文献速递关节外科

非骨水泥全髋关节置换术中短锥形柄与干骺端匹配柄的术前规划与手术技术比较

Preoperative Planning and Operative Techniques of the Shorter Tapered Stem Compared to the Metaphyseal Fit Stem in Cementless Total Hip Arthroplasty.
PubMed 文献 · J Arthroplasty · 2016-11-10

本研究纳入114例(118髋)非骨水泥全髋关节置换术患者,通过术前三维计算机规划预估干骺端匹配柄或短锥形楔形柄的前倾角,并利用导航系统调整髋臼假体前倾以维持联合前倾角在目标区。术后干骺端匹配柄组60髋中56髋(93.3%)联合前倾角在目标区,短锥形楔形柄组58髋中49髋(84.4%)在目标区,所有髋均未发生术后脱位。作者认为干骺端匹配柄在达到计划联合前倾角方面优于短锥形楔形柄,并推荐短锥形楔形柄时先置入股骨柄。

要点

  • 干骺端匹配柄组术后联合前倾角在目标区比例为93.3%(56/60髋),短锥形楔形柄组为84.4%(49/58髋)。
  • 所有髋均未观察到术后脱位。
  • 作者推荐使用短锥形楔形柄时先置入股骨柄,使用干骺端匹配柄时可后置入。

核心结论

  • 干骺端匹配柄在达到计划联合前倾角方面优于短锥形楔形柄。
  • 短锥形楔形柄可根据股骨近端解剖构型灵活旋转,因此作者推荐短锥形楔形柄时先置入股骨柄,而干骺端匹配柄可后置入。

研究设计与样本

  • 研究纳入114例患者(118髋),在非骨水泥全髋关节置换术中采用先准备髋臼的手术技术,通过术前三维计算机规划预估干骺端匹配柄或短锥形楔形柄的前倾角,并使用考虑联合前倾角的导航系统调整髋臼前倾。

主要发现

  • 使用干骺端匹配柄的全髋关节置换术后联合前倾角在目标区者为60髋中的56髋(93.3%)。
  • 使用短锥形楔形柄者58髋中49髋(84.4%)在目标区。
  • 所有髋均未观察到术后脱位。

关键数值与推荐

  • 干骺端匹配柄组联合前倾角在目标区比例为93.3%(56/60髋)。
  • 短锥形楔形柄组联合前倾角在目标区比例为84.4%(49/58髋)。

临床怎么用

  • 作者推荐使用短锥形楔形柄时先置入股骨柄,使用干骺端匹配柄时可后置入股骨柄。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: In order to prevent postoperative dislocation due to prosthetic impingement as a result of total hip arthroplasty (THA), the combined anteversion (CA) theory, which combines the anteversion of the femoral stem and the acetabular socket, has been revised in recent years. Particularly, it is necessary to keep CA within the target zone. METHODS: The aim of this study was to investigate whether postoperative CA can be kept within the target zone while using the operative technique which prepares the socket first in cementless THA, by estimating the anteversion of the metaphyseal fit stem or the shorter, tapered wedge stem using preoperative 3-dimensional computerized planning, and by adjusting the anteversion of the socket using a navigation system that considers CA. One hundred fourteen patients (118 hips) were recruited for the study. RESULTS: Postoperative CA in THA using the metaphyseal fit stem was kept within the target zone for 56 of the 60 hips (93.3%). Using the shorter, tapered wedge stem, 49 of the 58 hips (84.4%) were within the target zone. No postoperative dislocations were observed in any hips. CONCLUSION: We found that the metaphyseal fit stem worked better than the shorter, tapered wedge stem in terms of meeting the planned CA. The shorter, tapered wedge stems were flexible in rotation according to the anatomical configuration of the proximal femur. Therefore, the stem could be placed second with the metaphyseal fit stem, but we recommend placing the stem first with the shorter, tapered wedge stem.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Imai H, Miyawaki J, Kamada T, et al. Preoperative Planning and Operative Techniques of the Shorter Tapered Stem Compared to the Metaphyseal Fit Stem in Cementless Total Hip Arthroplasty. J Arthroplasty. 2016. PMID: 27913129. doi:10.1016/j.arth.2016.11.003

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。