使用打压植骨、加强网和骨水泥聚乙烯髋臼假体重建非包容性髋臼缺损
本文综述了在髋关节翻修术中采用加强网辅助打压植骨治疗非包容性髋臼缺损的技术。理想的髋臼翻修应恢复骨量、使用小号髋臼假体置于接近解剖位置并提供持久固定。打压植骨已应用超过40年,能在非包容性缺损中实现上述目标,已发表的结果良好,但该技术存在局限性,是处理翻修术中大髋臼缺损的可行选择。
要点
- 节段性或腔隙性缺损须用加强网支撑,包容腔隙内填紧压碎的新鲜冷冻异体骨。
- 骨水泥用于稳定植骨并实现翻修髋臼假体的刚性持久固定。
- 打压植骨已应用超过40年,已发表结果良好,但存在局限性。
核心结论
- 打压植骨联合加强网是处理翻修关节成形术中大髋臼缺损的可行选择,但存在其局限性。
研究设计与样本
- 本文为技术综述,总结了使用加强网辅助打压植骨治疗髋关节翻修术中非包容性髋臼缺损的技术。
主要发现
- 理想的髋臼翻修应恢复骨量、使用小号髋臼假体置于接近解剖位置并提供持久固定。
- 打压植骨已应用超过40年,能在非包容性缺损中实现上述目标。
- 已发表的结果良好。
关键数值与推荐
- 现代翻修打压植骨的原则:节段性或腔隙性缺损须用加强网支撑。
- 包容腔隙内填紧压碎的冷冻新鲜异体骨。
- 最后用丙烯酸骨水泥稳定植骨并提供翻修髋臼假体的刚性持久固定。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文提及该技术存在局限性,但未具体说明。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
This review summarises the technique of impaction grafting with mesh augmentation for the treatment of uncontained acetabular defects in revision hip arthroplasty. The ideal acetabular revision should restore bone stock, use a small socket in the near-anatomic position, and provide durable fixation. Impaction bone grafting, which has been in use for over 40 years, offers the ability to achieve these goals in uncontained defects. The precepts of modern, revision impaction grafting are that the segmental or cavitary defects must be supported with a mesh; the contained cavity is filled with vigorously impacted morselised fresh-frozen allograft; and finally, acrylic cement is used to stabilise the graft and provide rigid, long-lasting fixation of the revised acetabular component. Favourable results have been published with this technique. While having its limitations, it is a viable option to address large acetabular defects in revision arthroplasty. Cite this article: Bone Joint J 2017;99-B(1 Supple A):25-30.
引用
- Waddell BS, Della Valle AG. Reconstruction of non-contained acetabular defects with impaction grafting, a reinforcement mesh and a cemented polyethylene acetabular component. Bone Joint J. 2017. PMID: 28042115. doi:10.1302/0301-620X.99B1.BJJ-2016-0322.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。