多韧带重建股骨隧道:隧道间关系与避免汇聚的指南
基于21例患者CT构建三维膝关节模型,模拟多韧带重建股骨隧道并调整方向以评估隧道汇聚风险。结果显示FCL与PLT隧道前倾35°可消除与ACL隧道的汇聚,sMCL隧道向近端40°、向前20°–40°及POL隧道向近端20°、向前20°可避免与PCL隧道汇聚,POL和PLT隧道在轴向0°时增加突破髁间窝风险。
要点
- FCL隧道轴向和冠状面0°时与ACL隧道汇聚风险高,前倾35°可最小化汇聚。
- PLT隧道前倾35°且平行FCL隧道时未观察到与ACL隧道汇聚。
- sMCL隧道冠状面近端40°、前倾20°–40°可避免与PCL隧道汇聚。
核心结论
- 多韧带重建中股骨隧道方向需调整以避免隧道汇聚。
- 外侧FCL和PLT隧道前倾35°可消除与ACL隧道的汇聚。
- 内侧sMCL隧道向近端40°、向前及POL隧道向近端20°、向前可避免汇聚。
- POL和PLT隧道轴向0°时突破髁间窝风险增加。
研究设计与样本
- 描述性实验室研究,基于21例患者CT扫描构建三维膝关节模型。
- 使用医学图像处理软件为各主要韧带结构创建隧道,模拟多韧带重建手术入路。
- ACL和PCL隧道方向保持不变,改变FCL、PLT、sMCL和POL隧道方向以确定最小化汇聚风险的方向。
主要发现
- FCL隧道轴向和冠状面0°时与ACL隧道汇聚风险高。
- FCL隧道前倾35°可最小化与ACL隧道的汇聚。
- PLT隧道前倾35°且平行FCL隧道时未观察到隧道汇聚。
- sMCL隧道冠状面近端40°、前倾20°–40°可避免与PCL隧道汇聚。
- 同期POL重建时sMCL向近端40°、向前,POL向近端20°、向前可避免汇聚;POL和PLT隧道冠状面和轴向0°时突破髁间窝风险增加。
关键数值与推荐
- FCL隧道前倾35°以最小化与ACL隧道的汇聚。
- PLT隧道前倾35°且平行FCL隧道。
- sMCL隧道冠状面近端40°、前倾20°–40°以避免与PCL隧道汇聚。
- 同期POL重建时sMCL向近端40°、向前,POL向近端20°、向前。
临床怎么用
- 调整FCL和PLT隧道方向可降低与ACL股骨隧道的汇聚风险。
- 调整sMCL和POL隧道方向可降低与PCL股骨隧道的汇聚风险。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Knee dislocations often require multiple concurrent ligament reconstructions, which involve creating several tunnels in the distal femur. Therefore, the risk of tunnel convergence is increased because of the limited bone volume within the distal aspect of the femur. PURPOSE: To assess the risk of tunnel convergence and determine the optimal reconstruction tunnel orientations for multiple ligament reconstructions in the femur. STUDY DESIGN: Descriptive laboratory study. METHODS: Three-dimensional knee models were developed from computed tomography scans of 21 patients. Medical image processing software was used to create tunnels for each of the primary ligamentous structures, replicating a surgical approach that would be used in multiple ligament reconstructions. Thereafter, the tunnel orientation was varied in surgically relevant directions to determine orientations that minimized the risk of tunnel convergence. The orientation of the anterior cruciate ligament (ACL) and posterior cruciate ligament (PCL) tunnels was held constant throughout the study, while the orientation of the fibular collateral ligament (FCL), popliteus tendon (PLT), superficial medial collateral ligament (sMCL), and posterior oblique ligament (POL) tunnels was varied to avoid convergence. RESULTS: A high risk of tunnel convergence was observed between the FCL and ACL tunnels when the FCL tunnel was aimed at 0° in the axial and coronal planes. Aiming the FCL tunnel 35° anteriorly minimized convergence with the ACL tunnel. No tunnel convergence was observed for the PLT tunnel aimed 35° anteriorly and parallel to the FCL tunnel. To avoid convergence between the sMCL and PCL tunnels, the sMCL tunnels should be aimed 40° proximally in the coronal plane and 20° to 40° anteriorly. During concomitant POL reconstruction, the sMCL should be aimed 40° proximally and anteriorly and the POL 20° proximally and anteriorly. The PLT and POL tunnels aimed at 0° in both the coronal and axial planes had an increased risk of violating the intercondylar notch. CONCLUSION: Femoral tunnel orientations during multiple ligament reconstructions need to be adjusted to avoid tunnel convergence. On the lateral side, aiming the FCL and PLT tunnels 35° anteriorly eliminated convergence with the ACL tunnel. On the medial side, tunnel convergence was avoided by orienting the sMCL tunnel 40° proximally and anteriorly and the POL tunnel 20° proximally and anteriorly. The POL and PLT tunnels aimed at 0° in the axial plane had an increased risk of violating the intercondylar notch. CLINICAL RELEVANCE: The risk of tunnel convergence with the ACL and PCL femoral tunnels can be reduced by adjusting the orientation of the FCL and PLT tunnels and the sMCL and POL tunnels, respectively.
引用
- Moatshe G, Brady AW, Slette EL, et al. Multiple Ligament Reconstruction Femoral Tunnels: Intertunnel Relationships and Guidelines to Avoid Convergence. Am J Sports Med. 2016. PMID: 27872126. doi:10.1177/0363546516673616
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。