文献速递关节外科

使用模块化非骨水泥股骨柄的翻修全髋关节置换术:中期随访

Revision Hip Arthroplasty Using a Modular, Cementless Femoral Stem: Intermediate-Term Follow-Up.
PubMed 文献 · J Arthroplasty · 2016-11-02

本研究前瞻性收集2001至2007年由两位资深作者实施的模块化非骨水泥股骨柄翻修全髋关节置换术患者资料,纳入随访至少7年的64例患者(68髋)。中位随访11.0年,Harris髋关节评分从平均38.1分改善至80.1分(P<.01),股骨柄任何原因生存率90%、因股骨柄翻修生存率94%,未出现模块化连接部相关并发症。

要点

  • 模块化非骨水泥广泛多孔涂层股骨柄翻修全髋关节置换术中期临床与影像学结果成功。
  • Harris髋关节评分从平均38.1分改善至80.1分(P<.01)。
  • 股骨柄任何原因生存率90%、因股骨柄翻修生存率94%,未出现模块化连接部并发症。

核心结论

  • 模块化非骨水泥广泛多孔涂层股骨柄在中期随访中显示出临床与影像学成功。
  • 初始远端髓内固定确保稳定性,近端模块化进一步最大化适配与填充。

研究设计与样本

  • 前瞻性收集2001至2007年由两位资深作者实施的模块化非骨水泥股骨柄翻修全髋关节置换术的临床与影像学数据。
  • 纳入随访至少7年的患者,共64例患者(68髋),翻修时中位年龄68±14岁(范围40-92岁)。
  • 中位随访11.0±1.8年(范围7-14年)。

主要发现

  • Harris髋关节评分从平均38.1分改善至80.1分(P<.01)。
  • 5髋发生一次或多次脱位。
  • 7例患者接受再手术,其中3例未涉及股骨柄。
  • 4根股骨柄因感染、复发性脱位或假体位置欠佳而需翻修。
  • 4根股骨柄下沉超过5 mm,但此后建立稳定的骨整合。

关键数值与推荐

  • 股骨柄任何原因生存率在最近随访时为90%。
  • 因股骨柄翻修生存率在最近随访时为94%。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Modular femoral stem provides flexibility in femoral reconstruction, ensuring improved "fit and fill". However, there are risks of junction failure and corrosion, as well as cost concerns in the use of modular femoral stems. METHODS: We reviewed prospectively-gathered clinical and radiographic data on revision total hip arthroplasties (THAs) performed from 2001-2007 using modular, cementless femoral component performed by the 2 senior authors. Patients with a minimum follow-up of 7 years were included in this study. RESULTS: Sixty-four patients (68 hips) with a median age of 68 ± 14 years (range 40-92 years) at revision THA were included. The median follow-up was 11.0 ± 1.8 years (range 7-14). Harris hip score, femoral stem subsidence, and stem osseointegration were recorded. The Harris hip score improved from an average of 38.1-80.1 (P < .01). Five hips had one or more dislocations. Seven patients underwent reoperations, 3 of which did not involve the stem. Four stems required revision because of infection, recurrent dislocation, or suboptimal implant position. Survival rates for any reasons and revision for femoral stems were 90% and 94%, respectively, at the most recent follow-up. Four stems subsided more than 5 mm, but established stable osseointegration thereafter. Seven nonloose stems (10.2%) demonstrated radiolucent lines in Gruen zones 1 and 7. No complications regarding the modular junction were encountered. CONCLUSION: Modular, cementless, extensively porous-coated femoral components have demonstrated intermediate-term clinical and radiographic success. Initial distal intramedullary fixation ensures stability, and proximal modularity further maximizes fit and fill.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Sivananthan S, Lim CT, Narkbunnam R, et al. Revision Hip Arthroplasty Using a Modular, Cementless Femoral Stem: Intermediate-Term Follow-Up. J Arthroplasty. 2016. PMID: 27923596. doi:10.1016/j.arth.2016.10.033

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。