip arthroplasty (THA) is of concern, but its prevalence, etiology, and natural history are incompletely understood. METHODS: From January 2003 to December 2012, 1352 consecutive THA surgeries using a titanium stem, cobalt-chromium alloy femoral head, and highly cross-linked polyethylene liner from a single manufacturer were performed. Patients were followed at 1-year and 5-year intervals for surveillance, but also seen earlier if they had symptoms. Any patient with osteolysis >1 cm (n = 3) or unexplained pain (n = 85) underwent examination, radiographs, complete blood count, erythrocyte sedimentation rate, and C-reactive protein, as well as tests for serum cobalt and chromium levels. RESULTS: Symptomatic MACC was present in 43 of 1352 patients (3.2%). Prevalence of MACC by year of implant ranged from 0% (0 of 61, 2003; 0 of 138, 2005) to 10.5% (17 of 162; 2009). The M/L Taper stem had a greater prevalence (4.9%) of MACC than all other Zimmer (Zimmer, Inc, Warsaw, IN) 12/14 trunnion stem types combined (1.2%; P < .001). Twenty-seven of 43 (62.8%) patients have undergone revision surgery, and 16 of 43 (37.2%) patients have opted for ongoing surveillance. Comparing symptomatic THA patients with and without MACC, no demographic, clinical, or radiographic differences were found. MACC was significantly more common in 0 length femoral heads (compared with both -3.5 mm and +3.5 mm heads). CONCLUSION: The prevalence of MACC in metal-on-polyethylene hips is higher in this cross-sectional study than previously reported. A significantly higher prevalence was found in patients with M/L Taper style stem and THA performed both in 2009 and also between 2009 and 2012 with this manufacturer.
引用
- Hussey DK, McGrory BJ. Ten-Year Cross-Sectional Study of Mechanically Assisted Crevice Corrosion in 1352 Consecutive Patients With Metal-on-Polyethylene Total Hip Arthroplasty. J Arthroplasty. 2017. PMID: 28392135. doi:10.1016/j.arth.2017.03.020
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。