文献速递关节外科

因陶瓷轴承碎裂行全髋关节置换翻修术:翻修病例最佳实践综述

Revision Total Hip Arthroplasty for Fractured Ceramic Bearings: A Review of Best Practices for Revision Cases.
PubMed 文献 · J Arthroplasty · 2017-01-04

本综述检索MEDLINE OVID与PubMed数据库,纳入199篇文献,总结陶瓷轴承碎裂后全髋关节置换翻修术的现有证据。结论强调必须完整滑膜切除并彻底清创陶瓷碎屑;髋臼假体锁定机制损坏或位置不良应取出,股骨柄锥度损坏应取出,轻微损坏可保留股骨柄并使用第四代陶瓷头加钛套袖翻修;应避免金属轴承,尽可能使用陶瓷轴承翻修。

要点

  • 陶瓷轴承碎裂翻修须完整滑膜切除并彻底清创陶瓷碎屑。
  • 髋臼假体锁定机制损坏或位置不良时应取出。
  • 股骨柄锥度轻微损坏可保留股骨柄,使用第四代陶瓷头加钛套袖翻修。

核心结论

  • 陶瓷轴承碎裂翻修时,必须行完整滑膜切除并彻底清创碎裂陶瓷碎屑。
  • 髋臼假体固定良好但锁定机制损坏或位置不良时,应取出该髋臼假体。
  • 股骨柄锥度损坏时应取出股骨柄;若仅轻微损坏,可保留股骨柄并使用第四代陶瓷头加钛套袖进行翻修。
  • 应避免使用金属轴承,并尽可能使用陶瓷轴承进行翻修。

研究设计与样本

  • 本综述由两位作者检索MEDLINE OVID与PubMed数据库,检索词为陶瓷、骨折、全髋关节置换和翻修。
  • 检索共识别228篇文章,其中199篇被选中进行综述。

主要发现

  • 检索共识别228篇文章,其中199篇被选中进行综述。

关键数值与推荐

  • 髋臼假体固定良好但锁定机制损坏或位置不良时,应取出该髋臼假体。
  • 股骨柄锥度损坏时应取出股骨柄;若仅轻微损坏,可保留股骨柄并使用第四代陶瓷头加钛套袖进行翻修。
  • 应避免使用金属轴承,并尽可能使用陶瓷轴承进行翻修。

临床怎么用

  • 陶瓷轴承碎裂翻修时,必须行完整滑膜切除并彻底清创碎裂陶瓷碎屑。
  • 髋臼假体固定良好但锁定机制损坏或位置不良时,应取出该髋臼假体。
  • 股骨柄锥度损坏时应取出股骨柄;若仅轻微损坏,可保留股骨柄并使用第四代陶瓷头加钛套袖进行翻修。
  • 应避免使用金属轴承,并尽可能使用陶瓷轴承进行翻修。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Total hip arthroplasty revision for a fractured ceramic bearing is rare but offers unique challenges. The purpose of this review was to provide a summary of existing literature on fractured ceramic bearings. METHODS: Two authors performed a literature search of the MEDLINE OVID and PubMed databases with the following search terms: ceramic, fracture, total hip arthroplasty, and revision. RESULTS: The search identified 228 articles of which 199 were selected for review. CONCLUSIONS: It is mandatory to perform a complete synovectomy and thorough debridement of the fractured ceramic fragments. A well-fixed acetabular component should be removed if either the locking mechanism is damaged or the component is malpositioned. If the femoral stem taper is damaged, the femoral stem should be removed. However, if minimal damage is present, the femoral stem may be retained and revised using a fourth generation ceramic head with a titanium sleeve. Metal bearings should be avoided and revision with ceramic bearings should be performed whenever possible.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Rambani R, Kepecs DM, Mäkinen TJ, et al. Revision Total Hip Arthroplasty for Fractured Ceramic Bearings: A Review of Best Practices for Revision Cases. J Arthroplasty. 2017. PMID: 28189439. doi:10.1016/j.arth.2016.12.050

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。