文献速递关节外科

金属或模块化:为何金属背衬胫骨平台在骨关节炎患者中结局劣于全聚乙烯胫骨组件

Metal or Modularity: Why Do Metal-Backed Tibias Have Inferior Outcomes to All-Polyethylene Tibial Components in Patients With Osteoarthritis.
PubMed 文献 · J Arthroplasty · 2016-10-05

该研究回顾了11653例因骨关节炎行初次全膝关节置换术的患者,其中9999例(86%)使用金属背衬(MB)胫骨组件(8470例模块化,1529例单块式),1654例(14%)使用全聚乙烯(AP)胫骨组件,平均随访8年(范围2-30年)。结果显示AP组生存率优于模块化和单块式MB组(P < .0001),且胫骨组件松动率更低(P < .0001),除<55岁和BMI≤25 kg/m2亚组外,AP组在多数年龄和BMI组中生存率更优。作者认为AP胫骨是合理选择,无论患者年龄和BMI。

要点

  • AP胫骨组件生存率优于模块化和单块式MB组件(P < .0001)。
  • AP组胫骨组件松动率更低(P < .0001),骨溶解和组件骨折率也更低。
  • 除<55岁和BMI≤25 kg/m2亚组外,AP组在多数年龄和BMI组中生存率更优。

核心结论

  • 因骨关节炎行全膝关节置换术的患者中,AP胫骨组件在多数年龄组和BMI类别中植入物生存率显著改善,作者认为AP胫骨是合理选择,无论患者年龄和BMI。

研究设计与样本

  • 回顾性分析11653例因原发性骨关节炎行初次全膝关节置换术的患者,其中9999例(86%)使用金属背衬(MB)胫骨组件(8470例模块化,1529例单块式),1654例(14%)使用全聚乙烯(AP)胫骨组件;所有患者至少随访2年,平均随访8年(范围2-30年)。

主要发现

  • 所有初次全膝关节置换术在5年、10年、15年和20年时间点的平均生存率分别为97%、92%、86%和78%;AP胫骨组件生存率优于模块化和单块式MB组件(P < .0001);AP组胫骨组件松动率更低(P < .0001),胫骨骨溶解和组件骨折率也更低;除<55岁组无差异外,AP组在多数年龄组中生存率更优;除BMI≤25 kg/m2组无差异外,AP组在所有BMI组中生存率更优。

关键数值与推荐

  • 所有初次全膝关节置换术5年、10年、15年、20年平均生存率分别为97%、92%、86%、78%。
  • AP胫骨组件生存率优于模块化和单块式MB组件(P < .0001)。
  • AP组胫骨组件松动率低于MB组(P < .0001)。
  • AP组在<55岁组和BMI≤25 kg/m2组中生存率与MB组无差异。

临床怎么用

  • 作者认为,基于这些结局,AP胫骨是合理选择,无论患者年龄和BMI。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Biomechanical studies have suggested improved stress distribution in metal-backed (MB) compared to all-polyethylene (AP) tibias, but such potential benefits have not been realized clinically. The purpose of this investigation was to analyze the outcomes of AP components in patients with primary osteoarthritis and compare the results to those obtained with MB tibial components in total knee arthroplasty (TKA). METHODS: We reviewed 11,653 patients undergoing primary TKA for osteoarthritis. There were 9999 (86%) MB (8470 modular and 1529 monoblock) and 1654 (14%) AP tibial components. All patients had at least 2 years of clinical follow-up with mean follow-up of 8 years (range, 2-30 years). RESULTS: Mean survivorship for all primary TKAs at the 5-year, 10-year, 15-year, and 20-year time points was 97%, 92%, 86%, and 78%. AP tibial components were found to have improved survivorship when compared to modular and monoblock MB counterparts (P < .0001). Likewise, AP tibial components were found to have lower rates of tibial component loosening (P < .0001), tibial osteolysis, and component fracture. Furthermore, the AP group had improved survival rates in most age-groups except <55 years where there was no difference. AP tibial components demonstrated improved survival for all body mass index (BMI) groups except in patients with a BMI ≤25 kg/m2 where there was no difference. CONCLUSION: AP tibial components had significantly improved implant survival across all age-groups and most BMI categories in patients who underwent TKA for osteoarthritis. Given these outcomes, AP tibias are a reasonable option, regardless of patient age and BMI.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Houdek MT, Watts CD, Wyles CC, et al. Metal or Modularity: Why Do Metal-Backed Tibias Have Inferior Outcomes to All-Polyethylene Tibial Components in Patients With Osteoarthritis. J Arthroplasty. 2016. PMID: 27816367. doi:10.1016/j.arth.2016.09.036

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。