文献速递关节外科

肥胖全膝关节置换术后胫骨灾难性内翻塌陷

Catastrophic Varus Collapse of the Tibia in Obese Total Knee Arthroplasty.
PubMed 文献 · J Arthroplasty · 2017-01-30

作者认为,肥胖患者使用小型胫骨假体时,尽管初期力线良好,仍可发生灾难性内翻塌陷;当骨小梁应力超过300,000帕斯卡时,应强烈考虑优化体重或使用更长胫骨柄。

要点

  • 35例胫骨内翻塌陷患者中,29例体重>200磅,17例>250磅,平均BMI 40.5 kg/m2
  • 35例中27例失败胫骨假体位于厂家尺寸范围的下半部分,平均术后外翻4.9°、塌陷14.9°
  • 作者认为骨小梁应力阈值超过300,000帕斯卡时,应强烈考虑优化体重或使用更长胫骨柄。

核心结论

  • 肥胖患者使用小型胫骨假体时,尽管初期全膝关节置换力线良好,仍可发生灾难性胫骨假体内翻塌陷。
  • 当骨小梁应力阈值超过300,000帕斯卡时,作者认为应强烈考虑优化患者体重或使用更长胫骨柄以分散胫骨近端应力。

研究设计与样本

  • 分析变量包括体重、力线、假体尺寸和胫骨近端骨应力;术后力线与翻修前力线进行比较。
  • 胫骨应力计算公式为:质量(kg)×重力加速度(9.8 m/s2)/胫骨表面积(mm2)=帕斯卡或N/M2。

主要发现

  • 35例中29例体重>200磅,17例体重>250磅(范围130—354磅),平均体重指数40.5 kg/m2(范围24—61 kg/m2)。
  • 35例失败胫骨假体中27例位于厂家胫骨尺寸范围的下半部分。
  • 术后力线平均外翻4.9°(范围内翻2°至外翻7°),翻修前平均塌陷14.9°(范围10°—22°)。
  • 胫骨近端骨应力平均334,324帕斯卡(范围188,524—601,416),35例中25例骨应力>300,000帕斯卡。

临床怎么用

  • 作者认为,当骨小梁应力阈值超过300,000帕斯卡时,应强烈考虑优化患者体重或使用更长胫骨柄以分散胫骨近端应力。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Mechanical complications have been underemphasized in reports on total knee arthroplasty (TKA) in obese patients. Noticing an increased prevalence of varus collapse of the tibia in obese total knee patients, we sought to determine if variability in proximal tibial cancellous bone strength played a role in failure. We attempted to define a cancellous threshold above which alternative methods of fixation should be used. METHODS: One thousand one hundred six revision TKAs from 2004-2014 identified 35 patients with varus collapse of the tibia, defined as a change in component position of >10°. Variables analyzed included weight, alignment, component size, and proximal tibial bone stress. Postoperative alignment was compared with prerevision alignment. To calculate tibial stress the following formula was used: mass (kg) × acceleration of gravity (9.8 m/s2)/tibial surface area (mm2) = pascals or N/M2. RESULTS: Twenty-nine of 35 patients weighed >200 lbs, whereas 17 of 35 patients weighed >250 lbs (range 130-354 lbs). Average body mass index was 40.5 kg/m2 (range 24-61 kg/m2). Twenty-seven of 35 failed tibial components were in the lower half of the manufacturer's tibial size offering. Postsurgical alignment averaged 4.9° valgus (range 2° varus-7° valgus) and collapsed an average of 14.9° (range 10°-22°) before revision. Proximal tibial bone stress averaged 334,324 Pascals (range 188,524-601,416). Twenty-five of 35 patients had proximal tibial bone stress >300,000 Pascals. CONCLUSION: Despite good initial primary TKA alignment, we report catastrophic varus collapse of tibial components in obese patients with small tibial components. When a cancellous threshold of 300,000 Pascals is exceeded, strong consideration should be given to either optimizing the patient's weight or using a longer tibial stem to dissipate forces on proximal tibia.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Fehring TK, Fehring KA, Anderson LA, et al. Catastrophic Varus Collapse of the Tibia in Obese Total Knee Arthroplasty. J Arthroplasty. 2017. PMID: 28202207. doi:10.1016/j.arth.2016.12.001

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。